|
| 1 | 4 SEATER DINING TABLE: Supply & placing of Spacewood or Equivalent Element Table Dimension - 1200 mm L x 800 mm D x 750 mm HT Table top - Table top is made up of prelam top with Knife edges. Understructure - Legs & frame is made out of Solid wood. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 2 | DINING TABLE (1200MM): Supply & placing of Spacewood or EquivalentSS finish Dining Table having dimension 1200 mm Diameter x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support.Understructure shall be made out of SS 304 grade 40 x 40 Square pipes. Understructure bottom will have Teflon bush. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 3 | SOS Make Aura Side Chair: Chair Dimension: Overall Height-950mm, Seat Size 450 mm (W) X 450 mm (D),Backrest Size 500mm(H)X 450mm (W)Understructure made up of MS of Ø25.4 X 2mm thk Pipe powder coated with black color.BACKREST:The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foam thickness 40 mm upholstered with fabric or leatherette. The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. Density (IS-7888-1976) : 50-55 Kg/m3. ARM PAD: FIXED ARM : The arm pad is injection moulded from Black polyurethane - size 250mm (L) x 50mm (W). Sample should get approved by Architect and Engineer in Charge. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 4 | DOCTOR ROOM BED: Doctor Room Bed Size of 2060mm x 960mm Adjustable Backrest: Provides flexibility for patient positioning during examinations and procedures.Durable Frame Construction: Built to last with a strong, sturdy structure.Comfortable Padding: Soft, cushioned surface to ensure patient comfort during use.Mattress Included: Comes with a mattress to enhance patient comfort. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 5 | S.S.DINING TABLE (3000X900X750MM): Supply & placing of Spacewood or EquivalentSS finish Dining Table having dimension 3000 mm L x 900 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes.Table will have provision of footrest. Legs bottom will have Teflon bush. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 6 | S.S.DINING TABLE (2400X900X750MM): Supply & placing of Spacewood or EquivalentSS finish Dining Table having dimension 2400 mm L x 900 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes.Table will have provision of footrest. Legs bottom will have Teflon bush. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 7 | S.S.DINING TABLE (1800X900X750MM): Supply & placing of Spacewood or EquivalentSS finish Dining Table having dimension 1800 mm L x 900 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes. Table will have provision of footrest. Legs bottom will have Teflon bush. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 8 | Supply & placing of Spacewood or EquivalentSS finish Dining Table having dimension 1350 mm L x 900 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes. Table will have provision of footrest. Legs bottom will have Teflon bush. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 9 | ACCENT CHAIR : Providing and supplying Single seater sofa of overall size 750 x 750 x 750 mm height made out of 75x38mm (unfinished size ) C.P.T.W. sections frame, 6 mm ply generally confirming to I.S. 303 for necessary covering from back & arm rests. The seat shall be of 125mm and back shall be of 100mm thick duly covered with tapestry fabric/conpositer leather (not less than Rs.350/- /Rmt) including necessary hardware, naval, jute cloth , casement , springs etc.complete. All exposed wooden surface shall be melamine polished and antitermite treatment to plywood and wood work with ten years guarantee bond etc. including all leads & lift etc.complete. and as directed by Engineer incharge. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 10 | HIGHBACK CHAIR (BEAT (LC)- High Back With Seat Slide): Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam.HIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H) , SEAT SIZE: 49.0 cm. (W) x 48.8 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5cm range) • Height adjustable armrest structure which is chrome plated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2. BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in black PP. OPTION OF SLIDING SEAT MECHANISM : Seat can be slide horizontaly as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair.Overall Dimensions of Chair Seat Height - min 45.0 to max 55.0cm. Height - min 102.0 to max 119.0 cm. Width & Depth of Chair as measured from pedestal - Width-750 cm and Depth-75.0 cm. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 11 | VISITORS CHAIR (BEAT (LC)- Visitor): Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. SEAT SIZE: 49.0 cm. (W) x 48.8 cm. TUBULAR VISITOR FRAME : The tubular frame is power coated cantilever structure& made of Dia. .54±0.03cm.x0.02±0.016cm.thk.M.S. E.R.W. Tube with a connecting M.S Spine welded to it .Back spine is fitted to the frame assembly. Seat Height - 47.0 cm. Height - 100.8cm. Width-57.5 cm and Depth-58.2 cm All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 12 | ONE SEATER SOFA (Flight1strsofafabRed): One Seater Sofa: Providing, placing and supplying of Sofa Dimensions W x H x D (cm)-93.5 x 84.5 x 87.5 · Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of cross sections 22x64mm and 34x64mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2 Seater and 3 Seater for additional strength and rigidity. · Foam: Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. A top layer of supersoft PU foam with density 32 kg/m3 is used to provide softness. Armrest : (1 Seater, 2 Seater, 3 Seater) · Understructure: Understructure of armrest is made up of combination of pinewood members,12mm thick Plywood, 3mm thick MDF and 2mm thick cardboard. Pinewood are of cross sections 25x25mm and 16x35mm without having major knots & defects on the surface. Complete understructure of Armrest is made by gluing, nailing & stapling. · Foam: Foaming of Armrest is done with density 32g/m3 on all the outer surfaces in order to give definition to the form of armrest.Foam of 28kg/m3 is used on the rectangular top surface of armrest. Backrest : (1 Seater, 2 Seater, 3 Seater) ·Understructure: Understructure is made up of combination of pinewood members, 12mm THK Plywood and 3mm thick MDF panels. Pinewood are of cross sections 16x35, 16x74mm without having major knots & defects on the surface. Non-woven of 100GSM is stapled on the rear side of the backrest. · Foam: Backrest is made of PU foam with density 60 kg/m3. Cushion :(1 Seater, 2 Seater, 3 Seater) Cushion is made up of loose recron filled in White non-woven bag. This stitched non-woven bag is kept inside the upholstery cover of cushion pillow.Upholstery: A]Complete body of all the SKUs is upholstered with Fabric. B]SIngle fabric variant namely 'QUEENS' is used C]Complete sofa is uplholstered with woven fabric [ELASTRON - QUEENS] which has the following colour options: 1.BOARDEAUX 2.BLACK .Legs: Rubberwood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU BLACK COAT [matt finish]. Option of Plastic injection moulded leg to be introduced with M8 steel stud to get more sturdiness and better durability. Assembly: Upholstered seat ,backrest and armrest are integral part of each other and are connected to each other with M8 bolts, nuts & washer. .Packet: Each packet of 1 seater consists of one complete upholstered sofa ,provided with 4 legs. Each packet of 2 seater consists of one complete upholstered sofa ,provided with 4 legs Each packet of 3 seater consists of one complete upholstered sofa ,provided with 4 legs. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 13 | THREE SEATER SOFA (Flight3strsofafabRed): Providing, placing and supplying of L shape Sofa Dimensions W x H x D (cm)-93.5 x 84.5 x 87.5· Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of cross sections 22x64mm and 34x64mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2 Seater and 3 Seater for additional strength and rigidity. · Foam: Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. A top layer of supersoft PU foam with density 32 kg/m3 is used to provide softness. Armrest : (1 Seater, 2 Seater, 3 Seater) · Understructure: Understructure of armrest is made up of combination of pinewood members,12mm thick Plywood, 3mm thick MDF and 2mm thick cardboard. Pinewood are of cross sections 25x25mm and 16x35mm without having major knots & defects on the surface.Complete understructure of Armrest is made by gluing, nailing & stapling. · Foam: Foaming of Armrest is done with density 32g/m3 on all the outer surfaces in order to give definition to the form of armrest.Foam of 28kg/m3 is used on the rectangular top surface of armrest Backrest : (1 Seater, 2 Seater, 3 Seater) · Understructure: Understructure is made up of combination of pinewood members, 12mm THK Plywood and 3mm thick MDF panels. Pinewood are of cross sections 16x35, 16x74mm without having major knots & defects on the surface. Non-woven of 100GSM is stapled on the rear side of the backrest. · Foam: Backrest is made of PU foam with density 60 kg/m3. Cushion :(1 Seater, 2 Seater, 3 Seater) Cushion is made up of loose recron filled in White non-woven bag. This stitched non-woven bag is kept inside the upholstery cover of cushion low.Upholstery:A]Complete body of all the SKUs is upholstered with Fabric.B]SIngle fabric variant namely 'QUEENS' is used C]Complete sofa is uplholstered with woven fabric [ELASTRON - QUEENS] which has the following colour options: 1.BOARDEAUX 2.BLACK .Legs: Rubberwood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU BLACK COAT [matt finish].Option of Plastic injection moulded leg to be introduced with M8 steel stud to get more sturdiness and better durability. Assembly: Upholstered seat ,backrest and armrest are integral part of each other and are connected to each other with M8 bolts, nuts & washer.Packet: Each packet of 1 seater consists of one complete upholstered sofa ,provided with 4 legs. Each packet of 2 seater consists of one complete upholstered sofa ,provided with 4 legs. Each packet of 3 seater consists of one complete upholstered sofa ,provided with 4 legs. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 14 | CORNER TABLE (Reson corner table Brown): Providing, placing and supplying of corner table: Dimensions W x H x D (cm) 59.7 x 60.5 x 59.7 Finish Color: Brown Weight: 12.00 kgs Warranty: 1 Year Warranty Primary Material: Wood Primary Material Subtype :Commertial ply All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 15 | L-SHAPE SOFA (Harmony V2 L shp sofa fab Grey): Harmony V2 L shp sofa fab Grey Reclines to a maximum position of 105 degrees with noiseless movement for full relaxation of the spine Bluetooth-enabled music system and flexible LED reading lamp.Upholstered in cooling polyester fabric that is easy to keep clean All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 16 | L-SHAPE SOFA IN LIVING ROOM (Plenta L-shaped): Luxurious sinking feeling with soft foam upholstered in soothing fabric. Mid-backrest ensure shoulders are well-supported. Broad armrest promotes ergonomic seating posture. The solid pinewood structure adds robustness and longevity. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 17 | CENTRAL TABLE (Davy coffee table Ce Wal): Providing, placing and supplying of coffee table: Dimensions W x H x D (cm) 60 x 456 x 110 Finish Color: Cincinnati Walnut Warranty: 1 Year Warranty Primary Material: Wood Primary Material Subtype: Engineered Wood All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 18 | CENTRAL TABLE AT LIVING ROOM (Reson coffee table Brown): Providing, placing and supplying of coffee table: Dimensions W x H x D (cm) 120 x 45 x 60 Finish Color: Remini Walnut Weight: 29.90 kgs No Of Drawers: 1 Drawer Primary Material: Wood Primary Material Subtype: Engineered Wood All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 19 | LOUNGE CHAIR (Trapeza Easy Chair Orange): Providing, placing and supplying of chair: Size : 800mmL x 700mmD x 750mmHt Fabric upholstered sofa with MS legs Wood structure : Top and bottom panels of the wooden structure is made up of 18mm thk plywood along with pine wood supporting structures in between top and bottom panels. The whole structure is covered by plywood board. Foam : Top foam of 50 density and 100mm thickness is used. Foam of 32 density and 13mm thickness is used on all sides of the sofa. Thread : The fabric is stitched with high quality Guttermens thread Understructure : Metal PC legs Fabric Brand : Sarom All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 20 | LOUNGE TABLE (Troika): Coffee Table: Legs and top circumference made from metal with black powder coating, and engineered wood with Oak veneer tabletop, gives it a sleek and contemporary aesthetic. Easy to pair with existing interiors in a space and useful for a variety of functions. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 21 | DINNING TABLE (Troy DinTbl 6Str Ceramic White): Providing, placing and supplying of Dining Table. Dimensions W x H x D 179.5 x 76 x 89.5 Finish Color: Ceramic Grey Warranty: 1 Year Warranty Delivery Condition: Knock Down Primary Material: Ceramic Primary Material Subtype: Ceramic All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 22 | DINNING CHAIR (Kosmic Grey Din Chr STLC): Grey chairs with bucket-styled seats combine class, comfort, and functionality for easy cleaning. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 23 | WARDROBE (Kalista V2 3Dr Body Dw Brown) Providing, placing and supplying of Wardrobe. OVERALL SIZE: DEPTH-600.0 MM x WIDTH 450.0 MM x HEIGH 2000.0 MM (WITHOUT LEVELLER) MATERIAL -PANELS OF DRESSING TABLE ARE MADE OF 18 MM THICK PRELAMINATED PARTICLE BOARD. ALL THE EXPOSED EDGES ARE EDGE BANDED WITH 2.0 MM THICK PVC EDGE BANDING. DOORS ARE MADE OF 18 MM THICK PU PAINTED MDF PANELS WITH COLOUR OPTIONS HARDWARE : THE HIGH QUALITY HARDWARE USED LIKE ROLLER SLIDES, HINGES, MINIFIX, DOWELS IS OF MAKE HETTICH. CONSTRUCTION: KNOCK DOWN CONSTRUCTION. PACKETS: BODY 3 PACKETS SHUTTER 1 PACKET FINISH: 1. 18 MM THICK LAMINATED COMMERTIAL PLY IS IN SONOMA OAK SHADE WITH LIPPING SHADE 399P AND DOOR IN THREE OPTIONS A) GRAPHITE GREY (NCS S 7005-Y20R) MATTE B) SHELLWINE RED (NCS S 8010-R10B) GLOSS C) ROYAL PURPLE (NCS S 6020-R40B) MATTE 2. 18 MM THICK PRELAMINATED PARTICLE BOARD IS IN CINNEMON SHADE WITH LIPPING SHADE 218P AND DOORS IN THREE OPTIONS A) ECRU (NCS S 2005-Y20R) GLOSS B) MISTY ROSE (NCS S 3010-R10B) GLOSS C) MISTERY GREY (NCS S 6005-Y80R) MATTE All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 24 | BED AT MASTER BEDROOM (Eden V2 Queen Bed Dark Waln): Providing, placing and supplying of bed: Dimensions W x H x D (cm) 158.4 x 91.8 x 213.5 Finish Color: Walnut Weight: 123.00 kgs Delivery Condition: Knock Down Storage Included: Yes Storage Mechanism: Pull-Out Storage Warranty: 1 Year Warranty Recommended Mattress Size: Depth : 198.1 cm (78\\"), Width : 152.4 (60\\"), Minimum Thickness : 10.2 cm (4\\") Primary Material: Wood Primary Material Subtype: Engineered Wood All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 25 | BED AT ROOM 1 & 2 (Adria Queen Bed Imperial Oak): Providing, placing and supplying of bed: Overall Size:Width - 1570 mm Depth — 2046 mm Height — 901 mm Material:3Bed Structure consist of metal frames made of M.S. Channels in 1.0mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986).Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board is made of 18 mm thick PrelaminatedParticle board IS:12823 Class E1 (as per EN13986) with 2mm edge banding glued with Hot Melt EVA glue. Tail board is made of 18 mm thick Prelaminated Particle board IS:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.Side rail is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.Mattress panels of Bed are made of 18 mm thick laminated Commertial ply 1S:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue. Hardware :The high quality hardware are used.Construction:Knock Down construction.Packets :2packet.Finish :.18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade. Lipping shade is 299P MAKE REHAU All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 26 | BED SIDE TABLE (Adria Bedside Tbl Imp Oak): Providing, placing and supplying of bedside table: Overall Size :Depth — 461.0 mm Width — 460.0 mm Height — 510.0 mm Material: Body panels of Bed side table are made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Drawer front are made of 18 mm thick laminated commertial ply 1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.Construction:Knock Down construction. Packets :1 packet.Finish :.18 mm thick laminated commertial ply 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P MAKE REHAU All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 27 | MASTER BEDROOM, CHAIR (Astra Star Blk Chr Tofe) : Each chair can be configured with nine different designs for the back, three leg options and the option of single-tone or dual-tone upholstery. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 28 | Supply & placing of Spacewood ( SOS) Make Amena Pouff EASY TO MAINTAIN PREMIUM FABRIC UPHOLSTREY FROM GTA FABRIC FINISH SUB STRUCTURE SHALL BE MADE OF SOLID WOOD & PLYWOOD. CAN BE OFFERED IN TWO TONE FINISH.DIMENSION - WIDTH 500 MM X 400 MM HT. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 29 | ALLAN COFFEE TABLE: Legs have small bushes at the base to prevent floor damage and scratches.Being a neutral shade (black), it is easy to style with any décor or aesthetic. All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 30 | Shoe Cabinet: Comes in different size options as a product family and can be combined with smaller cabinets-Engineered Wood All The samples Must be Approved by the Engineer In-charge and concerned Project Architect |
| 31 | EdgeBand 0.8mm: All exposed edges of furniture boards shall be provided with approved make, machine- applied PVC edge banding of 0.8 mm thickness for carcass members , fixed with hot-melt adhesive, flush trimmed and smooth finished |
| 32 | EdgeBand 2mm: All exposed edges of furniture boards shall be provided with approved make, machine- applied PVC edge banding of 2.0 mm thickness for shutters and exposed edges, fixed with hot-melt adhesive, flush trimmed and smooth finished |
| 33 | EdgeBand Glue: Edge banding shall be fixed using approved hot-melt adhesive (EVA/PUR) applied through machine process, providing strong, uniform, moisture- resistant bonding with no gaps, peeling or glue marks,Aprox 25 gram For 1 Mtr 19mm Thick |
| 34 | Minifix Set: Furniture components shall be fixed with approved make Minifix knock-down cam and dowel fittings, made of zinc alloy/steel, suitable for 18–19 mm thick boards, with corrosion-resistant finish, ensuring rigid and concealed joints, |
| 35 | L Clip: Furniture components shall be fixed with approved L-shaped metal clips, made of steel/zinc alloy, corrosion-resistant, suitable for 18–25 mm thick panels, ensuring firm, concealed joints |
| 36 | Wiremanager: Wire management shall be provided using approved PVC/ABS or nylon wire managers, suitable for desk, workstation, or cabinet use, corrosion- and fire- resistant, allowing organized routing of cables, complete with covers |
| 37 | Nob: All drawers and shutters shall be provided with approved metal/ABS knobs or handles, ergonomically designed, corrosion-resistant finish, fixed securely with screws |
| 38 | Polish Natural: All exposed surfaces of wooden furniture shall be finished with approved natural polish, applied in three or more coats, using shellac or spirit-based natural resin, sanded between coats for smooth finish, providing uniform sheen, durable protection, and natural wood appearance, |
| 39 | BTC Lipping 75x8: All exposed edges of furniture panels shall be provided with BTC edge lipping of size 75×8 mm, made of approved teakwood, well-seasoned, machine-cut, fixed with approved adhesive, flush trimmed, sanded smooth, and polished with natural polish Please Enable Macros to View BoQ information |
