|
| 1 | Taking down cement/lime plaster on brick orstone walls, etc. including raking outjoints, hacking for key, scrubbing downwith water, etc.complete all as specified. |
| 2 | M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:6 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. |
| 3 | M&L 15 mm thick cement plaster on other than fair faces of bricks or concrete walls in CM 1:4 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. |
| 4 | M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over 3mm thick wall care putty complete all as specified and directed by engineer in charge. |
| 5 | M & L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified and directed. |
| 6 | M & L for preparation of old wooden surfaces of any description not other wise decribed over 10 cm width or girth by scrubbing down, removing loose dirt or dust and applying two coats of synthetic enamel paint over prepared old wooden surfaces complete all as specified. |
| 7 | S & F PVC connections 15mm size with PTMT nuts of length 300mm but legth 600 mm complete all specified and directed. |
| 8 | M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge |
| 9 | M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge |
| 10 | S & F bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed IN REPAIRS complete all as specified. |
| 11 | M & L for PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 12 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | S&F in repair for 15 mm dia stop valves fancy type ,chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified. |
| 14 | S&F in repair vitreous china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified. |
| 15 | S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including connectipon to trap and to flishing to pipe , anti syphonage pipe etc incl provisioning of lime concrete complete all as specified. |
| 16 | S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified. |
| 17 | S&F in repair vitreous china wash down water closet pan ( pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified. |
| 18 | S&F in rep plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified. |
| 19 | M & L for fixing `in repairs` 32mm dia flush pipes of polyethylene of low or high density of PVC for low level cistern to pedestal pan/orissa pan, including all joints including all joints and making good to the floor complete all as specified and as directed by the Engineer-in-Charge |
| 20 | S&F for Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube andABS wall hook including makingconnections and fixed in position completein all respect as specified |
| 21 | S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board includind aluminum beading complete all as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:6) complete all as specified. |
| 24 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.18 but not exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:6) complete all as specified. |
| 25 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) as in skirting cut from tiles of size exc 0.18 but not exc 0.38 Sqm etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM (1:4) complete all as specified. |
| 26 | M&L for glazed white ceramic tiles in vertical surfaces such as skirting /dados and riser to steps area of tiles 450x300x7mm thick set and jointed and pointing in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 27 | M & L for chequered cement concrete tile 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors and with grey cement and pigment and screed bed of mortar 15 mm thick CM in 1:4 for laying floor finishes complete all as specified and directed. |
| 28 | M&L, 75 mm thick PCC (1:3:6) C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed W/O using extra cement. |
| 29 | M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate including demolition of PCC floor of any description complete all as specified and directed by the Engineer-in-Charge |
| 30 | Taking down Chowkhats or frames not exc. 1.5 but with shutters (without taking off shutter from the frames) complete all as specified. |
| 31 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified. |
| 32 | S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 33 | S & F 30mm thick, 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge |
| 34 | Supply and fixing for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101mmx44mmx3mm thick (b) Shutter top 80mmx44mmx3mm thick. (c) Shutter bottom 110mmx44mmx3mm thick (d) Shutter vertical 80mmx44mmx3mm thick (e) Shutter middle 80mmx44mmx3mm thick. (f) Gauging clip weighing not less than 0.097kg/metre Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane shall be measured and paid separately. . |
| 35 | Supply and fixing for aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. |
| 36 | M&L for ACP board for fixing in aluminium partition and doors complete all as specified and as directed. |
| 37 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge |
| 38 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 39 | M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 40 | S&F 3.0 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifiied |
| 41 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 42 | S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, but 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 43 | S&F 125 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 44 | S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 45 | S&F 150 mm long aluminium , anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engr-in-Charge. |
| 46 | S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. |
| 47 | S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 48 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified. |
| 49 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 51 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 53 | Supply and fix Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in 15 mm, fixed in repair all as specified and as directed. |
| 54 | S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 55 | M&L for 1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 56 | S & F in repair for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Dismantling of wall and ceiling boards(fiber, pulp, insulation or etc) or insulation boards, slabs/blankets, any thickness incl cover fillets complete all as specified and directed. |
| 58 | M & L for 6mm verneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards of an description complete all as specified and directed by Engr-in-charge |
| 59 | S & F hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on as per specifications and drawing complete all as specified and as directed by the Engineer-in-Charge |
| 60 | S & F 605mm x 605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed by the Engineer-in-Charge |
| 61 | S & F for Hangers 6mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified |
| 62 | M & L for providing and fixing 12mm thick gypsum board in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge |
| 63 | M&L for preparing newly steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide all as specified. |
| 64 | M & L for brickwork with sub-class `B` bricks, straight or curved on planexc 6m mean radius built in CM 1:4 including demolition of brickwork complete all as specified and as directed by the Engineer-in-Charge |
| 65 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified |
| 66 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified |
| 67 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified |
| 69 | M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified and as directed by the Engineer-in-Charge |
| 70 | M & L for concrete bed to drain pipes of 100mm bore, including forming cradles in cement concrete 1:3:6 type C-2 complete all as specified and as directed by the Engineer-in-Charge |
| 71 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge. |
| 72 | M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified |
| 73 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 74 | M&L TMT Bars 10mm dia and over in reinforcement,cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips complete all as specifed and directed. |
| 75 | Dismantling timber scantling 40 sqm and cover in section in any position complete all as specified and directed. |
| 76 | S&F second class soft wood timber framed and fixed clean sawn in scantling complete all as specified and directed. |
| 77 | Dismantling boarding , any description fixed in any position with nails complete as specified and directed |
| 78 | S & F in repair second class softwood 30 mm thick boarding and fixed with nails in any situation clean sawn with butt joints complete all as specified and directed. |
| 79 | M&L Lagging to pipe of internal dia 15mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20mm mesh conforming to IS 9842 complete all as specified and as directed . |
| 80 | M&L Lagging to pipe of internal dia 20 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20mm mesh conforming to IS 9842 complete all as specified and as directed . |
| 81 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 82 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 83 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 84 | M & L for 100mm thick PCC(1:3:6) using 20mm graded stone aggregate as in plinth protection finished even and smoth without using extra cement. |
| 85 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base of floor all as specified. |
| 86 | M & L 40mm thick Damp proof course to horizontal or vertical surfaces in cement mortar 1:2:4 Type B-0 including necessary formwork |
| 87 | Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendants, light fitting and making good the distributed surfaces of walls, floors as existing |
| 88 | Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface. |
| 89 | Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC casing & caping with mild steel modular sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaust point/ bell point controlled by one switch 5 Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) |
| 90 | All as per the item No 89 but for one socket outlet 5 Amps on same board using cable 1.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 91 | All as per the item No 89 but for one socket outlet 5 Amps on indep board using cable 1.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 92 | All as per the item No 89 but for one socket outlet 15 Amps on independant board using cable 2.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 93 | Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed |
| 94 | Sheet metal enclosure single door for DBs when MCBs to be used SPN-4 way with 200 Amp rated bus bar complete all as specified and directed |
| 95 | S&F in repairs for MCB SPN 32 Amps, 240 V 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-chage. |
| 96 | S&F in repairs for MCB SP 6 TO 32 Amps 10 KA 240 V 'B' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-chage. |
| 97 | S & F white cover plate with frame, 6 module complete all as specified and directed by Engr-in-chage. |
| 98 | S & F white cover plate with frame, 4 module complete all as specified and directed by Engr-in-chage. |
| 99 | S & F white cover plate with frame, 3 module complete all as specified and directed by Engr-in-chage. |
| 100 | S & F Metal flush box 6 module complete all as specified and directed by Engr-in-chage. |
| 101 | S & F Metal flush box 4 module complete all as specified and directed by Engr-in-chage. |
| 102 | S& F Metal flush box but 3 module complete all as specified and directed by Engr-in-chage. |
| 103 | S&F in replacement modular Switch socket outlet 3 pin, 16 amp, flush type complete all as specified and directed by Engr-in-chage. |
| 104 | S & F in replacement modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-chage. |
| 105 | S&F in replacement Modular switch 1 way 6A, 1 module complete all as specified and directed by Engr-in-chage. |
| 106 | S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type complete all as specified and directed by Engr-in-chage. |
| 107 | S & F in replacement of tube light fitting 1x 25 watts 4 feet with LED batten with aluminium housing and integrated electronic driver in cluding LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. |
| 108 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 109 | M&L Sub main wiring complete with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed, 6 sqmm, two run 1100 volts grade, incl drawn through PVC sutable size conduit and 6 sqmm single run for earthing. |
| 110 | Supply and fixing Wall mount fan complete with accessories, 230 V, 450 mm sweep, 1300 RPM Min air delivery 60 CMM with service value 6.00 BEE. Five star rated complete all as specified and directed by Engr-in-charge. |
| 111 | Taking down old unserviceable exhaust fan and deposited to E/M store and supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. |
| 112 | S & F in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 60W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. |
| 113 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
