Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing stone rubble masonry manually/ by mechanical means in cement mortar including stacking of serviceable material and disposal of unserviceable material within all leads including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead as per direction of Engineer - in- charge. including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm (thirty centimetre) in depth, 1.5 m ( one point five metre) in width as well as 10 sqm (ten square metre) on plan) including getting out and disposal of excavated earth upto all leads and lifts for all kinds of soil including chiseling of hard rocks where blasting is prohibited including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Foundations, footings, bases for columns |
| 6 | Suspended floors, roofs, landings, balconies and access plat form |
| 7 | Columns, piers, abutments, pillars, posts and struts |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Walls (any thickness) including attachged pillasters, buttresses, plinth and string courses etc. |
| 10 | Providing and laying in position cement concrete of specified grade 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate in retaining wall, breast wall, walls of any thickness and like structures including the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level including the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying reinforced cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete,1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) in Foundation footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 15 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 16 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level mild steel and medium tensile steel bars of grade Fe-500D (Five hundred) or more including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor levels in all shapes and sizes with Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Supplying and stacking of hard stone (for stone pitching) at site including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 19 | Providing and laying factory made 60mm (Sixty millimetre) thick cement concrete paver block of M-30 ( M-Thirty) grade with approved colour, design and pattern (ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetera complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) with toughtned glass panes of 5 mm (five millimetre) thickness (weight not less than 12.50 kg/ sqm (Twelve point five zero kilogramme per square metre) of Saint Gobain including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 23 | Providing and fixing second class deodar wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) using 12 mm (Twelve millimetre) thick prelaminated board both side. Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (Twenty five to forty millimetre) thick as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 24 | Providing and fixing powder coated aluminium sheet 1mm (One millimetres) thick (Jindal make) in expansion joint vertically fixed with screws and nails complete in all floor level & in all heights including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 26 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 27 | Providing and fixing 100x10 mm (One hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 28 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 29 | Providing and fixing aluminium die cast body tubular type Universal Hydraulic Door Closer (having brand logo with ISI, IS : 3564, embossed on the body) for door weight upto 35 kg (Thirty five kilogramme) and door width upto 700 mm (Seven hundred millimetre), with necessary accessories and screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm (one hundred fifty millimetre) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Kota stone 25mm ( twenty five millimetre) thick slab (55x55cm size) flooring over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab in pattern finish with Makrana white second quality marble, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 32 | Kota stone slabs 20 mm ( twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs in pattern finish with Makrana white second quality marble, including rubbing and polishing complet upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Marble stone flooring with 18mm (Eighteen millimetre) thick Jaisalmer Yellow marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 34 | Providing and laying Vitrified Floor Tiles of size 300x300x 9.8 mm (thirty into thirty millimetre into nine point eight) or more millimeter) of 1st quality conforming to IS : 15622, of Orient bell/ Kazaria/ AGL/ Rak/ Johnson & Johnson approved make, in all colours and shades of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick Cement Mortar 1:4 (one Cement : four Coarse sand), jointing with grey cement slurry @ 3.3 (three point three)kg/ sqm including grouting the joints with white cement and matching pigments etc., complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 35 | Providing and fixing 1st quality HD series Digital Glazed rectified ceramic tiles (300mmx600 mm size) ( Three hundred into six hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell/ Kazaria/ Rak/Johnson & Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point htree kilogram per square metre) including grouting in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 36 | Providing and fixing Precoated Galvanised Iron Profile Sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 37 | Providing and fixing Ridges Plain 500 - 600mm ( five hundred to six hundred millimetre) Precoated Galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 38 | Providing and fixing Crimpt Curves Precoated Galvanised Steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 39 | Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 40 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providing and fixing M.S. holder bats clamps of approved design of CI or SCI pipes embedded in and including cement concrete blocks 10x10x10cm (Ten into ten into ten centimeters) of 1:2:4 mix ( One cement : two course sand : four graded/crushed stone aggregates 20mm (Twenty millimetres) nominal size 150mm (One hundred fifty millimetre) dia PVC pipe and cost of cutting holes and making good the wall etcetra upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing Plain bend 87.5 degree 110mm (one hundred millimetre) dia of Supreme/Fenolax/D-plast/ vectus make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 (One point five) times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cums moke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip and supplying aluminium extruded tubular galvanised / Aluminium alloy of 6005 T5 (T-Five) brackets of required sizes, sections and profiles etc. to accommodate 3 (Three) Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm (One millimetre) thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm (Two thousand five hundred square metre) from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025.1. Performance Laboratory Test for Air Leakage Test (- 50pa to - 300pa) & (+50pa to +300pa) as per ASTM E283-04 testing method for a range of testing limit 1 to 200 mVhr (One to two hundred Mechanical Ventilation with Heat Recovery)2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. (Two thousand millilitre)3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml (Two thousand millilitre)4. Structural Performance Deflection and deformation by static air pressure test (1.5 times (One point five times) design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm (Fifty millimetre)5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml (Two thousand millilitre) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providing and fixing GRC Jali (Glass Fibre Reinforced Concrete Jali) 50mm (Fifty millimetre) thick of required size, pattern, design, colour with 50% (Fifty percent) area covered and shall be made from 53 grade (Fifty three grade) white Portland cement, Quartz, Fine, Silica sand, alkali resistant glass fibre, super plasticizers and UV resistant synthetic inorganic pigments. The material casting should take place in synthetic rubber/FRP mould manufactured by RECKLI or equivalent, to be fixed on/between RCC/Block work column or structural steel work with dry fixing method complete, excluding plastering of the jams, sills and soffits including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | Structural steel work riveted, bolted or welded in built up sections, trusses, purlins, rafters, railings and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Apollo/Jai Bharat/Tata) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Steel work welded in built up sections (TATA/ SAIL/ Apollo/ JSW Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point six six to two millimetre) thick of TATA/Sail make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing mild steel tube hand rail of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 49 | Providing and fixing Float glass panes of nominal thickness 4 mm (four millimetre) make of Modiguard/ Saint Gobain/ Asahi (weight not less than 10kg/sqm (ten kilogram per square metre) of renewing glass panes with putty and nails wherever necessary including racking out the old putty complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 50 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture (ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | 15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | 20 mm (twenty millimetre) cement plaster of mix1:6 ( one cement : six sand) in pattern upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Finishing walls with 100% (Hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Zero point nine zero litre per ten square metre) (ASIAN/NEROLAC/ICI-DULUX) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMA of required shade on old work (One or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 kg/sqm (at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture New work including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing white vitreous china Vitreous China single piece water closet (Europeon type WC pan) of size 360x475x395mm (three hundred sixty into four hundred seventy five into three hundred ninety five millimetre) S-Trap 300mm (Three hundred millimetre) of Jaquar Art CNS WHT 551 with PP soft closing slim seat cover hinges, fixing accessories set and cistern fittings conforming to IS: 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and fixing CP towel rail of Jaquar (ACN-CHR-1111SM) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (Six hundred millimetre) long towel rail with total length of 645 mm (Six hundred forty five), width 78 mm (Seventy eight millimetre) and effective height of 88 mm (Eighty eight millimetre), weighing not less than 190 gms (One hundred ninety grams) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and fixing 600 mm ( six hundred millimetre) long Glass Shelf of Jaquar( ACN-CHR-1171N) supported with C.P. brass brackets and other acessories complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetra, complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing chromium plated brass soap dish (ACN 1131N) with CP brass brackets fixed to wooden cleats with CP brass screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass bib cock of Short body Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing Single Liver Sink Mixer of of Series (FUS 29163) with Swinging Spout (Wall Mounted) With Connecting Legs & Wall Flanges including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock (concealed) of Jaquar (OPP-CHR-15053 PM) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing 15mm (Fifteen millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Providing and fixing 15mm (fifteen millimetre) nominal bore brass Furrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing 15mm (fifteen millimetre) nominal bore brass Furrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing 100 mm ( one hundred milimetre ) dia Chromium Plated Grating of superior quality for floor, gully or nahani trap with hinges including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality of ESSCO (ALE-547) and make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing 75mm (seventy five millimetre) dia nominal size PVC soil, waste and vent pipes including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 110mm (one hundred ten millimetre) dia nominal size PVC soil, waste and vent pipes including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Providing and fixing 75mm (Seventy five millimetres) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. |
| 80 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. |
| 81 | Providing and fixing 100 mm (One hundred millimetre) inlet and 75 mm (Seventy five millimetre) outlet Sand cast iron S&S as per IS: 3989 trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors complete, including cost of cutting and making good the walls and floors including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal ( Hisar) / TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Providing and fixing 20mm (twenty millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal ( Hisar) / TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed, within all leads and lifts for Pipes, cables etcetera exceeding 80 mm (eighty millimetre) dia. but not exceeding 300 mm (three hundred millimetre) dia including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Providing and laying 100mm (one hundred millimetre) dia cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing stainless steel recessed type toilet paper holder of Jaquar (AHS-CHR-1551) complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing CP brass towel Ring of Jaquar (ACN-1121N) complete with CP brass wall flange fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (Five hundred eighty into three hundred eighty into three hundred fifty millimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 ltr (Five litre) PVC automatic flushing cistern. complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing nad fixing Division plate for urinals 600mmx300mm ( six hundred into three hundred millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etcetera in layers not exceeding 20cm (Twenty centimetre) in depth, consolidating each deposited layer by ramming and watering, upto all leads and lifts including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing dry cladding upto 10 metre (Ten metre) heights White sand stone with 30mm (Thirty millimetre) thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m (One metre into one metre), fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing factory made Glass Reinforced Concrete (GRC) cladding panels of approved design, texture, colour and finish, 25mm (Twenty five millimetre) thick, manufactured with alkali-resistant glass fibres, cement, and additives, having minimum 28 (Twenty eight) days compressive strength of 40N/mm2 (Forty Newtons per square millimetre) flexural strength 10N/mm2 (Ten Newtons per square millimetre), and density 2000-2200 kg/m3 (Two thousand to two thousand two hundred kilogramme per cubic metre) fixed over structural members with stainless steel (SS 304) anchor system, including drilling, epoxy resin bonding, joint filling with non-shrink grout/PU sealant, finishing, curing, scaffolding and all complete as per manufacturer’s specifications including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
