|
| 1 | Earth work in excavation by mecanical means ( Hydraulic excavation/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kind of soil |
| 2 | Surface dressing of the ground including removing vegitation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kind of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 4 | Providing and laying cement cncrete 1:2:4 (1cement 2 M.sand 4 granite chips )foundation and plinth |
| 5 | Providing and laying cement cncrete 1:4:8 (1cement 4 coarse sand : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, proping etc, and removal of form work for: Foundations, footings, bases of columns, |
| 7 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm |
| 8 | Providing and Fixing aluminium sliding door bolts, ISI marked anodised (anodised coating not less than grade AC 10 as per ISI: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete300 x 16 mm |
| 9 | Providing and Fixing aluminium tower bolts, ISI marked anodised (anodised coating not less than grade AC 10 as per ISI: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete300 x 10 mm |
| 10 | Steel work in built up tubular ( round , squre or rectangular hollow tubes etc.) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 11 | Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumin and G.I. impet washers or with G.I. impet washers filled with white lead, including a coat of approved steel primer and two coats of approved paints on over laping of sheets complete ( up to any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/sqm |
| 12 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated L or L hooks, bolts and nuts 8 mm dia G.I. impet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275gm/sqm Please Enable Macros to View BoQ information |
