|
| 1 | (B151/13.13) Repair to brick masonary in cement sand mortar 1:6. with new brick. |
| 2 | (B151/13.15) Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. |
| 3 | (B162/14.55) Dismantling old plaster or skirting ,raking out joints & cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead |
| 4 | (B150/13.4.1) Renewing glass panes, with puty and nails wherever necessary: Float glass panes of thickness 4mm. |
| 5 | (B143/12.34.2) White washing with lime to give an even shade including all scaffolding: Old work (two or more coats) including scrapping old surface and repairing with whiting wherever necessary. |
| 6 | (B144/12.35.4) Colour washing of all shades to give an even shade including all scaffolding.Old work (Two or more coats) with whiting with a base coat of white washing including scrapping old surface. |
| 7 | (B144/12.37.2.b) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Old work (one or more coats) including scrapping surface and necessary repairs.Same colour |
| 8 | (B144/12.37.1)New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 9 | (B146/12.46.2) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. |
| 10 | (B146/12.46.1) Two or more coats on new work. |
| 11 | (B139/12.3.2) Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20 mm thick. |
| 12 | (B101/9.19.3)Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung (openable) |
| 13 | (B102/9.26)Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 14 | (B102/9.27) Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 15 | (B128/11.3.1) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm thick nominal size aggregate. |
| 16 | (B-56/3.8) Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50 mm thick complete as per specification : |
| 17 | (B93/8.13.2.1) Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehyderesin in glue both sides with approved steel fittings complete as per Annexure ‘A’ :30 mm thick. Commercial Veneer both side |
| 18 | (B 66/5.8.3) Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75:Cement mortar 1:6 (1-Cement:6-coarse sand). |
| 19 | (B 65/5.2.2) Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement Mortar 1:6 (1-Cement:6-coarse sand). |
| 20 | (B72/6.17.3) Supplying and fixingin walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges:Kota stone minimum 30 mm thick |
| 21 | (B100/9.17.) Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint . |
| 22 | (B104/9.39) Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge |
| 23 | (B139/12.5) 6 mm thick cement plaster to ceiling of mix 1:3 (1cement :3-fine sand) |
| 24 | (B-109/10.21)Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with proprietary water proofing compound conforming to IS. 2645 over the RCC slab including cleaning the surface before treatment. (b) Laying cement concrete using broken bricks/brick bats 25 mm to 100mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:4 (1 cement :4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300x300xmm square (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge.With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 25 | (B86/7.12) Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tilesconfirming to IS : 13753 & IS :15622 of size 200mm x 300 mm in walls,floors, steps, pillars etc. laid on a bed of neat cement slurry finished withflush pointing in the white cement mixed with pigment to match the shadeof the tile complete (excluding the cost of cement plaster on walls andpillar). |
| 26 | (B86/7.13) Providing and fixing 1 st quality MAT finished tile size 300x300 mm confirming to IS : 13755 and IS 15622 colour such as White,grey, Ivory, Fume Red Brown , light green, light blue and other light shade in floors , steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigments to match the shade of the tile complete including the cost of cement mortar bed 1:4). |
| 27 | (B152/13.23) Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garrage doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding machine and TP etc complete |
| 28 | (B152/13.24) Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 29 | (B-145/12.41.1)Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 30 | (B-145/12.41.2)Old work (One or more coats). |
| 31 | (B44/1.8)Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 32 | (B54/3.1.6)Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand :8 graded stone aggregate 40mm nominal size). |
| 33 | (B65/5.1.2)Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 34 | (B88/7.25.1)P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600mm |
| 35 | (S217/1.2.1) P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 530x410 mm. |
| 36 | (S221/1.36.2) P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make PVC waste pipe with PVC nut 32mm complete including cutting and making good the wall :Size 510 mm x 400 mm |
| 37 | (S-240/2.38.1)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)15 mm nominal size |
| 38 | (S-240/2.38.3)25 mm nominal size |
| 39 | (S-240/2.39.1)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).15 mm nominal size |
| 40 | (S-232/2.7.3) P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. |
| 41 | (S-232/2.7.4) Long body, 15mm nominal bore weight not less than 690 gm |
| 42 | (S233/2.14.9) P & F Flush Cock/Flush Valve (IS:9758 Mark) for WC of approved quality make :Brass / Gun metal Half-turn wt. 1 Kg. of approved quality/make, 25 mm nominal bore. |
| 43 | (S233/2.15.3) P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25 mm nominal bore. |
| 44 | (S233/2.15.1)Gun-metal 15 mm nominal bore. |
| 45 | (S236/2.26.3) P & F PVC Storage Tank ISI Marked (IS : 12701)indicating the BIS license No), of approved makewith cover, 25mm dia 1M long G.I. over-flow pipe& 25 Cm. long wash out pipe with plug & socket,including making connection etc., complete ofapproved design: 500 litres capacity. |
| 46 | (S 257/3.44.1) Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes Type B for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality / make:75 mm dia |
| 47 | (S 257/3.44.2) 110 mm dia |
| 48 | (S250/3.19.1) Construction of manhole in all type of soil inner size 90 X60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thickcement concrete 1:5:10 in foundation, 20 mm thick insideplaster in CM 1:6, finished with floating neat cement, 50mmthick M-15 grade C.C. flooring, making channels, 80mmthick stone slab covering with 40mm thick M-15 grade C.C.flooring, Cement cover with frame of 450mm dia, earthworketc. complete as per design including disposal of surplusearth within 50 mtr. lead.:Depth up to 0.5 M |
| 49 | (S252/3.22.2) Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3,Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring ,earthwork complete as per approved drawing includingdisposal of earth within a lead of 50 mtr.: :Size 240 Cm. dia outside & 240 Cm. depth. |
| 50 | (S218/1.14.1) P & F Ist quality WVC Urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (small) size 456x355x265 mm. |
| 51 | (S 247/3.16.3) P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant :110 mm dia. |
| 52 | (E87/17.2.2)Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"\\"A\\"\\" attached with this BSR .1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing |
| 53 | (E7/3.1.1)Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC trunking & it's accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box , 10 A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose/holder /3 way Connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this Short point (up to 3 mtr) |
| 54 | (E7/3.1.2) Medium point (up to 6 mtr.) |
| 55 | (E7/3.1.3) Long point (up to 10 mtr..) |
| 56 | ( E8/ 3.4.2)S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 25 mm x 12 mm |
| 57 | (E9/4.1.1)Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1 x 1.5 sq.mm |
| 58 | (E9/4.1.7)2x2.5sq.mm + 1x1.5 sq mm |
| 59 | (E9/4.1.6)2x2.5 sqmm |
| 60 | (E9/4.1.11)2x4 sqmm |
| 61 | (E8/3.3.1)Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC Trunking & it's accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box, modular 10A switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On board |
| 62 | ( E33/7.36)Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 63 | (E89/17.6.1)Providing & Fixing of IP65 IK08 rated Integrated SMD Mid power LED bulk head type light fixture made from Pressure Die Cast AL housing suitable with integral driver, system lumen efficacy ≥100 lm/Watt output , THD < 10% ,p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. surge protection 4 KV. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .Minimum lumen output 1000 lm |
| 64 | (E51/10.5.1)Providing & Fixing of ISO certified company made 240/415 V porcelain kitkat fuse (/HBC type) as per PWD specification for electrical Works conforming to IS:2086,1983 on existing board/ sheet including making connections with lugs, testing etc. as required . Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .16 A ,240 V |
| 65 | (E51/10.5.3 ) 32 Amp 240 V |
| 66 | (E 30/ 7.22) P & F ISI marked 32 A D.P. switch with fuse and indicating lamp including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 67 | (E115/21.7.1)SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 0.5 HP, 1-Ø, (3 - 18)Mtr, (100-26) LPM |
| 68 | (E31/7.29.1)Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 5 step fan regulator 2 Module 360 degree rotating |
| 69 | (E81/15.7.3)Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"\\"A\\"\\" attached with this BSR .1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 70 | (R-6.3(iii)B)Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks) : Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks.Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004 Please Enable Macros to View BoQ information |
