|
| 1 | Dismantling of single layer Mangalore pattern roofing tiles. Complete all as specified and directed |
| 2 | Material and labour for roughening of surfaces of old concrete slab by wire brushing, sweeping, cleaning and washing down to remove all loose dust etc. and brushing neat cement slurry @ 3.00 kg/Square Metre on roof surface, complete all as specified. |
| 3 | Material and labour for providing 10mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed (Note: Water proofing compound shall be measured and paid separately in relevant item) |
| 4 | Material and labour for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m. blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) |
| 5 | Material and labour for roof tiles Mangalore pattern, interlocking at side joints, laid dry all as specified and directed. |
| 6 | All as per item No. 5 above but except tiles |
| 7 | Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed. |
| 8 | Dismantling/taking out existing hessian base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m & n.exc 250m. all as specified and directed |
| 9 | Surface Preparation: Removing & clean the surface free of dirt, dust, laitance etc. using wire brush, grinding machine and water jet machine and allow the surface to dry. Opening the cracks, if any, in V/U shape using electrically operated cutting machine. Cleaning the surface thoroughly from dust and loose particles using wire brush and air blower and treat it with the crack filler |
| 10 | Material and labour for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed (Note: Water proofing compound shall be measured and paid separately in relevant item) |
| 11 | Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric polyurethane based coating on terrace/Chajjas/Sunken portion of WC / Bathroom,PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 1.5MPa as per ASTM D 2370. The waterproofing membrane to be applied in 2coats @ 1.8 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including primer coat of epoxy primer @150 g/m2 and protection with 50gsm Geo-textile over the waterproofing membrane. The finished cost to include making coving at Junction, Bore Packing, treatment as per specification. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work. |
| 12 | Taking down of cement plaster from wall or ceiling surfaces of any description etc including racking out joints, hacking for key, scrubbing down with water, etc |
| 13 | Material and labour for rendering 15 mm thick in cm (1:4) on fair faces of concrete surfaces and finished even and smooth without using extra cement and mixed with water proofing compound @3% by weight of cement all as specified and directed (Note: Water proofing compound shall be measured and paid separately in relevant item) |
| 14 | Material and labour for rendering 10 mm thick in cm 1;3 on ceiling surfaces all as specified and directed |
| 15 | Material and labour for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed. |
| 16 | Material and labour for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) up to 15mm in a single coat @ 34 kg per sqm for 15mm thickness internal plaster as per manufacturer instructions complete all as directed. |
| 17 | Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 Ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 18 | Material and labour for one coat of acrylic water based interior grade primer @ 0.8 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats. |
| 19 | Material and labour for applying New Plaster wall and Ceiling Surface two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 20 | Material and labour for preparation of old surface (Plastered or unflustered) of walls and applying One coat of oil bound distemper including filling the holes, depression area with wall acre putty using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying material should be able to spray in hard to reach areas and penetration of distemper on the surface including scaffolding arrangement, trestles, ladders etc and cleaning of splashes from furniture and floors , doors/ windows up to two or three stories building complete all as specified and directed. |
| 21 | Material and labour for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 Ltrs(undiluted) /10 sq Mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed. |
| 22 | Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats including necessary scaffolding and safety measures as required complete all as specified and directed. |
| 23 | Material and labour for preparation of old surface (Plastered or unplastered) of walls and apply water proof cement based putty in holes and depression area over the plastered/old painted wall and applying One coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over acrylic water based grade primer @ 0.8 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Make should be Apex shine of Asian Paint/Anti Dust of Burger/Mica Marble of Nerolac and paint to be prepared by machines only and can be of different shades as approved including necessary scaffolding and safety measures as required complete all as specified and directed. |
| 24 | Material and labour for preparation of New surface of wall and appling two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item Nos. 15 to 24 above(a) The work pertaining to the above items shall be executed through an authorized applicator of the manufacturer of the materials proposed to be used by the contractor, such as paint, distemper, cement-based paint, putty, etc., and as approved by the Garrison Engineer.(b) The contractor shall produce the necessary applicator authorization certificate to the Garrison Engineer prior to commencement of the work. |
| 25 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 26 | Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified. |
| 27 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 28 | Material and labour for preparation of old polished wooden surface etc of any description over 10cm width or girth and applying one or more coats of French polishing complete all as specified and as directed by Engr-in-Charge. |
| 29 | Dismantling ceiling boards of any description including cover fillets, complete all as specified. |
| 30 | Supply and fix for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminum angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminum main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling complete all as specified and directed |
| 31 | Supply and fix hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed |
| 32 | Material and labour for PVC insulation panels of 10mm thickness with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing in ceiling fixed with screws on snap grid all as per manufacturer instructions. (Note for Item No 28 to 30 : (a) Contractor will produced proper drawing of complete false ceiling including DOM Area and get approved by GE before execution (b) Necessary scaffolding and safety measures will be provided before execution of work) |
| 33 | Dismantling wall lining , any thickness, including cover fillets, complete all as specified |
| 34 | Solid PVC Wall paneling including of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified. |
| 35 | 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling inclusive of fixing of wall to make PVC frame, complete and as specified. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutter from the frame ) exc 1.5 sqm but n.exc 4 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutter from the frame ) not exc 1.5 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed. |
| 38 | Material and labour for second class hard wood plain solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints all as specified and directed. |
| 39 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (Face) & (Edge), minimum comp resave strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of Engr-in-Charge (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | All as per item No. 39 above but size of chowkats 50x100mm |
| 41 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 56-60(Suspension Grade), calcium carbonate and natural fibers (wood powder /rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sink S.S screws, all as per direction of Engr-in-Charge (Note: stainless steel butt hinges and necessary S S screws shall be paid separately). |
| 42 | All as per item No. 41 above but of 35mm thick |
| 43 | Supply and fix 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified |
| 44 | Supply and fix 125 mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified |
| 45 | Supply and fix 150 size Brass handles, cast type, polished bright complete all as specified |
| 46 | Supply and fix 100 mm Butt hinges, cast brass with mild steel hinge pin, bright polished and fixed, type B-11 |
| 47 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 m thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 48 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed. |
| 49 | Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed. |
| 50 | Material and labour 4mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed. |
| 51 | Material and labour 4mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed. |
| 52 | Material and labour for toughened glass thickness 10 mm as in hinged in railing, partitions automatic doors and similar work including cutting to shape, drilling holes required. all as specified and as directed. |
| 53 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge |
| 54 | Supply and fix in repair aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000mm in width and of weight between 61 to 80 kg complete all as specified |
| 55 | Material and labour double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down un-serviceable floor spring complete all as specified |
| 56 | Supply and fix in repairs Harrison curtain rails, mild, steel, chromium plated with brackets, stops, rollers etc. complete all as specified and directed. |
| 57 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 58 | Material and labour for 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed |
| 59 | Material and labour for 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall , complete all as specified and directed |
| 60 | Supply and fix 75mm dia PVC (SWR) bend all as specified and directed |
| 61 | Material and labour for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed. |
| 63 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor etc laid over and including 15mm thick screed bed in CM 1:4 set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete. |
| 64 | Material and labour for glazed ceramic coloued tiles in vertical surfaces 300x450x7mm thick over and including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete. |
| 65 | Material and labour for Light shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 66 | Material and labour for Light shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in cement mortar 1:3 including taking down old wall dado/finishes of any description, complete all as specified and directed. |
| 67 | Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar all as specified and directed |
| 68 | Material and labour for 20 mm thick Granite (of any type) work black colour (table rubbed and polished) in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick cement mortar (1:4) all as specified and directed.(Rate including hole of cooking platform) |
| 69 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing polishing etc complete |
| 70 | Material and labour for machine cut kota stone slab as in skirting 20-25mm thick over and including 10 mm thick rendering in CM (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing polishing etc complete |
| 71 | Supply and fix in repairs bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore all as specified and as directed. |
| 72 | Supply and fix in repairs pillar taps, cast copper alloy fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore all as specified and as directed. |
| 73 | Taking up or down steel tubing and connections of 25mm bore including cleaning or removal to store all as specified and directed. |
| 74 | Taking up or down GI tubing and connections 32mm bore including cleaning or removal to store all as specified and directed. |
| 75 | Supply and fix 25 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc |
| 76 | Supply and fix 32 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc Please Enable Macros to View BoQ information |
| 77 | Supply and fix 32 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc Please Enable Macros to View BoQ information |
