|
| 1 | B/R PORTION |
| 2 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as directed. |
| 3 | Taking down roof trusses, coupled rafters or trussed beams clear span above 4 m to 8 m etc complete all as specified and as directed. |
| 4 | Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete ,brickwork ,masonry etc any section, including taking out embedded portion and making good disturbed on concrete, brick work, masonry, etc complete all as specified and as directed. |
| 5 | Dismantling timber scantlings unframed work under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc. complete all as specified. |
| 6 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling. |
| 7 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 8 | Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillers, etc but excluding ashlar facings, dressed stonework and precast concrete articles |
| 9 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar (1:6) complete as specified and directed. |
| 10 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick plaster in two layers (10mm+5mm) on brick or concrete surfaces in CM (1:4) mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately). |
| 12 | Supply only liquid water proofing compound |
| 13 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed. |
| 14 | M&L for prepartion of newly plastered surfaces of walls and applying two coats of water based acrylic distemper over a coat of 3mm thick wall care putty including primer complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of wall and applying two or more coats of acrylic smooth exterior paint of required shade for new work @ 1.67ltr/10Sqm over and including priming coat of exterior primer @ 2.20ltr/10Sqm complete all as specified and as directed. |
| 16 | S&F Mild steel framed work such as grills, gratings etc.with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 17 | S&F Prepainted galvalume aluminium zink coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as iridges, hips, valley cutters, eave board etc fixed with self tapping screws complete all as specified and as directed. |
| 19 | S&F mild steel work in tubular trusses /purlins /rafts/post etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1239 complete as specified and directed. |
| 20 | M&L Rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes , with riveted, bolted or welded attachment etc, conforming to Fe-290 Gde E-165 compete as specified and directed |
| 21 | Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n.exe 10cm long and dia of neck 11 to 15mm complete all as specified and directed. |
| 22 | M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed. |
| 23 | Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified and as directed. |
| 24 | Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified and as directed. |
| 25 | Supply and fixing of 1.25 mm thick pressed steel door frames of size 125 mm x 60 mm with one or more rebated including necessary fixing lugs, hinges, lock strike plate, etc including filling PCC M-15 (1:2:4) in hollow portion etc complete all as specified and as directed. |
| 26 | S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides complete all as specified and directed. |
| 27 | S&F 35 mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 clause 8.24(a) and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 28 | S&F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 29 | S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 30 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed. |
| 31 | S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 32 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 33 | S&F mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. |
| 34 | M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 35 | S&F Aluminium anodised doors/windows /ventilators/partitions etc with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills, etc (The design/pattern, profile size & other dimensions shall be all as directed by Engineer-in-charge at site) including aluminium handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. |
| 36 | Supply only 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 37 | M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note :- Reinforcement & formwork shall be measured and paid separately under respective items. |
| 38 | M&L formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified. |
| 39 | M&L for TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 40 | M&L for mild steel TMT bars 5mm and over upto 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed. |
| 41 | Supply and fixing anodized aluminium snap grid frame work for false ceiling, size of grid 605mm x 605mm complete all as specified & as directed. |
| 42 | M&L for 4mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete as specified and as directed. |
| 43 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 44 | M&L for Sand filling under floor or in foundation /road side berms, embankments etc as in sand cushioning including watering and consolidation complete all as specified and as directed. |
| 45 | M&L for broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 46 | M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in sub base and plinth protection and paving finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 47 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15 mm thick CM (1:6) complete all as specified and as directed. |
| 48 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 49 | M&L for non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:4) complete all as specified & as directed. |
| 50 | M&L for glazed ceramic (coloured) tiles of size 300x450x6-7mm / 450X 350X 6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing course in cement mortar (1:4) complete all as specified and as directed. |
| 51 | M&L for providing and injecting chemical emulsion for post constructional and termite treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc and finished upto delivered level in apron complete all as specified and as directed. |
| 52 | M&L for providing post constructional anti termite treatment by making hole of 12mm dia to be drilled at 300mm apart at the junction of external and internal wall with floor and construction /expansion joint , if any, ground floor only and pouring the emulsion at the rate of one litre per hole and plugging the same with white or coloured cement to match the existing surfaces complete all as specified and as directed |
| 53 | M&L for providing anti termite treatment at points of contact of wood work such as chowkats of wooden doors, window, ventilators, loft, wardrobes, etc by chemical emulsion (in oil or kerosin based solution) @ 0.5 ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc complete all as specified and as directed. |
| 54 | Supply and fixing factory made soild PVC double door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet but single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed. |
| 55 | Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part – II complete all as specified and as directed. |
| 56 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 57 | M & L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. |
| 58 | S&F 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed. |
| 59 | S&F in repairs coloured plastic water closet seat cover, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | Supply and fixing Hand Shower ABS body (Health Faucet) with 8mm dia 1.2 metre long flexible tube with wall hook complete all as specified and as directed. |
| 61 | Supply and fixing in repairs 15 mm dia Bib cock fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 62 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 63 | S & F in repairs vitreous China wash basin, white, flat back, single 550 x 400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, waste coupling, short connection pipe complete all as specified and as directed. |
| 64 | S&F in repair 15 mm bore pillar taps,fancy type cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 65 | Supply and fixing in repair 600 x 450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed |
| 66 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia,D Type 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 190 gms), complete all as specified and as directed. |
| 67 | S & F in repair brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 68 | Supply and fixing as in repairs cast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 69 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and as directed. |
| 70 | S&F in repair 15 mm two way Bib cock with flange complete all as specified and as directed Make-JAQUAR CAT No-FUS-29041 or equivalent make as specified in particular specification |
| 71 | S&F in repair corner glass shelf (with bracket) complete all as specified and as directed Make- JAQUAR CAT No CAN-1173 or equivalent as approved by GE from list of approved makes |
| 72 | S&F in repair 20mm Gun-metal, globe or gate valves, cast copper alloy screwd down high pressure with clutch handle screwed both ends for iron pipe including all fittings and fixed complete all as specified and as directed. |
| 73 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed. |
| 74 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed. |
| 75 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 76 | S&F for 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed. |
| 77 | S&F for 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed. |
| 78 | M&L for 100 mm thick providing cement concret type D-2 (1:4:8) using 40 mm graded stone aggregated for sub-base complete all as specified and as directed. |
| 79 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gery cement and no pigment including screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 80 | M&L 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 81 | S&F of 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two or three panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 82 | S&F 30 mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 83 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed. |
| 84 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Prelam colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, & fixing in opening complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed. |
| 85 | M&L for providing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as the directed.Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 86 | Supply only 4mm thick sheet glass,frosted one side ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 87 | S&F in repair 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber frame work complete all as specified and as directed |
| 88 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap (when open) 30mm complete all as specified and directed. |
| 89 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 90 | S&F 200 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 91 | S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 92 | S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 & ISI marked complete all as specified and directed. |
| 93 | S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed. |
| 94 | M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 95 | S&F in repairs mild steel 200mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. |
| 96 | S&F 140mm (overall length of cover plate), floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as directed. |
| 97 | S&F stainless steel curtain rod of 25 mm dia thickness not less than 0.75mm, including decorative stainless steel curtain holding braket and decorative stainless steel finial end cap suitable for curtain rod of 25 mm dia fixed in walls with screws with 6 Nos of curtain ring per RM complete all as specified and directed. |
| 98 | Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as directed. |
| 99 | S&F clean sawn timber of second class hardwood in scantling fixed as in purlins rafters etc complete all as specified and directed |
| 100 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 101 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed. |
| 102 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. |
| 103 | M&L for Non skid coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick (1:6) complete all as specified and as directed. |
| 104 | M&L for 18-20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including 20mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary dismantling of existing unserviceable one complete all as specified and as directed. |
| 105 | S&F 110mm bore PVC ( SWR) junction, single (Single T) equal or unequal complete all as specified and directed. |
| 106 | S&F 110mm bore PVC ( SWR) vent cowl complete all as specified and directed. |
| 107 | S&F in repair 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 108 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 109 | S&F in repair 32 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenches completed all as spd and directed. |
| 110 | S&F in repair 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenches completed all as spd and directed. |
| 111 | Dismantling wrought iron or mild steel work of any description not otherwise provided for completed all as spd and directed. |
| 112 | E/M PORTION |
| 113 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 114 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
