|
| 1 | Dismantling & removing the old damaged following item of works as per the requirement at site including scaffolding, disposing the same at specified place within all leads and lifts including supplying of all labour, T&P etc all complete as per the direction of Engineer-in-charge. (Excluding cost of GST) For all floors |
| 2 | Plaster |
| 3 | Brick work |
| 4 | graded concrete |
| 5 | flooring |
| 6 | Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour,T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) |
| 7 | 12 mm thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P,staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) |
| 8 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST) |
| 9 | Cement concrete (1:11/2 :3)) using 12mm to 20mm size C.B.G. chips for all floors,foundation & plinth etc. of approved quality mixing, hoisting,laying, compacting, scaffolding , curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors ) |
| 10 | Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures, staging and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors ) |
| 11 | foundation &plinth |
| 12 | superstructure( Roof slab, chajja, landing |
| 13 | Supply TMT rebar of minimum grade of Fe-500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). |
| 14 | Dry brick khoa rammed to 10Cm. thick using K.B. Brick, laying to proper level & slope, watering, ramming to receive A.S. Flooring including cost and supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 15 | Deployment of skilled and Un-skilled labour for attending day to day maintenance work like minor cement work & other Miscellaneous work with supply of necessary T&P etc. all complete as per direction-in-charge.(Excluding GST).But including (E.P.F & E.S.I |
| 16 | Skilled labour(Mason) |
| 17 | Unskilled labour(Helper) |
| 18 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P,staging, scaffolding, etc. complete cleaning the debrises with all taxes,including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.(Excluding GST). |
| 19 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymer having sun reflective index (SRI) of 105 on top of concrete roof in 03 coats @10.76 ltr/10sqm ,one coat of self priming of elastomeric water proofing liquid ( dilution with water) in the ratio of 3:1 and 02 coats of undiluted elastomeric water proofing liquid ( dry film thicknesss of complete application / system not less than 500 micron .The operation shall be carried out after scraping and properly cleaning the surface to remove particles with wire brushes complete in all respect as per the direction of engineer-in-charge ( Excluding GST) |
| 20 | Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST). |
| 21 | Supplying R.C.C. door /window frames of cross section 100mm X60mm of m-25 concrete using OPC-43 Grade cement and steel reinforcement of 5.5mm to 6mm dia M.S Rod with provision of hinges,locks,W.I.Clamps.etc all complete as directed by E.I.C,Excluding GST. |
| 22 | Labour charges for fitting & fixing of DOOR frame clamps with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 23 | Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators,coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge..(Excluding GST). ( For all Floors ) NB: Without painting. |
| 24 | Supplying fitting and fixing of 25mm thick WPC door shutter of 0.55 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, all lead and lift etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) , |
| 25 | Supplying, fitting & fixing of WPC door and window frames of size( 50x70mm) of 0.75 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all lead and lift complete as per direction of Engineer-in-charge (Excluding cost of GST) |
| 26 | Supplying, fitting, fixing of mosquito proof net door shutter made out of seasoned piasal wood (75mm x 32mm) size batten for style, top rail, bottom rail and lock rail by using mosquito proof net Netlon screen (20X20 square mesh) of approved quality with wooden beading, nail, inlcuding dismantling the damaged frames from its position, fixing the new frames will all aluminium fittings etc. complete including cost & supply of all materials, labour, T&P, taxes, transportation etc. as per direction of Engineer-in-charge (Excluding cost of GST) |
| 27 | Providing fitting & fixing of Mosquito net with supply of Velcro for Windows including cost of all materials, labour etc. all complete as per direction of Engineer- in charge. (Excluding cost of GST) (for Windows) with male & female rates for fixing. |
| 28 | Supplying of Carpenter & helper with T&P for attainding day-to-day maintenance work with all complete as per the direction of Engineer-in-charge (Excluding GST). But including E.P.F & E.S.I |
| 29 | Skilled labour (Carpenter). |
| 30 | Semi-Skilled (Helper). |
| 31 | Supplying, fitting, fixing of MS welded grills, fabricated with I.S.A 25 X 25 X 5mm. or 19 X 5mm. M.S flat or any suitable angles / flats etc. welded to approved design, size, fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST). |
| 32 | Distempering of approved quality and shade to old work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including cost & supply of all material labours, T&P scaffoldings, taxes etc. complete but excluding cost of GST as directed by the Engineer in charge. |
| 33 | One Coat |
| 34 | Two Coats |
| 35 | Painting one coat with approved quality & shade enamel wood paint on old wood workover one coat of primer including scraping, cleaning, the old paint surface sand papering,filling the holes with wax putty etc. all complete including cost and supply of all materials,labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 36 | Removal/cutting, uprooting of wild growth, unwanted trees etc. from wall surface, chhajjas, Parapets of residential buildings with scaffolding at any height including supply of all labour, materials, T&P etc. all complete as directed by Engineer in-charge. (Considering 12 Qtrs. as a block). (Excluding GST) |
| 37 | Providing & fixing of 32mm thick factory made paneled hard wood door,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wod as per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismantted shutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST) |
| 38 | Making lead caulked joints to C.I. Pipe and special as per specification including making lead jointing caulking, gasketing and testing the joints and supply of lead, Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge (Excluding GST). |
| 39 | 100mm dia. Lead joint |
| 40 | 150mm dia. Lead joint |
| 41 | 200mm dia. Lead joint |
| 42 | 250mm dia. Lead joint |
| 43 | 300mm dia. Lead joint |
| 44 | 450mm dia. Lead joint |
| 45 | Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling with labour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 46 | Cleaning of O.H tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST) |
| 47 | Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST) |
| 48 | Porcelain hand wash basin (16\\" x 22\\") |
| 49 | 15mm dia C.P Pillarcock (Plaza/Amber) |
| 50 | 32 mm CP waste |
| 51 | 40/50 mm steel sink waste |
| 52 | 32mm PVC Waste pipe |
| 53 | 15mm Connection pipe (PVC/CP) Water take |
| 54 | Steel Kitchen Sink (24''x18''x10'') (Hindware/Parryware/Johnson) |
| 55 | 5mm thick bevelleged plate glass mirror 24\\" x 18\\" size with masonite board and mirror screw. |
| 56 | 10 ltr capacity PVC low level cistern (Slimline) |
| 57 | CP Soap Holder |
| 58 | CP shower (over head) |
| 59 | 20mm dia 60cm long towel rail |
| 60 | CP self ( 20\\"x 5\\") |
| 61 | 150mm/100 mm dia C.I/CP. Grattings |
| 62 | 15mm dia C.P stopcock(Amber/Plaza) |
| 63 | 15mm CP Bibcock (Plaza / Amber). |
| 64 | 15 mm dia Symet bibcock (Prayag)) |
| 65 | 15mm dia PVC pillar cock (Prayag) |
| 66 | 15mm dia PVC Angle cock (Watertec ) |
| 67 | Cistern washer black 5mm thick |
| 68 | PVC washer 20mm /15mm |
| 69 | Long Flush bend for Cistern |
| 70 | White cement |
| 71 | M-seal |
| 72 | Nut & bolt with washer different sizes |
| 73 | Hacksaw blade |
| 74 | Brass spindle for bibcock/pillarcock/stopcock |
| 75 | Porcelain 23\\" IWC ( Orissa Pan) |
| 76 | Commode (s-trap) EWC/AWC with cover |
| 77 | commode sheet cover and clamp (Parryware) |
| 78 | 15mm to 50 mm MS Clamp |
| 79 | 4000 ltrs capacity (PVC-3 core white colour Sintex Make) |
| 80 | 2000 ltrs capacity (PVC-3 core white colour Sintex Make) |
| 81 | 1000 ltrs Capacity (PVC-3 core white colour Sintex Make) |
| 82 | Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 83 | 15mm Dia. G.I pipe (TATA/JINDAL) |
| 84 | 20mm Dia. G.I pipe (TATA/JINDAL) |
| 85 | 25mm Dia. G.I pipe (TATA/JINDAL) |
| 86 | 40mm Dia. G.I pipe (TATA/JINDAL) |
| 87 | 50mm Dia. G.I pipe (TATA/JINDAL) |
| 88 | 15mm UPVC Pipe (Supreme/Oriplast) |
| 89 | 20mm UPVC Pipe(Supreme/Oriplast) |
| 90 | 25mm UPVC Pipe(Supreme/Oriplast) |
| 91 | 40mm UPVC Pipe(Supreme/Oriplast) |
| 92 | 50mm UPVC Pipe(Supreme/Oriplast) |
| 93 | Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) |
| 94 | 20mm Dia. U-PVC union |
| 95 | 50mm Dia. U-PVC union |
| 96 | 20mm Dia U-PVC elbow |
| 97 | 50mm Dia. U-PVC elbow |
| 98 | 20mm Dia. U-PVC tee |
| 99 | 50mm Dia. U-PVC tee |
| 100 | 20mm Dia. U-PVCsocket |
| 101 | 50mm Dia. U-PVC socket |
| 102 | 20mm dia U-PVC MTA ( Brass Threaded) |
| 103 | 50mm Dia. U-PVC MTA( Brass Threaded) |
| 104 | 20mm dia U-PVC FTA( Brass Threaded) |
| 105 | 50mm Dia. U-PVC FTA( Brass Threaded) |
| 106 | 20mm dia PVC Ball Valve |
| 107 | 50mm dia PVC Ball Valve |
| 108 | U-PVC 20 x 15 mm dia brass elbow |
| 109 | 20mm dia UPVC Brass elbow |
| 110 | 20mm dia UPVC (coupler) |
| 111 | 50mm dia UPVC (coupler) |
| 112 | U-PVC Paste |
| 113 | Thread tape |
| 114 | 20mm dia UPVC Clamp |
| 115 | 50mm dia UPVC Clamp |
| 116 | Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 117 | 20mm dia G.I socket |
| 118 | 50mm Dia. G.I socket |
| 119 | 50 mm Dia. G.I union |
| 120 | 20mm dia G.I union |
| 121 | 20mm dia G.I elbow |
| 122 | 50mm Dia G.I elbow |
| 123 | 20mm dia. G.I tee |
| 124 | 50mm Dia. G.I tee |
| 125 | 20mm Dia. G.I S.P. ( 2\\",3\\",4\\",6\\" long) |
| 126 | 15mm Dia. G.I S.P. ( 2\\",3\\",4\\",6\\" long) |
| 127 | 25mm Dia. G.I S.P. ( 2\\",3\\",4\\",6\\" long) |
| 128 | 40mm Dia. G.I S.P. 300mm length long thread |
| 129 | 50mm Dia. G.I S.P. 300MM length |
| 130 | 20mm dia G.I Plug |
| 131 | 50mm Dia. G.I Plug |
| 132 | 35 x 3mm M.S. Screw |
| 133 | 110mm PVC Pipe |
| 134 | 75mm PVC pipe |
| 135 | 110mm PVC P trap |
| 136 | 110mm PVC Clamp |
| 137 | Bamboo |
| 138 | Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 139 | Man holes |
| 140 | Inspection Chamber |
| 141 | Gresase Chamber. |
| 142 | Small size Septic tank. |
| 143 | Big size Septic Tank. |
| 144 | Labour charges for dismantaling of IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 145 | Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 146 | Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST) |
| 147 | Laying of 15mm to 25mm. Dia pipe. |
| 148 | Laying of 40mm to 50mm. Dia pipe. |
| 149 | Engagement of Hydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST) |
| 150 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. |
| 151 | Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. |
| 152 | Engagement of Tractor for shifting of sludge, debris from one place to other etc. with fuel, engagement hire & running charges, cost of operator, etc. all complete as per direction of Engineer-in-charge only engagement perod will considered, no idle charge will be considered (Excluding GST). Please Enable Macros to View BoQ information |
