|
| 1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 2 | Frame size 65 x 100 mm |
| 3 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 4 | 35 mm thick |
| 5 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 6 | 250x16 mm |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 8 | 125 mm |
| 9 | 100 mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 11 | 200x10 mm |
| 12 | 150x10 mm |
| 13 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 14 | 10 litre capacity - White |
| 15 | Providing and fixing brass bib cock of approved quality : |
| 16 | 15 mm nominal bore |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 18 | Semi rigid pipe |
| 19 | 32 mm dia |
| 20 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 21 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 22 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : |
| 23 | Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 |
| 24 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 25 | Old work (one or more coats) |
| 26 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 27 | Of area 3 sq. metres and below |
| 28 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 29 | Providing, supplying, installing, testing and commissioning of 1 HP centrifugal monoblock motor pump of make Kirloskar or equivalent approved, suitable for water supply / pumping application, complete with TEFC induction motor, copper wound, single phase, 230 V, 50 Hz AC supply, including base plate, necessary foundation bolts, electrical connections, earthing, testing and making the pump fully operational, complete as directed by the Engineer-in-Charge. |
| 30 | Providing, supplying, installing, testing and commissioning of electric instant type water heater (geyser) of 5 litre capacity, suitable for guest house /toilet use, ISI marked, complete with copper / Incoloy heating element, adjustable thermostat, automatic thermal cut-out, pressure relief safety valve, rust-proof outer body, suitable for operation on 230 V, 50 Hz, single phase AC supply, including wall mounting arrangement, electrical connections, earthing, testing and making the unit fully operational, complete as directed by the Engineer-in-Charge. |
| 31 | Supplying and replacing old unserviceable 15/16 ampere, 3-pin power plug and socket, ISI marked, suitable for operation on 230 V, single phase, 50 Hz AC supply, complete with necessary connections, fixing, testing and making the point functional, excluding wiring, complete as directed by the Engineer-in-Charge. |
| 32 | Supplying and replacing old unserviceable 5/6 ampere piano type switch with matching socket, ISI marked, suitable for operation on 230 V, single phase, 50 Hz AC supply, complete with necessary connections, fixing, testing and making the point functional, excluding wiring, complete as directed by the Engineer-in-Charge. |
| 33 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Please Enable Macros to View BoQ information |
