|
| 1 | Dismantling water tanks exc 500 and not exc 1000 ltrs capacity and removing to store complete all as specified and directed. |
| 2 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 3 | S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 4 | S & F in repair 20mm bore gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 5 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 6 | Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 7 | Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 8 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 9 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 10 | Removing existing water proofing/black top treatment including concrete padding, plastering roughening of concrete surfaces, cleaning and washing down the surfaces with water and removing debris/rubbish materials outside MOD land complete all as specified and directed. |
| 11 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and fair without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed. Notes : WPC shall be measured and paid separately. |
| 12 | M&L for 3mm thick APP modified prefabricated membrane weight not less than 3.0 Kg/Sqm water proof membrane reinforced with non-woven polyster (wt. not less than 150 gms/sqm) land on primed surface by forced water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as specified and directed. |
| 13 | M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete all as specified and directed. |
| 14 | M&L for Cement concrete chequered tiles 300x300x25mm thick set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and polished set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15 mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 15 | M&L in repair, for 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 16 | M&L in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 17 | M&L in repair, for 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 18 | M&L in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 19 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 20 | S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.. |
| 21 | S&F in repair PVC (SWR) Bend radius any radius 75mm bore complete all as specified and directed. |
| 22 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 23 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed. |
| 24 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 25 | Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 26 | M&L 15 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall complete all as specified and directed |
| 27 | M&L 15 mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement with using WPC 3% by weight of cement on wall complete all as specified and directed. |
| 28 | M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces without using extra cement on ceiling complete all as specified and directed. |
| 29 | Supply only water proofing compound complete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces of wall and applying 1.5mm thick Birla or equivalent wall putty and applying two coats of oil bound distemper over a coat of alkhali resistant priming paint complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment of wall surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 32 | M&L for preparation of old ceiling surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 33 | M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 34 | M&L complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of Weather proof Exterior Emulsion paint complete all as specified and directed. |
| 35 | M&L preparation of newly plastered surfaces of wall and applying two coats of Weather proof Exterior Emulsion paint over a coat of suitable primer on walls complete all as specified and directed. |
| 36 | M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 37 | M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified and directed. |
| 39 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 40 | Demolition of unreinforced cement concrete in ground flooring and paving not exc. 15 cm thickness below or above ground level complete all as specified and directed. |
| 41 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 42 | M&L for Vitrified tiles coloured light shade 8-10 mm thick area of each tiles not exc 0.36 Sqm, in floors laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 43 | M&L for Vitrified tiles coloured light shade 8-10 mm thick area of each tiles not exc 0.36 Sqm, in skriting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 44 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7-8 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 45 | M & L for colour glazed ceramic wall tiles of size 450x300x6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall. cement screed bet set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 46 | M&L for Granite (of any type) tiles 15-18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed.. |
| 47 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding complete all as specified and directed. |
| 48 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection, laid in panels, bituminium filling in gaps finished the top surfaces even and fair without using extra cement complete all as specified and directed. |
| 49 | Taking down chowkhat or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 50 | Taking down chowkhat or frame with shutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed. |
| 51 | Taking down shutter of any description exc 1.00 sqm each but n.exc 2.00 Sqm complete all as specified and directed. |
| 52 | M&L 1.25 mm thick pressed steel frame of size 105X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed |
| 53 | M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and as directed. |
| 54 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed. |
| 55 | M&L factory made uPVC powered coated colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including plain glass 5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.36 mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter, complete all as specified and directed. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.. |
| 56 | M&L fabricated powder coated anodized aluminium grill of size 75x75 mm, using 6mm dia bars fixed to outer portion of chowkhat using U/V section runners complete all as specified and directed |
| 57 | M&L Solid PVC double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawings complete all as specified and directed. |
| 58 | M&L Factory made Solid PVC Moulded Door Shutters with particle board core 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.. |
| 59 | M&L Factory made solid panel wood grain printed PVC wire gauzed door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 60 | M&L factory made 35mm thick flush shutter solid core construction with block board core and plywood face panel commercial type on both faces complete all as specified and directed. |
| 61 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed |
| 62 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawings complete all as specified and directed. |
| 63 | M&L factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 64 | S & F 100 mm Butt hinges, medium weight cold rolled, steel and fixed complete all as specified and directed |
| 65 | S&F 100mm long butt hinges, extruded aluminium alloy with galvanised steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 66 | S&F 200mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 67 | S&F 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 68 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed . |
| 69 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 70 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 71 | M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 72 | S&F in repair, 300mm , steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 73 | S & F 75 mm Butt hinges, medium weight cold rolled, steel and fixed complete all as specified and directed. |
| 74 | S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, curtain rods to fixed to walls complete all as specified and directed. |
| 75 | S&F in Stainless steel 304 grade clamps with ends/stops etc including other accessories for fixing arrangements of 25 mm dia curtain rod to wall ,complete all as specified and directed. |
| 76 | S&F in Stainless steel 304 grade ornamental knobs for side of curtain rods including fixing arrangements complete all as specified and directed. |
| 77 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified and directed. |
| 78 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 2mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 79 | S&F in repair, 600 mm x 450 mm size bevelled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 80 | S & F in repair PVC bathroom cabinet mirror of size 550mmX400mm, with openable shutter fixed with looking mirror, selected quality glass, with suitable shelves inside the cabinet of superior quality and fixed to wooden plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 81 | S&F in repair, sheet glass shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and directed |
| 82 | S&F in repair, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 83 | S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 84 | S&F in repair, brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed. |
| 85 | S&F in repair, 20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 86 | S&F in repair 20 cm dia square towel ring, brass, chromium plated,, fancy type fixed to wall with raw plugs and chromium plated screws complete all as specified and directed. |
| 87 | S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter long pvc tube cover CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 88 | S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 89 | S&F in repair, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 90 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 91 | S&F in repair, 15 mm bore chromium plated fancy type Kitchen swan neck bib taps with flange, screwed down high pressure complete all as specified and directed. |
| 92 | S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 93 | S&F in repair fancy type central hole basin mixer without PUW with 450 mm flexible hose copper alloy with capstan heads CP screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and as directed. |
| 94 | S&F in repair 15mm dia cast copper alloy chromium plated fancy type wall mixture with with crutch and adjustable wall hook copper alloy with capstan heads C.P screwed down high pressure with or without without lettered hot or cold with screwed shanks and fly nuts screwed for iron and fixed complete all as specified and directed. |
| 95 | S&F in repair, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 96 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed. |
| 97 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed. |
| 98 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 99 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 100 | S&F in repair, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 101 | S&F in repair, Steel plate rack made of 0.70 mm thick stainless sheet of overall size 900x 900x 260mm with providing necessary partition shelves & hanging arrangement etc as per manufacturer trade pattern and fixed to wall with raw plug with brass chromium plated screws complete all as specified and directed. |
| 102 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 103 | M&L framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, flat iron, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 104 | M&L TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, welding where necessary, bending spirally for hooping for columns, hooking ends and binding with and including steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 105 | M&L TMT bar 6 to 8 mm, cut to length, bent to shape required, including cranking, welding where necessary, bending spirally for hooping for columns, hooking ends and binding with and including steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 106 | M&L Formwork to soffit of suspended slab such as roof slab, floor slab, shleves landing, fascia and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 107 | M&L for use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but not exc. 20 cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 108 | M&L powder coated anodized aluminium frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 109 | M&L powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 110 | M&L for 5 mm thick sheet glass ordinary quality and glazing each pane fixed with neopune rubber gasket in aluminium frame work complete all as specified and directed. |
| 111 | M&L 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopune rubber gasket in aluminium frame complete all as specified and directed. |
| 112 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and directed. |
| 113 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. |
| 114 | M & L PVC 18-19 mm thick decorative lamination board of density 600kg/cbm manufactured by an ISO:9001-2005 certified with termite proof, water proof & flame retardant PVC Sheet. complete fixed with each other using solvent cement adhesive and stainless steel screws etc. panels shall be fabricated using adhesive and screws and all the edges shall be covered with bonding tape and finished as per make and specification and drawing complete all as specified and directed. |
| 115 | S&F Auto soft closed hinge for PVC laminated board complete all as specified and directed. |
| 116 | S&F 75 mm hasp & staple, safety type, aluminium anodised with steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 117 | S&F perforated Cutlary Drawer Length is 500-550 mm, Depth- exc 490 mm , Height -90 mm made of stainless steel of Grade IS:202. incl nec fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational complete all as specified and directed. |
| 118 | S&F Plain basket Drawer Length is 500-550 mm, Depth- exc 500 mm , Height -100 mm made of stainless steel of Grade IS:202. ( allowable tolerance limit 20mm dimension ) incl necc fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational complete all as specified and directed. |
| 119 | S&F Cup and saucer basket Length is 500-550 mm, Depth- exc 500 mm , Height -100 mm made of stainless steel of Grade IS:202. ( allowable tolerance limit 20mm dimension ) incl necc fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational complete all as specified and directed. |
| 120 | S&F Thali basket Drawer Length is 500-550 mm, Depth- exc 500 mm , Height -200 mm made of stainless steel of Grade IS:202. ( allowable tolerance limit 20mm dimension ) incl necc fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational complete all as specified and directed. |
| 121 | S&F D-tray dia of tray 750 mm dia made of stainless steel of Grade IS:202. ( allowable tolerance limit 20mm dimension ) incl neck fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational complete all as specified and directed. |
| 122 | S & F 125mm long stainless steel mirror finish modular kitchen cabinet handle complete all as specified and directed. |
| 123 | S & F 150mm long stainless steel mirror finish modular kitchen cabinet handle complete all as specified and directed. |
| 124 | M&L for applying anti corrosive treatment : anticorrosive treatment to reinforcement by applying zinc rich epoxy based protective coating with Zinc Rich Epoxy coating like Nitozinc Primer std of Fosroc or equivalent on the dry surface of the rebars (existing and additional rebars if provided) (Mode of measurement - per Kg of Material consumed). Application of the products shall be by manufacturer's authorized applicator and as per manufacturer's specifications complete all as specified and directed. |
| 125 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified and directed. |
| 126 | M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement complete all as specified and directed for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 127 | All as per ser item No. 126 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 128 | All as per ser item No. 126 here in before, but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 129 | All as per ser item No. 126 here in before, but one light point controlled by 2 way switches complete all as specified and directed. |
| 130 | All as per ser item No. 126 here in before, but one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed. |
| 131 | All as per ser item No. 126 here in before, but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed. |
| 132 | S&F in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified and directed. |
| 133 | S&F in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 134 | S&F in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 135 | S&F in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed. |
| 136 | S&F bell push, flush type, 5 Amp single pole, 230 volts white finish complete all as specified and directed. |
| 137 | S&F switch piano flush button 5 Amp single pole 2 way 230 volts white finish complete all as specified and directed. |
| 138 | S&F in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement complete all as specified and directed. |
| 139 | S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 140 | S&F electric water heater, storage type steel body with MS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with hot and cold PVC pipe and Plug top complete with all accessories such as safety valve, thermostate, NRV, connection piece hot and cold PVC pipe, Plug top etc complete all as specified and directed. |
| 141 | S&F in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete as per site requirement complete all as specified and directed. |
| 142 | S&F LED light fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 143 | S&F in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt complete all as specified and directed. |
| 144 | S&F in replacement stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 145 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed. |
| 146 | S&F in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 2x 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Four runs of cables and two run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black yellow and Green. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 147 | S&F distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways complete all as specified and directed. |
| 148 | S&F in replacement of MCB TPN 63 Amps, 415 Volts, 50 Hz with 10 KA 'C' curve complete with connection testing and commissioning complete all as specified and directed. |
| 149 | S&F sheet metal enclosure with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and directed. |
| 150 | S&F in replacement MCB SPN/DP 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and directed. |
| 151 | S&F in replacement MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and directed. |
| 152 | Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board complete all as specified and directed and testing on completion. |
| 153 | S&F KAFF PRISMA DHC 60 Kitchen chimney, hassle free filter less dry heat auto clean Technology, black, low maintenance hassle free filter less and dry heat clean Technology, Thermostatic Touch Control Panel with 3 speed gesture motion, matt black finish, black metal oil collector, motor with copper winding black glass clad hood with LED insignia, front panel with black glass, Energy saving LED light Metal Blower + Metal Housing, Designed Air flow (Max) 1250 Nm3/h, Noise Level : 62 dBA (Max) Size 60 Cm complete all as specified and directed. |
| 154 | S&F sheet metal enclosure (Factory made), VTPN Vertical Distribution Boards IP -43& IP-44 protection with MCCB's 160A as incomer, Double door, 4 way NO of modules I/C XTI 160, O/G 12 nos with 250 Amps rated copper bus bar Model NO I-VTPN 04 WAY XTI/IC MD DB Product code 1SYM071604C0001 complete all as specified and directed. |
| 155 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
