|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 2 | Dry stone pitching, 225mm thick, including cost of stones and preparation of surface. Nallah stone. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting , propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and centilevers. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth or above level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. :1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding an bolted with special shaped washers etc. complete.Hot finished seamless type tubes |
| 11 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a rpiming coat of approved steel primer all complete. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 13 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 14 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 15 | Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in charge. |
| 16 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:6 (1 cement:6 coarse sand) & Extra for Brick work in super structure above plinth level: upto floor V level. (By manual means) |
| 17 | Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto floor v level. (code 6.15.2 & 6.16 merged) Cement mortar 1:4 (1 cement:4 coarse sand) |
| 18 | Cement plaster in coarse sand .12mm cement plaster of mix 1:6 (1 cement :6 coarse sand) |
| 19 | Cement plaster in coarse sand 15mm cement plaster on the rough side of single or half brick wall of mix 1: 4(1 cement :6 coarse sand) |
| 20 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 21 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 22 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 23 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 24 | Wiring for light point/ fan point/ Exhaust fan point/ call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required, Group C Make: Havells/L&T/Polycab/ Finolex/KEI. Conduit-Plaza/Ajanta Plast |
| 25 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way , Double door Make: L&T/ABB/ Schneider /Havells/ any reputed make |
| 26 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch. Make: Crabtee/Legrand/ North West/Anchor/Havells |
| 27 | Supplying and fixing following Modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outletMake: Crabtee/Legrand/ North West/Anchor/Havelles |
| 28 | Supplying and fixing following size modules, GI box along with modular base and cover plate for modular switches in recess etc. 6 module (200 mmX 75 mm) |
| 29 | Supplying and fixing following Modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch Make: Crabtee/Legrand/ North West/Anchor/Havelles |
| 30 | Supplying and fixing following Modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet Make: Crabtee/Legrand/ North West/Anchor/Havells/ Any reputed make |
| 31 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 20 Amp. Make: L&T/ABB/ Schneider /Havells |
| 32 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 10 Amp. Make: L&T/ABB/ Schneider /Havells/ any reputed make |
| 33 | Supplying and fixing Following rating, double pole,240 V, isolator in existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole/ Isolator 63 Amp. Make: L&T/ABB/ Schneider /Havells/ Any reputed ISI make |
| 34 | Installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting/LED tube fittings of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. LED tube light fitting 4 Feet . |
| 35 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire. Make: Havells/L&T/Polycab/ Finolex/KEI. Conduit-Plaza/Ajanta Plast/ Any reputed make |
| 36 | Wiring for light /power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit alongwith 1 No.4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make: Havells/L&T/Polycab/ Finolex/KEI. Conduit-Plaza/Ajanta Plast/ Any reputed make |
| 37 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box including connections as required |
| 38 | Installation of Exhaust fan in the existing opening including making good the damage, connection, testing and commissioning etc. as required. upto 450 mm |
| 39 | Extra for fixing louvers/ shutters complete with frame for a exhaust fan of all sizes |
| 40 | Earthing with GI earth npipe 4.5 Mtr. Long 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe with charcoal/ coke, salt as required |
| 41 | Supplying of 450 mm Ventilating/Exhaust Fan Metalic Body Make: Bajaj/Usha/Havells Any reputed |
| 42 | Supplying LED tube light fitting 4 feet, 18 watt ,Make: Bajaj/Usha/Havells Any reputed / Any reputed ISI make |
| 43 | Supplying Installation and commissioning includes mounting of lights on roof hooks/fixture and making electrical connections to make the light functional. Wiring is not in scope.ELECTRIC HIGHBAY LIGHT 100W. Make: orient/Bajaj/Surya/Any reputed make . Please Enable Macros to View BoQ information |
