Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation, trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 4 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 5 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 6 | Providing designation 75Bwork in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Providing designation 75B work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints of screening materials, scaffolding, ranking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I. |
| 10 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 19 | All works upto plinth level-Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 20 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 22 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level-Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 23 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantileversLINTEL BAND - SHUTTERING |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Weather shade, Chajjas, corbels etc., including edges |
| 32 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 33 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 34 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 35 | S/F 35mm thick solid core type non-decorative double leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial vennered of statdard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand direction of E/I. |
| 36 | Providing Tor steel reinforcement of 8mm dia to 32mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 37 | 8# dia bar @ 25% |
| 38 | 10# dia bar @ 25% |
| 39 | 12#-25# dia bar @ 50% |
| 40 | S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.) |
| 41 | Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I. |
| 42 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 43 | S/F local make fully glazed steel door, windows or ventilation of standard rolled 'Z' and mullion steel section and size as per IS - 38 joints met welded with 100 x 16 x 3mm M.S. lug fixed in cement concrete (1:2:4) blocks, 15 x 10 x 10cm size including cost of oxidized iron fitting with hinges, handle per step catch springs, 3mm thick plain glass panes with aluminum beads and inner frame fixed with lugs with 20mm long 6.3mm GI. counter sunk machine screw and nuts and applying a coat red lead paint carriage to work site hoisting and plcing in all position in all storys and taxes all complete as per building specification and direction of E/I. |
| 44 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 45 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 46 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 47 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 48 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With \\"A\\" grade white 15X15cm Tiles. |
| 49 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With commercial grade white 15X15cm Tiles. |
| 50 | Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 x 10 mm sizes. |
| 51 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 52 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 53 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 54 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 55 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 56 | Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 57 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 58 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 59 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 60 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 61 | Providing two coat of snowcem shade and make over a coat of cement of primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I. |
| 62 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 63 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 64 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 65 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 66 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central crosspiece |
| 67 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineerin-charge:Profile B- Fixing with adjustable lugs with split end tail to each jamb |
| 68 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 69 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 70 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 45 x 70 mm |
| 71 | Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5mmthick |
| 72 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 73 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 74 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 75 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) Powder coated aluminium (minimum thickness of powder coating 50 micron |
| 76 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 77 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete |
| 78 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 79 | Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible |
| 80 | Covering of treated surface with PCC:- Providing 25mm thick Cement concrete M-20 (1:1.5:3) maintaing slope in alternate 2 Mtr. X 2Mtr. Panels with approved quality of stone chips of 20mm to 6mm Size graded and cleaned sand of F.M. 2.5 to 3 including screening................E/I. |
| 81 | Providing and filling of 6 mm thickGroove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as per drawings and technical specifications and direction of E in Charge.(with 18% |
| 82 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : |
| 83 | (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 84 | (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 85 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 86 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 87 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 88 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 89 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 90 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 91 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 92 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :'25 mm thick |
| 93 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 94 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 95 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 96 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 97 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into thesand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, allcomplete as per manufacturer's specifications & direction of Engineerin-Charge.80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 98 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 99 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 100 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 101 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 102 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 103 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \\"T\\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T'. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. |
| 104 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
| 105 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) |
| 106 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 107 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 108 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 109 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 110 | Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 111 | a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart) |
| 112 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, byspreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 113 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
| 114 | Supplying and stacking at site dump manure from approved source, including carriage up to 1km (manure measured in stacks will be reduced by 8% for payment) |
| 115 | Fine dressing of the ground |
| 116 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and/or good earth to be paid seprately |
| 117 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 118 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to150 mm measured |
| 119 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per directionof the officer in charge |
| 120 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)TREE Plants |
| 121 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush greenfoliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 122 | Providing and displaying of Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 123 | Providing and Displaying plants Allyssum white in full bloom well developed Fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per directionof the officer-in-charge. |
| 124 | Providing and Displaying plants Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. |
| 125 | Providing and Displaying plants Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 126 | Providing and Displaying plants Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of theofficer-in-charge. |
| 127 | Providing and Displaying plants Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 128 | Providing and Displaying plants Missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 129 | Providing and Displaying plants Nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.. |
| 130 | Providing and Displaying plants Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 131 | Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 132 | Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per directionof the officer-in-charge.. |
| 133 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction ofthe officer-in-charge. |
| 134 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in20 cm Earthen Pot, as per direction of the officer-in-charge. |
| 135 | Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of theofficer-in-charge. |
| 136 | Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I.150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L. |
| 137 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge100 mm nominal size dia |
| 138 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge |
| 139 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge |
| 140 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge |
| 141 | DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates)Drilling upto 30 mtr. Depth below G.L. in Rural Area |
| 142 | Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. |
| 143 | (a) From 0.00 M to 50.00 M below G.L. |
| 144 | (b) From 51.0 M to125.00 M |
| 145 | (c) From126.0 M to150.00 M |
| 146 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 147 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 148 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 149 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 150 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages(2 HP) |
| 151 | FR PVC insulated 3 core 4 sq.mm copper wire |
| 152 | Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I. |
| 153 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. |
| 154 | Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) |
| 155 | Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) |
| 156 | CARRIAGE OF MATERIALS |
| 157 | Bricks Lead = 1 k+7 P(8km) |
| 158 | Sand lead = 10 km |
| 159 | Stone chips lead = 22 km |
| 160 | Stone metal lead = 22 km |
| 161 | Local Sand lead = 3km |
| 162 | Fly Ash Brick - 15km |
| 163 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I. |
| 164 | Providing & fixing 15mm size pillar cock C.I. body brass spindle pillar cock of approved quality as per specification & direction of E/I. |
| 165 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.15 mm dia |
| 166 | Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. |
| 167 | Horizontal - 25 mm dia |
| 168 | Horizontal - 32 mm dia |
| 169 | Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I. |
| 170 | (a) 125 mm thick wall |
| 171 | (b) 250 mm thick wall |
| 172 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 173 | (b) Mirror (300 x 450mm) |
| 174 | (c) C.P. brass tower rail |
| 175 | (d) C.P. brass soap container medium quality with screw and hinges etc. |
| 176 | Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long - With 10.0 lit. low level PVC cistern |
| 177 | Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.With 'P' trap - 12.5 lit low level PVC Cistern |
| 178 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan \\"Parry\\" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.(a)Flat back or Standing Cornar |
| 179 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 180 | Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.150mm dia |
| 181 | Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark) |
| 182 | Angular Stopcock |
| 183 | Telephonic shower flexible pipe |
| 184 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 185 | 75 mm diameter |
| 186 | 110 mm diameter |
| 187 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 188 | Coupler - 110mm |
| 189 | Single tee without door - 75x75x75 mm |
| 190 | Single tee without door - 110x110x110 mm |
| 191 | 75 mm bend |
| 192 | 76 mm bend |
| 193 | Shoe - 110 |
| 194 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete |
| 195 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 196 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 197 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 198 | 25mm dia. |
| 199 | 25 mm nominal outer dia Pipes |
| 200 | 32 mm nominal outer dia Pipes |
| 201 | 80 mm dia |
| 202 | 100 mm dia |
| 203 | 150 mm dia |
| 204 | 200 mm dia |
| 205 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. |
| 206 | 15 mm nominal outer dia Pipes |
| 207 | 20 mm nominal outer dia Pipes |
| 208 | Providing and fixing swinging type CI Non Return Valve with flap and SS hinges complete including matching flanges, nuts & bolts conforming to IS:5312 |
| 209 | 150mm dia. |
| 210 | 100mm dia. |
| 211 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PM 1.6 with non rising spindle, bronze/gun metalseat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to is /du of following sizes as required:150mm dia. |
| 212 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304,sheet with 3 mm dia holes with stainless steel flange.150mm dia. |
| 213 | Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 214 | 150mm dia. |
| 215 | 100mm dia |
| 216 | 80mm dia |
| 217 | Providing and fixing GM oblique type Hydrant Valve with 63 mm outlet/inlet GM instantaneous female coupling with rubber cap and chain conforming to IS:5290 including matching flange, gasket, nuts & bolts complete.Make : Kartar/Newage/Arihanta) Single Headed Gun metal |
| 218 | Providing and fixing 63 mm dia rubberized rubber line hose pipe in 15 mtr length conforming to IS:636 type A ISI marked with gun metal male and female instantaneous coupling conforming to IS:903 wounded with 18 SWG copper wire complete.Make : Kartar/Newage/Arihant |
| 219 | Providing and fixing SS branch pipe with 20 mm nozzle conforming to IS:903 complete.Make : Kartar/Newage/Arihant |
| 220 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: |
| 221 | Supplying and fixing Air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 222 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 223 | Supplying, fixing, testing & commissioning Of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required |
| 224 | Providing & fixing of pressure switch in MS, pipe line including connection etc. as required. |
| 225 | Supply, erection, testing & commissioning of electrical motor driven main pump of horizontal In Line Type end suction pump capable to deliver 2850LPM against head of 60M (to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost Hydrant) . Fire pump shall have C.I. casing, bronze impeller (hard finished and dynamically balanced) and S.S. (304) Shaft with mechanical seal. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority). (HYDRANT PUMP) |
| 226 | (A) Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)(B) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.(C) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding. residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of faultwith audio indications, painted with post office red colour etc. as required.DIESEL PUMP 2850 Ipm at 56 m Head |
| 227 | (A) Supplying, installation, testing and commissioning of electric drivenpressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Jockey Pump)(B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming toIS: 1520.(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS: 325.(D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(E) Suitable cement concrete foundation duly plastered and with anti vibration nadeJOCKEY PUMP 180 Ipm at 56 m Head |
| 228 | Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42 with 400 Amp aluminium bus bar as required. |
| 229 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 230 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 231 | Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. |
| 232 | Group a |
| 233 | Group C |
| 234 | Twin Control Point Wiring in PVC Conduit, with Modular type Switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required. |
| 235 | Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required. |
| 236 | Supplying and fixing batten/ angle holder including connection etc. as required. |
| 237 | 9/10 Watt LED Bulb |
| 238 | Supply fitting fixing of Bulk head fitting with 9/10 watt CFL/LED |
| 239 | S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-5 or IEC:62722 with all necessary accesories as required.150W LED Flood light |
| 240 | S.I.T.C of following rating surface mounted LED tube lightfitting suitable for 230V 50Hz, single phase supply etc. complete as required.20w/22w LED tube |
| 241 | S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required. |
| 242 | Supply of LED Street light (45/48W) |
| 243 | 2' X 2' LED Panel Light (34W) |
| 244 | 18/20W LED Round Downlight |
| 245 | 12\\" (300mm) Exhaust fan |
| 246 | 16\\" (400mm) Wall fan |
| 247 | Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required. |
| 248 | S/F piano type switch/socket - Supplying and fixing following modular tyep switch/socket on the existing switch box/cover including connections etc. as required. |
| 249 | 5/6 amps, one way switch |
| 250 | 3 pin 5/6 amps, socket outlet |
| 251 | Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 252 | Supply, fitting, fixing and testing of 1200mm Sweep, BLDC, 5Star Fan.32 W |
| 253 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required. |
| 254 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 255 | S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 256 | S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required. |
| 257 | S/F 'B' series, S.P. MCB -Supplying and fixing 6 amps to rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.6/32 amps, single pole \\"B\\" series |
| 258 | Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)8 way, single door |
| 259 | S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 260 | 40 amp |
| 261 | 63 amp |
| 262 | Supplying and fixing 20 amps 240V, SPN industrial socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, SP MCB insheet steel enclosure on surace or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc. |
| 263 | Supplying and fixing following size/ modules G.I. box along with modular base & cover plate for modular switches in recess etc as required. |
| 264 | 4 module (78mm x 140mm x 50mm) |
| 265 | 6 module (78mm x 205mm x 50mm) |
| 266 | 8 module (78mm x 230mm x 60mm) |
| 267 | 12 module (135mm x 205mm x 60mm) |
| 268 | Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. |
| 269 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit. |
| 270 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A from nearest switch board and wall fans) |
| 271 | 2 X 4 sq. mm + 1 x 4 sq.mm Earth Wire (Sockets) |
| 272 | 2 X 2.5 sq. mm + 1 x 2.5 sq.mm Earth Wire (Switch Boards) |
| 273 | 4 X 16 sq. mm + 2 x 6 sq.mm Earth Wire |
| 274 | 4x6 Sqmm +2x6 sqmm earth wire.(to be used for all LDB & UPS DB.) |
| 275 | 4 X 10 sq. mm + 2 x 6 sq.mm Earth Wire |
| 276 | Earthing with G.I. earth pipe 4.5mtr. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required. |
| 277 | P/F 25mm x 5mm copper earth strip in surface/ recess :-Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required. |
| 278 | S/L 25 mm x 5 mm G.I. earth strip in ground :-Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc. |
| 279 | P/F G.I. lightning conductor finial :-Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 280 | G.I. earth plate electrode :-Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 281 | S/L 8 SWG copper wire in ground - Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required |
| 282 | P/ F G.I. Lightning conductor tape in horizontal run :-Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run). |
| 283 | P/ F G.I. Lightning conductor tape in vertical run :-Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run). |
| 284 | Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 285 | Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. |
| 286 | 3.5c x 185 sq.mm |
| 287 | 3.5c x 70 sq.mm |
| 288 | Supplying PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor- 3.5 core, 50 sq.mm |
| 289 | Supplying PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor- 3.5 core, 95 sq.mm |
| 290 | Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 291 | Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 292 | 1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required. |
| 293 | 3.5c x 185 sq.mm (57mm) |
| 294 | 3.5c x 70 sq.mm (38mm) |
| 295 | S/F T.P. MCB DB:-Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.6 Way (4+18) Double Door, Horizontal type |
| 296 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing & commissioning etc. as required. |
| 297 | 63A rating, TPN MCB, \\"C\\" curve 10 KA breaking capacity. |
| 298 | 40A rating, TPN MCB, \\"C\\" curve 10 KA breaking capacity. |
| 299 | 6/32A rating, SPN MCB, \\"C\\" curve 10 KA breaking capacity. |
| 300 | Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required. |
| 301 | 25 amps |
| 302 | 40 amps |
| 303 | S/F MCCB in cubical panel board :-Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250A, TPN MCCB, 35kA |
| 304 | 4 pole MCCB 315 A,35 KA with fixed thermal magnetic setting. |
| 305 | 320 amps, 4 pole Changeover |
| 306 | S/F MCCB in cubical panel board :-Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100A, TPN MCCB, 16kA |
| 307 | OUTGOINGS/F MCCB in cubical panel board :-Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.63A rating, TPN MCCB, 16kA |
| 308 | 400 amp 415 V heavy duty three phase with neutral bus |
| 309 | 40 A, DP MCB |
| 310 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required 40A rating, TPN MCB, \\"C\\" curve 10 KA breaking capacity. |
| 311 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required63A rating, TPN MCB, \\"C\\" curve 10 KA breaking capacity. |
| 312 | SIF Busbar chamber :-Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required 300 A, 415V heavy duty three phase with neutral Copper busbar chamber |
| 313 | S/F Panel mounted changeover :-Providing and fixing following capacity 4 pole ONJoad panel mounted changeover switches in existing cubical panel board, making connection, earthing the body etc. as required. Electro-mechnical lock for auto changeover -1 set: 125A, 4P |
| 314 | S/F HRC fuse type TP&N switch disconnector :-Providing and fixing following TP&N discorurector fuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes in metal board, making connections. etc. as required HRC Fuse- 100 Amps TP&N for control supply |
| 315 | S/F wall floor mounted cubical panel board, fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector including busbar chamber, insulator and painting etc as required (but without busbar copper chamber) |
| 316 | Electronic timer-on delay/off delay for 0 to 30sec. |
| 317 | Auxiliary cotactor(1NO+1NC) , 32 A , IS/IEC/60947-4-1 |
| 318 | LED indicator lamp R/Y/G/B |
| 319 | 3-way 4 Pole Selector switch |
| 320 | Analog Volt Mtr. (0-500Volt) |
| 321 | Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5 |
| 322 | Digital Amp Mtr. (0-500Amp)- 3 phase class 0.5 |
| 323 | C.T. Coil of C.T. ratio 300/5 IS : 2705 part-3 |
| 324 | C.T. Coil of C.T. ratio 800/5 IS : 2705 part-3 |
| 325 | 50 mm x 5 mm copper tape (2.30 kg/mtr) |
| 326 | 20 mm x 3 mm copper tape (0.533 kg/mtr) |
| 327 | 10 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable. |
| 328 | 6.0 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable. |
| 329 | 2.5 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable. |
| 330 | 1.5 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable. |
| 331 | 1.5Tr. 5 Star split A.C (Inverter Type) I91391-part-I |
| 332 | Copper Tube of size 7f 2\\" for split ac tl;:ritT/7.S/2/3 tr capacity includins nitride rubber insulation |
| 333 | 4 KVA wall mounted automadc voltage stablizer from range 140V to 280V |
| 334 | Drain Pipe for AC |
| 335 | Outdoor stand for 1.5Tr Split AC |
| 336 | Silent type D.G Set of capacity 100 KVA With AMF Panel IS/IEC-60034- 1 IS: 1460 IS: 13018 |
| 337 | 7 Oil (Fuel) Filter for 30 to 60 KVA D$set |
| 338 | Mobil Filter for 30 to 50 KVA DG set |
| 339 | Air (inner + outer) Filter for 30 to 60 KVA DG set |
| 340 | SMPS 12V Battery charger for DG se |
| 341 | Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 50mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (Main LT panel) |
| 342 | Providing, Fixing, Testing & Commisioning of 'C' Class heavy duty MS pipe conforming as per IS-1239 including all fittings such as bend, tees, elbows, reducers including one coat of synthetic priper and two coats of Red Enamel Paint for fire hydrant, Sprinkler and Fire Hose Reel System. |
| 343 | 150mm dia |
| 344 | 80mm dia |
| 345 | 25mm dia. |
| 346 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :150mm dia. |
| 347 | Providing and fixing GM oblique type Hydrant Valve with 63 mm outlet/inlet GM instantaneous female coupling with rubber cap and chain conforming to IS:5290 including matching flange, gasket, nuts & bolts complete.Make : Kartar/Newage/Arihanta) Single Headed |
| 348 | Providing and fixing 63 mm dia rubberized rubber line hose pipe in 15 mtr length conforming to IS:636 type A ISI marked with gun metal male and female instantaneous coupling conforming to IS:903 wounded with 18 SWG copper wire complete.Make : Kartar/Newage/Arihant |
| 349 | Providing and fixing SS branch pipe with 20 mm nozzle conforming to IS:903 complete.Make : Kartar/Newage/Arihant |
| 350 | providing and fixing swinging,wall mounting type First Aid Hose Reel of approved quailty and made from compressed steelm sheet with dust cover,cast iron brackets including 30m long,19mm nominal bore,high pressure braided rubber hose as per IS:444 Type hose guide, PVC Shut off nozzle with 6mm outlet and 25mm nominal bore gun matel inlet valve Make: Kartar/Newage/Arihant |
| 351 | Supplying and fixing Air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 352 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 353 | (A) Supplying, installation, testing and commissioning of electric drivenpressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming toIS: 1520.(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS: 325.(D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(E) Suitable cement concrete foundation duly plastered and with anti vibration nadeTerrace pump 450 lpm, 35 M head |
| 354 | Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42 with 400 Amp aluminium bus bar as required. |
| 355 | Fire pumps panel |
| 356 | Incoming |
| 357 | 1 No. 200 Amp, TP&N MCCB |
| 358 | 0-400 Amp digital ammeter with one set of current transformer |
| 359 | 0-500 volt digital voltmeter with RYB indicator lamps, HRC control fuses. |
| 360 | Outgoing |
| 361 | 1 Nos of 200 Amp TP&N MCCB (1 No for EDFP ) |
| 362 | 1 Nos of (suitable for 40 HP pump) DOL starter with over load protection, current sensing type single phase preventer with all accessories and internal wiring complete as required for automatic operations (1 No for EDFP) |
| 363 | 1 sets 0-400 Amp digital ammeter and 1 sets current transformers. |
| 364 | 1 sets of selector switches for auto / manual operation, Local / Remote / OFF and ON / OFF / TRIP indications. |
| 365 | Manual DOL Starter (For Terrace pump) (5HP)-2 pcs |
| 366 | Supply & Installation of CONVENTIONAL type Fire Alarm and Control Panel with battery(4 ZONE ). Make :Ravell/Agni |
| 367 | Providing and Fixing Manual Call Point. Make : Ravell/Agni |
| 368 | Providing and Fixing Hooter 24 V suitable for theControl Panel.Make : Ravell/Agni |
| 369 | Providing & Fixing 2 core 1.5 sq mm FRLS wires (in pvc conduits).Make : Polycab/Mescab |
| 370 | Non Schedule |
| 371 | NON-SCHEDULE ITEMS |
| 372 | Devraj Mild Steel sheet Double Door with locking arrangment (4) Fire Hose Cabinet, Warranty 1 Year |
| 373 | CHINMAX Extinguisher Fire Carbondioxide 4.5 kg,duly charged, Portable and complete as per defence specification CHINMAXR(EXT FIRE DEFENCE CO2 4.5 KG DULY CHARGED PORTABLE)Capacity 4.5 kg ISI Marked |
| 374 | Ecofire Portable Fire Extinguishers as per IS 15683 (2018) Low Pressure Extinguisher (Service Pressure ≤19 bar) Powder Based (as per IS 4308 ) Class -Aa) Capacity 6 kg ISI Marked |
| 375 | B) DEFLAME EXTINGUISHER FIRE MECH FOAM 9 LTRS CAPACITY and complete as per defence specificationDEFLAMER (DFEMF09) |
| 376 | FIRE BUCKET SET |
| 377 | TWO SEATER Class Room Desking / Seating ONLY TABLE / DESK WITH SHELF / STORAGE UNDER DESK-Knock down class room dual desk is specially designed for rugged use. The desk are made of pressed formed MS CRCA section& CRCA tube fitted with pre laminated Particle board top, seat & back with Machine pressed PVC egde banding 2 mm thickglued with industrial adhesive and diffused with board monolithically. hook for water bottle and bag. The overall appearance of the product shall be as per indicative potographs attatched:DESK TOP-18mm Both Side laminate(BSL) PreLam Partical Board 400 mm wide BENCH TOP-18mm Prelam Partical Board 330 mm widdh SHELF-18mm Prelam Partical Board 300(Wide)mm.BACK-18mm Prelam Partical Board 250(W)mm.Modesty-18mm Prelam Partical Board 300 (W)mm.Supporting Understrucure- Left Hand and Right Hand FRAME consisting of vertical, horizontal and Cross Member made up of 25 x 1.2 mm dia tube confirming to IS Grade 4932 and shall be finised with epoxy polyster powder coated finish with DFT 50-60 Micron confirming IS 13871:1993. The support system of Bench and Shelf shall also made up of made up of 25 x 1.6 mm dia ERW tube confirming to IS Grade 4932 and shall be finised with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993.. Legs shall be fitted with PVC Leveler. Construction is Semi knock down form WO SEATER 1050Wx915D x 650 (H)- Desk Depth 390-400 mm. Seat Height 375 mm for Class 6-8) |
| 378 | 3 seater -Sofa Made Of Good Quality Products Of MSPL Standard Models . 12mm Ply Used Made Of Back & Base . Upholstery Made Of Prime Quality Rexine Black . Base Seat Moulded With Foam , ( 90mm + 21mm ) Thick , D- 28KG/m3 . Back Seat Moulded With Foam , 45 Thick , D - 28KG/m3 . Arm rest Moulded With Foam , 45 Thick , D - 28KG/m3 . Back Inserted Foam , 21 Thick , D - 28KG/m3 . Ends Of The BJ 3S Sofa Structure PVC Caps . Sofa L Brakets & Base Frame Made Of Prime Quality MS . Fastners Nut Bolt 4Nos . Size M8 x 38mm . Sofa Structure Shall have MS Spring Base . Understructure Made of Base Frame 20 x 20 Square SS Pipe 1.2mm Thick . Support Frame Made Of 12mm Dia Round SS Pipe 1.2mm Thick . Side Frame Made Of 25mm Dia Round SS Pipe 1.6mm Thick . Pinewood 25W x 25mm Thick . Seat Height From Bottom To Base 458mm Back Height From Base Seat To Top 356mm . Hand Rest Width 150mm . All SS Pipes Shall Be Welded Properly Strongly and conformity with regulations . Sofa Structure Stailness Steel Pipe Shall Be Abrasive Polished External Finished . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 2 seater -Sofa Made Of Good Quality Products Of MSPL Standard Models . 12mm Ply Used Made Of Back & Base . Upholstery Made Of Prime Quality Rexine Black . Base Seat Moulded With Foam , ( 90mm + 21mm ) Thick , D- 28KG/m3 . Back Seat Moulded With Foam , 45 Thick , D - 28KG/m3 . Arm rest Moulded With Foam , 45 Thick , D - 28KG/m3 . Back Inserted Foam , 21 Thick , D - 28KG/m3 . Ends Of The BJ 3S Sofa Structure PVC Caps . Sofa L Brakets & Base Frame Made Of Prime Quality MS . Fastners Nut Bolt 4Nos . Size M8 x 38mm . Sofa Structure Shall have MS Spring Base . Understructure Made of Base Frame 20 x 20 Square SS Pipe 1.2mm Thick . Support Frame Made Of 12mm Dia Round SS Pipe 1.2mm Thick . Side Frame Made Of 25mm Dia Round SS Pipe 1.6mm Thick . Pinewood 25W x 25mm Thick . Seat Height From Bottom To Base 458mm .Back Height From Base Seat To Top 356mm . Hand Rest Width 150mm . All SS Pipes Shall Be Welded Properly Strongly and conformity with regulations . Sofa Structure Stailness Steel Pipe Shall Be Abrasive Polished External Finished . The product should bear IGBC Green Pro certificate for product categFory. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 379 | Table 900W x 450D, 18mm thick PLPB top, 40x40x1.2mm CRCA powder coated frame. Table Top 18 mm Thick PLPB Board as Per Approved Laminate Shade. Understructure Made Of Prime Quality CRCA 40 x 40 x 1.2mm Square Metal Pipe. Table Top Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading.Understructure CRCA Metal Pipe 25X25mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe. Table Understructure 850W X 550D In 25 X 25 Square Pipe With 1.2mm Thick. Height Of The Understructure 700mm. Legs Of The Table Hard Rubber Shoes. All Metal Shall Be Powder Coated After Being Treated With at Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . Metal Storage ( 1D + 1S ) Made Of Prime Quality 22guage CRCA Metal Sheet Tank Treatment With Minimum 45 - 50 Micron Powder Coating. Legs Of The Table Hard Rubber Shoes. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 380 | Non-Revolving and Non Tilting chair with Armrest-Metal Chrome frame, Leatherete seat & back. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 381 | SYSTEMS MODULAR TABLE -Table Top 25mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade. Metal Structure Size 1450W x 700D x 725H . Understructure Made Of Prime Quality CRCA 38x38mm Square Metal Pipe. Metal Modesty Panel Perforated Sheet With 0.8mm Thick Powder Coated. Worstation Provided Mobile Drawer ( 3D ) with Telescopic Channel, Fittings & C Type Handles & Lockes. Legs Of The Storage Movable PVC Casters . Legs Of The Workstation Hard Rubber Shoes. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 382 | Wooden Almirah |
| 383 | Revolving Chair With ArmCentre pivot mechanism-Medium Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed Supported Back Inner PP Structure . Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric . PHA ( Gas-Lift ) 105mm ( TDC 171mm & BDC 66 ) . Understructure Base Revolving Pedestal Steel Inserted PP Base With PP Hub Cap . Machanism Torsion Bar Adjustment Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism .Machanism Provided Upright Position Locking . Chair Max Height 980 & min Depth 715 . 470W x 430D Base Seat 70mm Thick Moulded With PU Foam , D - 42 kg/m3 , H - 20 & 430W x 470H Back Seat 50mm Thick Moulded With PU Foam , D - 42 kg/m3 , H - 20 . Base Seat Shell ABS Cover At Underside . Back Seat Shell ABS Cover At Back Side . L - Patta Mild Steel . Beading Finish NA . 440/540 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest PP . Arm Rest Height From Seat 170mm . Height From Seat To Ground 440mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 715mm With Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 384 | Modular Work Stations withFour Seater Plus Shape Clusterwith Curvilenear Top-Top to be made up of ISI mark 25 mm thick pre laminated Particle Board finished with 2 mm thick PVC edging applied on Through Feed Edging Machine UNDERSTRUCTURE- The under structure to be made up of CRCA, C shaped legs shall be of pipe of size 50x50 mm and 40x40 cross member for support and stability finished with powder coating. SCREEN- Divider screen of size1500x300mm to be fixed above the table top level. The fabric screen to be in 30/32mm thickness having aluminium sections all 4 sides. Race way– CRCA raceway for carrying electrical and data wiring are provided below the table top with provision for fixing switches. Each cluster to be provided with wire riser from floor to wire raceway and aluminium access flap on worktop for easy access to electrical switches . PEDESTAL, KEY BOARD AND CPU TROLLEY ARE NOT CONSIDERED IF REQUIRE COST WILL BE EXTRA. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for LAB FURNITURE range for ergonomic design. |
| 385 | 6 Seater Restaurant Table-Table Top Designed With 25 mm PLPB . Top Size 1800W x 900D. Understructure Leg Designed With combination of 50x50 and 40X40mm Square CRCA 16 Guage Thick Duly powder Coated . Legs Of The Table Hard Rubber Shoes. Wooden Panels Prime Quality Board With ISI Marked . MIG Welding All - Around The Weld Joints Using Inert Gas (Argon.) The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design. |
| 386 | NYLA - HB H : 1250 ±10W : 720 ±10D : 720 ±10Revolving Chair With Arm Swivel tent mec- High Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat & Back Plywood Made Of 15mm Hot Pressed Supported . Upholstery Structure Moulded With Prime Quality Leatherite . PHA ( Gas- Lift ) 85mm (TDC 152mm & BDC 67) . Understructure Base Revolving Pedestal Chorme Plated Steel Base With PP Hub Cap . Machanism Tilt Adjustment Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking . Chair Max Height 1250 & min Depth 730 . 500 x 490 Base Seat100mm Thick Moulded With PU Foam , D -45 kg/m3 , H-18 & 520W x 690H Back Seat 100mm Thick Moulded With PU Foam , D -45 kg/m3 , H-18 . 470/580 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 200mm . Arm Rest PU Moulded . Height From Seat To Ground 500mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 720mm With Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 387 | Almirah Steel shelving cabinets-Overall Size 915W x 485D x 1980H . Office Almirah Made Of Prime Quality CRCA Ms Sheet Panels 0.8mm Thick Powder Coated Finish With Approved Shade . Each Shelve Made Of 0.8mm CRCA MS Sheet Powder Coated . Each Shelve Shall Be Formed Such The Edges Are Bend Two Times At Right Angle. Front Shutter 1mm Thick CRCA Ms Sheet Powder Coated Riveted With Hinges. . No Sharp Edges Of Almirah Ends . All Shelve Rack Divided Into Equal Parts . Leg Shall Be 125 x 90 X 452MM 2 Nos With 1mm Thick CRCA Metal Sheet Powder Coated . Door Die Cast Chrome Plated Handles Fitted With Washer & Double Nut . Handles Ring Made Of PVC Cap . Locking Bright Bar 10mm Dia . Almirah All Metallic Panels Screw With Nut & Bolt . Bottom Shelve 125mm High Up To Ground . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STORAG FURNITURE range for ergonomic design. |
| 388 | Wooden Podium design Gable end and modestypanel and top material Teak wood-Top Designed With 18 mm Thick Commercial Board Affixed With 0.6mm Mica . Support Structure Of Podium Designed With Solid Wood . Modesty Panel Having Affixed With Veneer Pressed With Polish . Modesty Panel Design With Solid Wood And Beading . All Edge And Structure Finished With Proper Color Combination Matched To Laminated Shade. Front & Side Designed By 25mm Commercial Board With 3mm Shisham Vineer Duly Wallnut Polish Finish . Table Made By Joint Of Two Wooden Parts . Legs Of The Podium Hard Rubber Shoes. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 389 | Non-Revolving and Non-Tilting chair with Armrest-1)SEAT/BACK ASSEMBLY: The seat and back should be made from 1.0±0.1cm. thk. hot pressed ply and should be true resistanttant commercial plywood and upholstered with P.U. foam and fabric.BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D)2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density =45+1-2 kg/m3and Hardness load 16 ± 2 kgf for 25% compression.3)UNDERSTRUCTURE ASSEMBLY: The assembly should be a mainframe made of 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube and a welded leg tube made of dia. 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube to the form the complete assembly which should be black powder coated (DFT 40-60 microns). |
| 390 | OFFICE TABLE CUM LIBRARY READING TABLE SIZE-Table Top 25mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade.Understructure Made Of Prime Quality CRCA 25x25mm Square Metal Pipe. Metal Structure Width 850mm & 550mm Depth. Understructure CRCA Metal Pipe 25X25mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe. Legs Of The Table having Hard Rubber Shoes. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be powder Coated. After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Thickness Of Coating (60 – 80) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for hostel FURNITURE range for ergonomic design. |
| 391 | 10 seaters Meeting Table TABLE-Conference Table Top 25mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick PLPB Board. Modesty Panel Prime Quality 18mm Thick 600 mm High PLPB Board Supported To Top. 7 mm High Pvc Bofurs Screw With Gable - end.Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading.Conference Table Top Round Type Corner With Between Part Hollow Section. Conference Table Top Divided Into Various Parts Top Joints With Gable - End Minifix & Dowels . All Table Top , Gable & Modesty Panel Fix Joints With Minifix Dowels & Other Fittings Equipment . All Wooden Panels Cleaning Corner & Round Corner Knitted Finish. Four Gable - End Round Side Taper Fix To Top . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 392 | Material : PP Perforated Sheet & High Density Foam Cushion On Seat , Frame In M.S 25Mm Diameter Oval Pipe Duly Black Powder Coating Without Arms.Built With Heavy Duty 16 Gauge Metal Pipe Structure & Seating Based On 3D Bent Hot Pressed Ply. Bush : 25 Mm Diameter Bush Used On Chair Legs For More Gripping On Surface.Tablet In Bsl 18Mm Thick Board With All Side Edge Banding And Black Laminated On Pressed In Tablet. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design |
| 393 | Wooden Almirah, Height 750 |
| 394 | DNR SYSTEMS MODULAR TABLE LX D & H 2400 millimeter X 1200millimeter 750 millimeter |
| 395 | LIBRARY TABLE SIZE - 1200W x 900D x 770H Table Top 25mm Thick PLPB Board as Per Approved Laminate Shade. Total Height Of The Library Table 770mm. Metal Structure Width 1150mm & 850mm Depth. Understructure Made Of Prime Quality CRCA 25x25mm Square Metal Pipe. Perforated Modesty Panel 0.8mm Thick CRCA Metal Sheet with 25 mm square pipe boundry. Upper Wooden Panels 18mm Thick PLPB Board Used For Book Shelve. Table Top & Upper Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. Upper Wooden partition/storage size : 300 mm H x 300 mm D. Understructure CRCA Metal Pipe 25X25mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations.CO2 Welding Shall Be Used. All Metal Shall Be Powder Coated After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust. Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Coating thickness must be between 60 to 80µ. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design. |
| 396 | Executive Table with Both side pedestal unit-Table Top 25 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade.Understructure 1320W X 655D X 725H Made Of Prime Quality 1.2 mm Thick CRCA 25x25mm Square Metal Pipe. Understructure CRCA Square Metal Pipe 25X25mm With 1 mm Thick Four Side Welded With Vertically Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating, . Metal 1st Storage (3D) & Other 2nd Storage ( 1S ) Made Of Prime Quality 0.8mm Thick CRCA Metal Sheet Tank Treatment With Minimum 45 - 50 Micron Powder Coating With Locking Facility . All Frames Rectangular Pipe & Square Metal Pipe Closed With Pvc Caps . Legs Of The Table Hard Rubber Shoes . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special ThermalControl Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² .Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. |
| 397 | Non-Revolving and Non-Tilting chair with Armrest- 1)SEAT/BACK ASSEMBLY: The seat and back should be made from 1.0±0.1cm. thk. hot pressed ply and should be true resistanttant commercial plywood and upholstered with P.U. foam and fabric.BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D)2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density =45+1-2 kg/m3and Hardness load 16 ± 2 kgf for 25% compression.3)UNDERSTRUCTURE ASSEMBLY: The assembly should be a mainframe made of 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube and a welded leg tube made of dia. 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube to the form the complete assembly which should be black powder coated (DFT 40-60 microns). |
| 398 | Unbranded Portrait/ Landscape Not applicable Fabric Pin Up Notice Boards |
| 399 | 15 Passenger elevator with 5 stops without machine room as per specification - 282 - KONE I MonoSpace R22.1 - 2 (a. price validity 12 months from date of signing order, b. Warranty 12 months from date of handing over) |
| 400 | Supplying, installing, testing and commissioning of Dome camera 1/2.8\\" CMOS, F1.6~F3.3, Fixed Iris, 120dB, 50m IR, 0.001Lux, 1920x1080@30fps, 512 GB SD card slot, IP67, IK10, PoE, Built-in Mic, Audio 1/1, Alarm 2/1, Reset button, Smart VCA function, Face capture mode, Full Metal HousingMake : Pelco/Birdeye/Axis |
| 401 | Supplying, installing, testing and commissioning of Bullet camera 1/2.8\\" CMOS, F1.6~F3.3, Fixed Iris, 120dB, 80m IR, 0.001Lux, 2592x1944@30fps, 2MP@60fps, 512 GBSD card slot, IP67, PoE, Built-in Mic, Audio 1/1, Alarm 2/1, Reset button, Smart VCA function, Face capture mode, Full Metal Housing.Make : Pelco/Birdeye/Axis |
| 402 | Supplying, installing, testing and commissioning of PVCJunction Box |
| 403 | Supply, Installation, Testing & Commissioning of 43\\"Commercial display built in Android OS |
| 404 | Supply ,Installation, Testing & Commissioning of Server Grade Machine with Minimum 3 Ghz Processor, 8GBRAM, 1 TB Hard disk along with necessary as required. |
| 405 | Supply of Surveillance Hard Disc Drive 6TB, Make :Seagate/WD/Toshiba |
| 406 | Supply & fitting of ShyamJyoti™ LED Based Solar Street Lighting System Luminary : 12W LED Luminary Luminary Housing- Weather Proof Housing Structure- Hot Deep Galvanized Module Pole : Hot Deep Galvanized MS Pole (4.5 Mtr.)Battery Box : Corrosion Resistant Painted Power Coated Metal Battery Box Other : Suitable Cable, Etc. Battery : 19.8Ah 14.8V Lithium-Ferro Battery of MNRE Approved Module : 75Wp of HBL / Gautam Solar/IEC Equivalent Cost includes 10% CP & 5 % OHC) |
| 407 | SITC of 220\\"(16:9) Tubular Motorized screen with LVC, I.R Remote & Matte White Fiber Glass Fabric Matt White along with all supporting accessories. Make:-Grandview/Da-lite/Drapper/Suvira |
| 408 | SITC of Projection system with Projector & Lens :[Projection size],Aspect ratio: 16:10(WUXGA),Diagonal: 5.660 m / 222.85 in / 18.57 ft,Height: 3.000 m / 118.11 in / 9.84 ft Width: 4.800 m / 188.98 in / 15.75 ft,[Projection distance] L: 4.785–6.438 m / 188.38–253.45 in / 15.70–21.12 ft,[Optical shift range],VS1: 1.500 m / 59.06 in / 4.92 ft VS2: 0.480 m / 18.90 in / 1.57 ft,HS1: 1.344 m / 52.91 in / 4.41 ft,HS2: 0.480 m / 18.90 in / 1.57ft,[Brightness], Projector output: 9,400 lm,Screen illuminance: 653 lx and should also comply that it is having DLP™ chip Panel size-17.0 mm (0.67 in) diagonal (16:10 aspect ratio),Display method-DLP™ chip × 1, DLP™ system,Pixels-2,304,000 (1920 × 1200) × 1, total of 1,024,000 pixels,Lens-Powered zoom/focus lenses,Light Source-Laser Diode Laser class 1,Illumination of Life Set- Should be Vary depending on operation mode setting.20,000 hours at half luminance NORMAL /QUIET1/ QUIET2)/24,000 hours at half luminance (ECO)* Temperature: 30°C (86°F), Altitude 700m (2,297 ft),Dynamic Contrast3,Under conditions of 0.15 mg/m3 of particulate matter Lumen maintenance rate(rough estimate) : 5000 hours 80% / 10000 hours 70%,43,800 hours at constant luminance (LONG LIFE1),61,320 hours at constant ,luminance (LONG LIFE2),87,600 hours at constant luminance (LONG LIFE3). Preffered Make- Panasonic, Hitachi,Sony |
| 409 | SITC of Celing Mount Kit for Projector with accessories; Make Custom |
| 410 | SITC of 4K Transmitter HDMI bidirectional RS232 and IR over high definition base1, Make-Prefferred Make-Crestron/Lightware/Key-Digital/Kramer |
| 411 | SITC of HD Scaling Auto-Switcher & HDMI® over CATx Extender with Wall Plate Transmitter and surface mount receiver Black in colour to be installed at Podium(Transmitter) and Control Room(Receiver); Prefferred Make-Crestron/Lightware/Key-Digital/Kramer |
| 412 | SITC of High Power 2-Way Flyable Loudspeaker with 1 x 15” LF & Rotatable Horn, Coverage Pattern: 120° x 60° or better, rotatable waveguide, Frequency Response (±3 dB): 40 Hz – 18k Hz or better, Maximum SPL: 130 dB Peak or better, Sensitivity: 96 dB SPL or better, Power: 600 W or better; Should be Bi- amp/passive switchable, High Frequency Driver: 1.5\\" or better. |
| 413 | Installation accessories for mounting the above FOH arrayable speaker, i.e. eyebolt, rope wire and claimp etc as per site condition. |
| 414 | SITC of Advanced Feedback Suppression; Stereo or Dual Independent Channel Processing; 2In 2 Out; Max input line level = +20 dBu; A/D Conversion =24-bit; THD+Noise 0.003%; Should have Wizard Setup Function; Should have Full LCD Display; 24 Programmable Filters per Channel; Live and Fixed Filter Modes; 24 LED per Channel Filter Metering; Input Impedance: Balanced 50kΩ, Unbalanced 25kΩ; Frequency Response: 20Hz – 20kHz, +/- 0.5dB; Crosstalk input to output:>80 dB |
| 415 | SITC of Four Channel Digital Power Amplifier, 600W@4 Ohms, On-board Digital Signal Processor and includes these integrated features: Input Router , Input Delay – Up to 1000ms , Input Parametric EQ – 8 band , Crossover , Output Parametric EQ – 8 band ,Output Delay – Up to 100ms , Limiter, \\"Should be controllable, configurable and monitorabe through standard TCP/IQ network.\\"; \\"Each output channel should be capable of providing either 70V or 100V for high impedance applications.\\"; Completely configure the amplifier using an intuitive front-panel interface. Should have GPIO/AUX Port to Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined; Digital Signal Processing :96kHz, 32-bit floating point; Voltage Gain : 34dB; Frequency Response (8Ω, 20Hz - 20kHz): +/-0.25dB; THD : 0.35%; SNR:>104dB; Damping Factor : >1000; Crosstalk: >80dB; 4x600 W at 4 Ohm ,8 Ohm 70V , and 100 V |
| 416 | SITC of Volume Controller, Should be Compatible with supplied DSP, Should support PoE (Power Over Ethernet); 8 Programmable Buttons (Multicolored) Capable to trigger any DSP logic; Multicolored 2 Programmable 64x128 Pixel LCDs; Sleep Function; Security: Remote Lock/Unlock and Local Unlock via PIN Entry; Should have knob and capable to control 8 zones separate |
| 417 | SITC of Analog Audio Mixer with 16 mono microphone channels , 4 stereo returns, 4-bus architecture, with sub-group routable to mix , Built-in 24 bit digital effects processor , 32 FX settings , Tap Tempo , 3 FX parameter adjust rotaries , User FX settings store function , Direct outputs for multi-track recording individually switch-able for pre-post-fade operation ,Inserts on all mono channels , Inserts on stereo mix output , Classic Soundcraft 3-band EQ with swept mid-band , Stereo 18dB/octave 100Hz high-pass filter , Dual global +48V phantom power split channels 1-8 and 9-16 , Channel Mute control , 10-segment tri-coloured metering, Two sub-group outputs , Separate mono sum output , Integral universal power supply |
| 418 | SITC of Wired Dynamic Vocal Microphone; Super cardioid vocal microphone; Audio frequency bandwidth :70 - 20000 Hz; Sensitivity2.6 mV/Pa |
| 419 | SITC of Patch box with 08 connector options for mic & stage monitor |
| 420 | 2.5 Sq. mm Speaker Cable, 100 M roll (Approved Makes: Bandridge, Klotz,Belden, Krystal) |
| 421 | 23/0.2 mm Mic Cable, 100 M roll (Approved Makes: Bandridge, Klotz, Belden,Krystal) |
| 422 | Control Cable STP Cat 5e (Approved Makes : D-Link, 3C3, Belden, MX orequivalent) |
| 423 | SITC of Connectors & Patch Cables. (Approved Makes : Neutrik, MX or equivalent) |
| 424 | Mic Stand (Approved Makes: Standard make) |
| 425 | Wooden Podium alongwith Cable Cubby (One HDMI Cable, Two LAN Cable, Twounswitched AC outlet,One 3.5 mm Mini Stereo Audio Jack,Compact size with square bezel Black color |
| 426 | Add GST 18 % |
| 427 | Add Labour cess 1% Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail