|
| 1 | Taking down chowkhat or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 2 | Taking down chowkhat or frame with shutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed. |
| 3 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as per specified and directed. |
| 4 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified and directed. |
| 5 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 6 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 7 | M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement, PVC strips/beadings any sizes/shapes and fixing at site on PVC frame as per manufacturers specifications and drawing etc complete all as specified and directed. |
| 8 | M&L 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed. |
| 9 | M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and directed. |
| 10 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauze shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauzed shutter and powder coated aluminium grill 4mm dia, 75 x 75mm aperture fixed with standard aluminium beading fixed in outer portion of the chowkat complete all as specified and directed. |
| 13 | M&L 35mm thick factory made flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkat complete all as specified and directed. |
| 14 | M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 15 | M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 16 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawings complete all as specified and directed. |
| 17 | M&L Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face with particle board core complete all as specified and directed. |
| 18 | M&L powder coated anodized aluminium frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 19 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, 100mm long hinges - 03 Nos, Aluminium mortice lock - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc complete all as specified and directed. Note: Glass shall be measured separately. |
| 20 | M&L powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 21 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 22 | M&L for 4 mm thick aluminium composite panel board of minimum tensile strength 4.5 Kg/Sqmm fixed in aluminium frame work complete all as specified and directed. |
| 23 | M&L for 4 mm thick sheet glass ordinary quality and glazing each pane fixed with neopune rubber gasket in aluminium frame work complete all as specified and directed. |
| 24 | S&F 100 mm Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and directed |
| 25 | S&F 200mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and directed. |
| 26 | S&F 150mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and directed. |
| 27 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed . |
| 28 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 29 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 30 | M&L 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 32 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation .etc in soft/loose soil complete all as specified and as directed |
| 33 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 34 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 35 | M&L for 75mm thick PCC, (1:4:8) type D2 (using 40mm graded aggregate)as in sub floors complete all as specified and directed. |
| 36 | M & L chequered coloured cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 37 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding complete all as specified and directed. |
| 38 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 39 | M&L for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc.laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 40 | M&L for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 41 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7 -8mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 42 | M & L for colour glazed ceramic wall tiles of size 450x300x7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall. cement screed bet set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. . |
| 43 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified and directed. |
| 44 | M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surface) complete all as specified and directed. |
| 45 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 46 | M&L for RCC 1:2:4 type B-1 (Nominal mix) (using 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, roof beam, landings, balconies, fascias, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 47 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed. |
| 48 | M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and directed. |
| 49 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed. |
| 50 | M&L 10 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces on wall complete all as specified and directed. |
| 51 | M&L 15 mm thick rendering in CM 1:4 in two layers on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 52 | M&L for preparation of new surfaces applying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. |
| 53 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 54 | Excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified and directed. |
| 55 | M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete in post, pillars complete all as specified and directed. |
| 56 | M&L Steel work in tubular trusses or rectangular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 57 | M&L Plates (plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 58 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, flat iron, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 59 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge Nanital or similar patterns roof of covering complete all as specified and directed. |
| 60 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated/trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 61 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof ridge, covering/cladding/gutter to wall fixed with self tapping screws or \\"J\\" hook complete all as specified and directed. |
| 62 | M&L 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 63 | M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 64 | M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 65 | M&L 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches or in floors complete all as specified and directed |
| 66 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 67 | S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 68 | S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 69 | S&F PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 70 | S&F white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed. |
| 71 | S&F plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 72 | S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed. |
| 73 | S&F Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 74 | S&F vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 75 | S&F 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 76 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (Including flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 77 | S&F PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 78 | S&F CP soap dish fixed to wall with screw complete all as specified and directed. |
| 79 | S&F 15 mm bore chromium plated fancy type bib tap with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 80 | S&F 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 81 | S&F CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed |
| 82 | S&F 20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 83 | S&F brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed. |
| 84 | S&F 600 mm x 450 mm size bevelled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 85 | S&F 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopune rubber gasket in aluminium frame complete all as specified and directed. |
| 86 | M&L in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 87 | M&L in repair, for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 88 | M&L in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 89 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 90 | S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 91 | S&F in repair PVC (SWR) Bend any radius 75mm bore complete all as specified and directed. |
| 92 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 93 | S&F in repair, 600 mm x 450 mm size bevelled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 94 | S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 95 | S&F in repair vitreous china wash hand basin (Oval type) of size 550x400 mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 96 | S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 97 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed. |
| 98 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 99 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed. |
| 100 | S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter long pvc tube cover CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 101 | S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 102 | S&F in repair, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 103 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 104 | S&F in repair, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 105 | S&F in repair Vitreous China Half Stall urinal flat back, size of 600 x 395 x 365 mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including connection to flushing pipe and outgoing pipes complete all as specified and directed |
| 106 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 107 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 108 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 109 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 110 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 111 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 112 | S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 113 | S & F 20mm bore gate valve with iron wheels head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 114 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 115 | M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the side of pipes after they are laid, jointed and tested for 150mm bore of pipe lines complete all as specified and directed. |
| 116 | M & L for 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 117 | M&L for soakage well including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size of 1.20m dia and 1.50 m effective depth complete all as specified and directed. |
| 118 | M&L for On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 users complete all as specified and directed. |
| 119 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified & directed. |
| 120 | M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and complete all as specified & directed for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 121 | All as per ser item No. 120 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified & directed. |
| 122 | All as per ser item No. 120 here in before, but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified & directed. |
| 123 | All as per ser item No. 120 here in before, but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified & directed. |
| 124 | S&F in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified & directed. |
| 125 | S&F in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified & directed. |
| 126 | S&F in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified & directed. |
| 127 | S&F in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified & directed. |
| 128 | S&F in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and complete all as specified & directed. |
| 129 | S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed. |
| 130 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including suitable hole in existing wall complete as per site requirement complete all as specified & directed. |
| 131 | S&F LED light fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 132 | S&F in replacement LED panel light 36 watt efficient LED recessed luminaire 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewied complete as per site requirement and all as specified and directed. Note : Rate for removing of existing unserviceable old luminaire is deem to be included in this item rates complete all as specified & directed. |
| 133 | S&F in replacement stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified & directed. |
| 134 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified & directed. |
| 135 | S&F in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note:- (i) Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 136 | S&F in replacement TPN distribution board 415volts sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 220volts, 200 Amp rated bus bar with front openable cover suitable for TPN 4 ways MCB complete all as specified & directed. |
| 137 | S&F in replacement SPN distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified & directed. |
| 138 | S&F in replacement MCB SPN/DP 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified & directed. |
| 139 | S&F in replacement MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified & directed. |
| 140 | S&F in replacement MCB TPN 16 to 32 Amp rating 415V, 10KA 'B' curve complete with connection testing and commissioning complete all as specified & directed. |
| 141 | S&F sheet metal enclosure (factory made), VTPN Vertical Distribution Boards, IP-43 & IP-44 protection with MCCB's 160A as as incomer, Double Door, 4 way NO of modules I/C XTI 160, O/G 12 nos with 250 Amps rated copper busbar complete all as specified & directed. |
| 142 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board complete all as specified & directed. |
| 143 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
