|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or10sqm on plan), including dressing of sides and ramming of bottoms, lift upto1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. |
| 2 | b) Ordinary rock |
| 3 | Filling availableexcavatedearth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 4 | Dumping stone excluding cost of stones. in Horizontal on level |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 7 | Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid with bond stone |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for :a) Foundations, footings, bases for columns |
| 13 | b) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | c) Columns, piers, abutments, pillars, posts and struts |
| 15 | b) Suspended floors, roofs, landings, balconies and access platform |
| 16 | e) Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed inposition with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class Kail wood |
| 18 | Providing and fixing wooden moulded beading to do or and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wooda) 50x12 mm |
| 19 | b) 50 x 20 mm |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) First class kail wood35 mm thick shutters |
| 21 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):12 mm thick |
| 22 | Providing 40x5mm flat iron holdfast 40cm long including fixing to frame with 10mm dia Metre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 23 | Providing and fixing ISI marked oxidised M.S.tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm |
| 24 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 1st Class Kail wood 30 mm thick |
| 26 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; Local willow wood |
| 27 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 28 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.Ordinary cement finish using ordinary cement |
| 29 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 30 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 32 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 33 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 34 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry and curing complete but excluding coat of nosing of steps etc complete. 50 mm thick with 20 mm nominal size stone aggregate |
| 35 | Providing and fixing 12 mm thick pre laminated flooring of approved brand as per direction of engineer incharge, complete job AC-4 including carriage. |
| 36 | Providing and fixing 100mm Pine wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 10 mm thick |
| 37 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. |
| 38 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment ofmatching shade complete. |
| 40 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 41 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c trenching. refilling & testing of joints complete as per direction of Engineer in Charge. (External work) PN-16 Pipe, 25 mm OD (SDR-7.4) |
| 42 | Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes the cost of cuttingchases andmaking goodthe same including testingof joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,) PN-16 Pipe, 32 mm OD (SDR-7.4) |
| 43 | Providing and fixing PPR Unions PPR Union 32mm |
| 44 | PPR Union 25mm |
| 45 | Providing and fixing water closet squatting pan (Indian typeW.C. pan ) with 100mm sand cast I ron P or S trap,10litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with allfittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests. |
| 46 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 47 | Providing and fixing wash basin with C.I.brackets,15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps. |
| 48 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing :Circular shape 450mm dia. |
| 49 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 50 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 51 | Providing and fixing toilet paper holder :C.P. brass |
| 52 | Providing and fixing PVC soil single socketed pipe 1.80 metres long: 75mm dia complete job. a) 75mm dia or 3\\" |
| 53 | PVC soil, single socketed pipe 1.80 metres long: b) 100 mm dia |
| 54 | Providing and fixing plain bend of required degree.a) 100 mm dia |
| 55 | b) 75 mm dia |
| 56 | Providing and fixing double equal junction of required degree with access door, with fitting complete job. PVC :100mm |
| 57 | 75 mm |
| 58 | Providing and fixing PVC collar of req. dia complete job. A)100 mm dia |
| 59 | 75 mm |
| 60 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe32 mm dia |
| 61 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 63 | Providing and fixing gyerser of req. capacity including fixing with all fixture complete job. 15ltr |
| 64 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore. |
| 65 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore. Weighing not less than 62gms. |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and over flow pipes but without fittings and the base support for tank |
| 67 | Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape for inner wall fittings . complete job including carriage. 19 mm thick, 50 mm dia (OD) ( PPR 25 mmm) |
| 68 | Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , tapping with cello tape aluminum sheet 26 gauge cladding with dia . complete job including carriage. 19 mm thick, 50 mm dia (OD) ( PPR 32 mmm) |
| 69 | Providing and fixing heat tape 33Watt on PPR pipes made of denforced or chromelox or equivalent make, as approved by Engineer InCharge , complete Job |
| 70 | Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , aluminum sheet 26 gauge cladding with dia of , complete job. 19 mm thick nitrile sheet |
| 71 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter |
| 72 | Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86mm long, weighing not less than 88 grams. |
| 73 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 74 | Carriage of material from source to site by MT including loading, unloading, stacking and complete job a) Cement & Steel an average lead of 15km |
| 75 | b) Sand an average lead of 15km |
| 76 | c) Stone agg. An average lead of 15km |
| 77 | d) Stone an avg. lead of 20km |
| 78 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 79 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 80 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 81 | b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 82 | c) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 83 | c) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 84 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1 x 1.5 sq. mm |
| 85 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch |
| 86 | b) 3 pin 5/6 A socket outlet |
| 87 | c) 15/16 A switch |
| 88 | d) 6 pin 15/16 A socket outlet |
| 89 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 90 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 91 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 92 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way (4 + 18), Double door |
| 93 | b) 8 way (4 + 24), Double door |
| 94 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single pole |
| 95 | b) Single pole and neutral |
| 96 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 97 | Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length, with 3mm thick the electrode should be hot dip galvinised. The GI Electrode shall be pre filled with cristaline Conductive Material (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco friendly GI Electrode Earthing should be eco friendly GI Electorde Earthing should be maintinance free and does not require regular manual addition of water. The earthing pit should be covered with PVC cover. |
| 98 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 99 | Change over switch FP 100 Amp |
| 100 | MCCB FP 100 Amp 30 KA |
| 101 | Supply and fixing RCCB 3 Phase 100A |
| 102 | Supply and fixing RCCB 1 Phase 63A |
| 103 | Over voltage and under volatage relay 3 phase |
| 104 | Over voltage and under volatage relay 1 phase |
| 105 | Supplying and fixinng of following rating 240/415 volts \\"C\\" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp). a) SPN 63 Amp |
| 106 | b) TPN 63 Amp |
| 107 | Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE power cable of following sizes on surface/surface cable tray, 0.50mtr below ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) 35 Sq.mm twin Core- Armoured |
| 108 | 20 watt LED tube light fitting. Model/make or equivalent make and model philips/Crompton Greaves. |
| 109 | Supplying and fixing of following electrical items suitable for operating on 240/230 volts AC, 50Hz supply including connection etc. as required. Exhaust fan 250 mm size PVC HAVELLS or equivalent approved make |
| 110 | Supplying & fixing LED type down lighter 15 watt. LD-95-141-XXX-65G1 wipro or equivalent. |
| 111 | Supplying & fixing Mirror LED type 15 watt. Length = 3 feet Wipro or Philip equivalent. |
| 112 | Supplying and fixing 5-watt K-type up down outdoor LED wall light LED type. Wipro or Philip equivalent. Please Enable Macros to View BoQ information |
