|
| 1 | Civil works Sr. No-02 to 69 and Electrical work Sr. No 70 to 134 |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and ointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 3 | Providing and fixing wire gauze shutters using galvanises M.S wire gauze of verage width of aperture 1.4 mm in both derection with wire of dia.0.63 mm fir diirs, windows and clerestory windows with hinges and necessary screws:35 mm thick shtters with ISI marked M.S prossed butt hinges bright finished of required size.Kiln seanoned selected class of hollook wood. |
| 4 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia |
| 5 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 6 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick |
| 7 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading |
| 8 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 4.0 mm thick glass panes. |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 11 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 12 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110 mm diameter |
| 13 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine sand) |
| 14 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 15 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement : 4 fine sand) |
| 16 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 24 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 25 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 26 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 27 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead. . |
| 28 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 29 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes metre |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes metre |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes metre |
| 35 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.15mm nominal bore |
| 38 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 39 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : |
| 40 | Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 |
| 41 | Add Cost Index 3% on DSR 2023 |
| 42 | Providing and fixing ISI marked stainless steel sliding door bolts conforming to IS:4992 with necessary screws etc. complete : 300x16 mm |
| 43 | Providing and fixing ISI marked stainless steel tower bolts conforming to IS:4992 with necessary screws etc. complete : 250x10 mm |
| 44 | Providing and fixing ISI marked stainless steel tower bolts conforming to IS:4992 with necessary screws etc. complete : 150x10 mm |
| 45 | Providing and fixing ISI marked stainless steel handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 46 | Providing and fixing CP Brass Swan Neck Type Pillar Cock of approved quality & make Parryware, Ethos or equivalent including necessary screws etc complete as approved by Engineer in charge. 15 mm nominal dia |
| 47 | Providing and fixing white table top wash basin make Jaquar, kohler, Hindware, Parryware or equivalent completely recessed at the back for the reception of pipes and fittings etc complete as per direction of Engineer-in-charge. |
| 48 | Providing and fixing CP Brass sleek shower with shower arm sqaure size 150 mm x 150 mm of approved quality & make Parryware, Ethos or equivalent including necessary screws etc complete as approved by Engineer in charge. 15 mm nominal dia |
| 49 | Providing and fixing CP brass soap dispenser with glass bottle of approved brand make Jaquar, kohler or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 50 | Providing and fixing C.P. brass bib cock of approved design make Jaquar, Kohler or equivalent including necessary screws etc complete as per direction of Engineer-in-charge. 15mm nominal bore |
| 51 | Providing and fixing C.P. brass two way bib cock of approved quality with wall flange make Jaquar, Kohler or equivalent etc. complete as per direction of Engineer-in-Charge. 15 mm nominal bore. |
| 52 | Providing and fixing C.P. brass Angular stop cock with wall flange of approved quality make Jaquar, kohler or equivalent etc. complete as per direction of Engineer-in-Charge. 15 mm nominal bore |
| 53 | Providing and fixing C.P. brass Single towel ring (Square) in chrome finish of approved quality make Jaquar, kohler or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 54 | Providing and fixing towel rail make Jaquar, kohler or equivalent complete with brackets fixed with CP brass screws with concealed fittings arrangement of approved quality and colour etc. complete as per direction of Engineer-in-Charge. 600 mm long towel rail |
| 55 | Providing and fixing 600x120x5 mm glass shelf of approved design make Jaquar, Ethos or equivalent, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete as per direction of Engineer-in-Charge. |
| 56 | Providing and fixing CP Brass wall mixer of approved quality & make Parryware or equivalent including necessary screws etc complete as approved by Engineer in charge. 15 mm nominal dia |
| 57 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, with flushing cistern (Size 640x345x690 mm) make Parryware, Kohler or equivalent etcetc complete as per direction of Engineer-in-charge. |
| 58 | Providing and fixing C.P. brass hand spray (Health faucet) with 1 mtr long flexible tube in chrome finish of approved quality make Jaquar, kohler or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 59 | Providing and fixing stainless steel grating of approved quality and colour etc. complete as per direction of Engineer-in-Charge .Circular type.100 mm nominal |
| 60 | Providing and fixing SS . connection pipe with SS Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 61 | Credit to work for ISI marked Aluminium sliding door bolts conforming to IS:4992 with necessary screws etc. complete : 300x16 mm |
| 62 | Credit to work for ISI marked Aluminium tower bolts conforming to IS:4992 with necessary screws etc. complete : 250x10 mm |
| 63 | Credit to work for ISI marked Aluminium tower bolts conforming to IS:4992 with necessary screws etc. complete : 150x10 mm |
| 64 | Credit to work for ISI marked Aluminium handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 65 | Credit to work for old/ unserviceable GI pipe 15 to 40 mm dia |
| 66 | Credit to work for old/ unserviceable CP Brass Bib cock/ stop cock/ Piller cock/mixture 15 mm |
| 67 | Credit to work for old/ unserviceable C.P. brass towel ring, towel rail, soap dispenser Shower etc.. |
| 68 | Credit to work for old/ unserviceable PVC water storage tank with lid |
| 69 | Credit to work for old/ unserviceable Cast iron pipe all size |
| 70 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group \\"B\\" |
| 71 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 72 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 73 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 74 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 75 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 76 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. a) Group B |
| 77 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 3 x 1.5 sq. mm |
| 78 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. b) 6 x 1.5 sq. mm |
| 79 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. c) 3 x 4 sq. mm |
| 80 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. d) 6 x 4 sq. mm |
| 81 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 82 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 83 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch |
| 84 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch |
| 85 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet |
| 86 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet |
| 87 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet |
| 88 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet |
| 89 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push |
| 90 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 91 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
| 92 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) |
| 93 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm) |
| 94 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) |
| 95 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) |
| 96 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module |
| 97 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module |
| 98 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 4 Module |
| 99 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 6 Module |
| 100 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12 Module |
| 101 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 102 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 103 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 104 | Supplying and fixing call bell / buzzer suitable for single phase, 230 volts complete as required. |
| 105 | Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS/HFFR PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required. |
| 106 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 107 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 108 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 109 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).8 way , Double door |
| 110 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way (4 + 24), Double door |
| 111 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 112 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) Double pole |
| 113 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 114 | LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim. 12 - 15 watt |
| 115 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range-5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm). 24-26 Watt |
| 116 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 45 Watt |
| 117 | Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.900mm, service value ≥ 5.1 CM/Min/Watt, air delivery 130 CM/Min (Minimum) |
| 118 | Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 119 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 120 | Supplying and fixing of 10 watt Mirror Light LED batten made up of polycarbonate making connection etc. as required of make Crompton/HAVELLS /Phillips/Bajaj. |
| 121 | Supplying and fixing of Elegant wall light with style, 8 watt as per E27 / B22 LED bulb supported diamensions - 155mm (L) × 106mm (W) × 265mm (H) approximate, Sophisticated Design – Complements modern and classic interiors, Two Stylish Finishes – Matte-nickel or black & brass, Durable Build – High-quality metal and polycarbonate construction, Easy Upkeep – E27 / B22 bulb for quick replacement making connection etc. as required of make Phillips/Havells/ Wipro/ Bajaj/ Crompton. |
| 122 | Supplying,Installation, testing and commissioning of 10 watt LED Bulk Head Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire IP-65/66 comprising of high brightness LEDs.,complete with all accessories etc. directly on ceiling/ wall, including connections etc. as required. Make Havells/Philps/ Bajaj / Crompton / Orient / Khaitan / Usha/Polycab. |
| 123 | Supplying and fixing of 200/ 250 mm sweep, PVC exhaust fan/ air ventilator suitable for single phase, 50 Hz,230 volts,AC supply in existing opening including making hole to suit the size & SF of louver/shutter including connection etcasrequiredHavells/Bajaj/Crompton/Khaitan/ Polar make |
| 124 | Supplying and fixing of 300 mm sweep, metallic exhaust fan suitable for single phase, 50 Hz,230 volts,AC supply in existing opening including making hole to suit the size & SF of louver/shutter including connection etc. as required. Bajaj/Crompton/ Havells/Khaitan/ Polar make |
| 125 | Supplying and fixing 100A rating, 415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make Havells Cat No. DHMJCFPF100 or equivalent make of Legrand/ L&T/ Siemens/ HPL etc |
| 126 | Supplying and fixing Modular Electric Chimney 90 CM, T-shape / Curve shape, (LxWxH) (90 cm x 45.5 cm x 46.5 cm) approx, Rated Noise Level : 48 dB or less, Rated Power : 135 W, Powerful Suction with BLDC Motor, 1700 m³/h or more suction for powerful performance, gesture/ motion sensor control / button control, Fetterless with heat auto clean function for efficient & effortless cleaning, minimum 5 Years comprehensive product warranty & 10-15 Years warranty on Motors, Intuitive & colourful display for easy understanding, including cutting wall and exhuast pipe etc complete with connection wire etc. easy to be fixed on the existing wall including making good the damages, installation with Flexible Stainless Steel / aluminium non-insulated Chimney Pipe with Steel Cowl, chimney outer cowl with Mesh & Brackets – Heavy Duty Kitchen Exhaust Duct Hose Kit (4 to 8 Inch, as per suitable head size, 10 Feet minimum length) with all accessories as required and Shock Safe Plug, making connections etc. as required, Proxima 90 Chimney, T Shape, Cat No. GHKCNBWK0 or make of Havells or equivalent make of LG/ IFB/ Elica/ Faber/ Midea/ Hindware/ Bosch/ Livpure etc. |
| 127 | Supplying and fixing 25 Ltrs Capacity, 2 KW, 5 Star rating power saving water heater (Gyser) with titanium-enriched glass-lined inner tank and a sacrificial magnesium anode rod, High Density PUF insulation etc easy to be fixed on the existing wall including hose pipe with fastnuts & rubber washers and Shock Safe Plug, making connections etc. as required, Cat No. GHWVBPDMEW25 make Havells or equivalent make of Racold/ AO Smith/ Usha/ Crompton/ Bajaj etc. |
| 128 | Supplying and fixing 10/15 Ltrs Capacity, 5 Star rating power saving water heater (Gyser) with ferroglass / titanium-enriched glass-lined inner tank and a incoloy glass coated heating element / sacrificial magnesium / heavy duty protective anode rod, High Density PUF insulation etc easy to be fixed on the existing wall including hose pipe with fastnuts & rubber washers and Shock Safe Plug, making good the damages and water tight connection etc. as required, Cat No. GHWVBPDMEW25 make Havells or equivalent make of Racold/ AO Smith/ Usha/ Crompton/ Bajaj etc. |
| 129 | Supplying and fixing 6 Ltrs Capacity, 4/5 Star rating power saving instant water heater (Gyser) with ferroglass / titanium-enriched glass-lined inner tank and a incoloy glass coated heating element / sacrificial magnesium / heavy duty protective anode rod, High Density PUF insulation etc easy to be fixed on the existing wall including hose pipe with fastnuts & rubber washers and Shock Safe Plug, making good the damages and water tight connection etc. as required, Cat No. GHWVPUUMDW06 make Havells or equivalent make of Racold/ AO Smith/ Usha/ Crompton/ Bajaj etc. |
| 130 | SITC of outdoor Bollard luminaries having dia cast aluminum housing, opal / acrylic diffuser, powder coated with in built LED / LED lamp of 9 – 11W of height 800mm to 1000mm, suitable for 220V AC, IP 65, colour temperature 3000K – 6500K i/c making of suitable RCC foundation of 1 : 3 : 6 (1 cement : 3 Coarse : 6 graded stone) aggregate 40mm. (NS) with necessary Nuts & Bolt i/c connection, testing, commissioning complete as per sample approved etc. as reqd. (Make : Luster / Hi-lite / Twinkle lite / Twinkle Lux - Max / Jaquar /Havells /Wipro/Philips) |
| 131 | S & F of 1 Watt LED Gate side Globe Light VILLA SOLAR LED GATE LIGHT IP65 LED Solar pillar light with built-in Solar panel, LED Light and Lithium battery with charge controller i/c all accessories complete with connection etc. as required. Havells Model No. VILLA 1 W 5700 K Solar Gate Light or equivalent make of Philips / Luster / Hi-lite / Twinkle lite / Twinkle Lux - Max / Jaquar Bajaj /Wipro/ Surya) |
| 132 | Supplying & laying of 2x6 sqmm aluminium conductor power Cables, Solid Aluminum Conductor XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured (Aluminium wire for single core & balance Aluminium strip, Galvanised wire for cables upto 2Cx 6 sq. mm & balance all galvanised steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments in conduit direct in ground etc as per required. |
| 133 | Supplying and fixing 20 / 25 / 32 A DP ‘C’ MINI MCB suitable for inductive load in the existing Switch board complete with connections, testing and commissioning etc. as required.( for Geyser and AC ) |
| 134 | Dismentling of existing electrical circuit and damaged fitments with all accessories. Please Enable Macros to View BoQ information |
