|
| 1 | DSR’2023, Item No.12.45.3Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant board |
| 2 | DSR’2023, Item No.13.80Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 3 | DSR’2023, Item No.13.81.1Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 4 | DSR’2023, Item No.15.57Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. |
| 5 | DSR’2023, Item No.13.99.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 6 | DSR’2023, Item No.13.41.1Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 7 | Market rateDistempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and without water thinnable priming coat) |
| 8 | DSR’2023, Item No.18.53.1Providing and fixing of trap doors of size (1400x850) in position aluminium acess panel with 12.5mm MR (Moisture Resistance) type gypsum board for the trap door and all other arrangement to fixing at site including all necessary fittings, transportation, labour, T&P etc all complete. |
| 9 | DSR’2023, Item No.17.28.2.1Providing and fixing of trap doors of size (400x600) in position aluminium acess panel with 12.5mm MR (Moisture Resistance) type gypsum board for the trap door and all other arrangement to fixing at site including all necessary fittings, transportation, labour, T&P etc all complete. |
| 10 | DSR’2023, Item No.17.33Providing and fixing of trap doors of size (400x800) in position aluminium acess panel with 12.5mm MR (Moisture Resistance) type gypsum board for the trap door and all other arrangement to fixing at site including all necessary fittings, transportation, labour, T&P etc all complete. |
| 11 | Market rateSupply of 36W 2’x2’ LED recess light with CCT of 5700K, system efficacy of min. 110Lm/W, CRI>80% Make: Phillips, Crompton, Bajaj, Havells, Wipro |
| 12 | Market rateSupply of 15W LED Round recess light (Cut out dia-155mm) with die-cast Aluminium body with CCT of 5700K , system efficacy of min. (COB type)110Lm/W, CRI>80% Make: Phillips, Crompton, Bajaj, Havells, Wipro Please Enable Macros to View BoQ information |
