|
| 1 | S/I/T/C of Barrier Gate 4 meter straight arm, Electronic control board and power supply, Corrosion resistant cabinet. opening/ closing Time 3 sec,100% Duty Cycle. MTBF -5 million Life Cycle with push button, Boom stand and Remote control• Manual release.,(As per Complete Item No. 1 of the DNIT) |
| 2 | SITC of Vehicle Detector with Self tuning range: 20-1000 μHMake :- Parknsecure/ Nortek / Intelliparks/ P&F/ Parklio only., (As per Complete Item No. 2 of the DNIT) |
| 3 | SITC of Retro reflective sensor with 2 m fixed cableMake :- Parknsecure/ Nortek / Intelliparks/ P&F/ Parklio only., (As per Complete Item No. 3 of the DNIT) |
| 4 | DSR item no.26.1.1Online UPS - Input supply: Single Phase, Output Supply : Single Phase Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input,(As per Complete Item No. 4 of the DNIT) |
| 5 | 2 KVA |
| 6 | SITC of Long Range RFID Readers 865-868 MHZ ,6 Mtr. Range, Support protocol: ISO‐180006B/6C, The Antennas for RFID readers are engineered for specific frequencies including Active 2.45GHz,(As per Complete Item No. 5 of the DNIT) |
| 7 | SITC of RFID Controller -TCP/IP - This Controller supports any wiegand -output reader, including HID Prox, I Class, and Xceed ID Multi-Technology.,(As per Complete Item No. 6 of the DNIT) |
| 8 | SITC of VAM Software -Designed to cater to the needs of facilities where parking is allocated to only. Make :- Parknsecure/ Zebra/ Tagmaster/ FEIG/ Parklioonly.,(As per Complete Item No. 7 of the DNIT) |
| 9 | SITC of Passive Windshield Tags (with Logo) Operating frequencies EU: 865 – 868 MHz US: 902 – 928 MHz, Tamper proof A tamper-evident option with strategically placed slits in the label, Reading range EU: Up to 5 meters* (16 ft.) and US: Up to 6 meters* (20 ft.),(As per Complete Item No. 8 of the DNIT) |
| 10 | SITC of MS Mounting Pole 2.5 meter long, 75mm dia. The pole is to be grounded with the cement concreate mixture after excavation of earth., (As per Complete Item No. 9 of the DNIT) |
| 11 | S/I/T/C of PORTABLE CABIN as per belowSpecification.Pre fabrication porta cabin of size approx. 2.5 mtr. X 2 mtr. X 3 mtr. the cabin shall have the following specifications:Wall Panel: - 50mm thick Wall PUF Panels manufacture on Continuous line machine with Pre painted galvanized (PPGI) Sheet. PUF density 40 + 2 kg 1 m3 with tongue and groove.,(As per Complete Item No. 10 of the DNIT) |
| 12 | SITC of Road hump / speed breakers are made of Carbon Black Mixed plastic, with additive of LDPE for reinforcement and UV resistant coloring agent or pure epdm, Glass elements/ reflectors.,(As per Complete Item No. 11 of the DNIT) |
| 13 | DSR Item no. 42.2PC System:- Supply Installation Testing Commissioning of Client PC System comprising of PC Hardware with minimum11th Gen Intel® I7 processor CPU E5-2640 x64 (or better), compatible with dualandquadcoreprocessorsminimum3.1Ghzand8GBorhigher RAM, (As per Complete Item No. 12 of the DNIT) |
| 14 | DSR item No.39.1.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table., (As per Complete Item No. 13 of the DNIT) |
| 15 | Supply & laying of PVC copper wire 2.5 mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc., (As per Complete Item No. 14 of the DNIT) |
| 16 | DSR Item No. 39.18.1 Supplying, drawing, Installation, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH,(As per Complete Item No. 15 of the DNIT) |
| 17 | 1 Run of cable |
| 18 | DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 19 | 25 mm |
| 20 | 32 mm |
| 21 | DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator). |
| 22 | 4 way (4 + 12) Double door |
| 23 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Single pole |
| 25 | Double pole |
| 26 | Triple pole and neutral |
| 27 | DSR Item No. 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 28 | DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, (As per Complete Item No. 20 of the DNIT) |
| 29 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 30 | DSR item no.8.9.5 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, (As per Complete Item No. 21 of the DNIT) |
| 31 | 18- 22 watt |
| 32 | Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness., (As per Complete Item No. 22 of the DNIT) |
| 33 | Size 10 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable |
| 34 | Supply and laying of XLPE insulated PVC sheathed Aluminum conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/Hume/DWC/ Metal pipe. The job include the cost of making connections with suitable size of Aluminium Lugs/ thimbles,(As per Complete Item No. 23 of the DNIT) |
| 35 | Size 10 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable |
| 36 | Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 Nos. of pull cord switches, one for oscillation and one for speed regulation.,(As per Complete Item No. 24 of the DNIT) |
| 37 | DSR Item No. 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 38 | Group A |
| 39 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 40 | 3 x 1.5 sq. mm |
| 41 | 3 x 2.5 sq. mm |
| 42 | DSR Item No.1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 43 | DSR Item No.1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 44 | Providing AMC complete boom barrier system main controller and UPS. Under the AMC the supplier shall provide comprehensive Mtc. service of the system including the spares for two years and there shall be no hidden cost. Preventive Mtc (As per Complete Item No. 29 of the DNIT) |
| 45 | 2nd year(5%oftotalamountofestimatei.e.Rs. 20,58,226/-) |
| 46 | 3rd year(addition of 5%in2nd year) |
| 47 | 4th year(addition of5%in3rd year) |
| 48 | 5th year(additionof5%in4th year) Please Enable Macros to View BoQ information |
