|
| 1 | Earth work in Hard soil with in 50m initial lead & 1.5m Initial lift Inclunding Rough dressing & Brecking clods etc complete |
| 2 | Sand filling in foundation with well watered & rammed with all cost of carriage & royality etc. comlete. |
| 3 | C.C (1:3:6) with using 4cm size C.B.G metal with all cost of carriage & royality. |
| 4 | 2.5 cm Damp Proof Course CC (1:2:4) using 12 mm hard broken granite chips of approved quality |
| 5 | Filling in f&p with ewxcavated materialincluding water (Rate as 2/3 rd as of E/w in Excav ) |
| 6 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, (Column Bases & Pedestal) |
| 7 | Plinth Bend |
| 8 | For beam and column |
| 9 | Lintel |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C. |
| 13 | Fly ash brick masonry in CM (1:6) for f&p including necessary scaffolding ,raking out joints, curring etc complete as per specfication and direction of the engineer in-charge |
| 14 | Fly ash brick masonry in CM (1:6) for super structure including necessary scaffolding ,raking out joints, curring etc complete as per specfication and direction of the engineer in-charge |
| 15 | 6 mm Thick Plaster on RCC work |
| 16 | 16 MM THICK CP(1:6) over brick masonary work incuding necessary scaffolding,currng ctc complete (inside) |
| 17 | 12 MM THICK CP(1:6) over brick masonary work incuding necessary scaffolding,currng ctc complete |
| 18 | 2.5 cm thick grading plaster (1:4),finished smooth over roof slab after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete |
| 19 | Fixing tile (vitrified ) on floor 20mm thick bed in cm(1:4) jointed with neat cement slury mixed ith pigment to match the shades |
| 20 | Fixing tile (vitrified ) in wall in 12mm thick bed in cm(1:3) jointed with neat cement slury mixed ith pigment to match the shades |
| 21 | Wall Painting one coat to wall with Primer approved shade on new work to give an even shade |
| 22 | Distemper 2 coat with any approved shed over the interiorsurface wall using distemper |
| 23 | Finishing walls with weather proofing paint 2 Coats by means of brush to outer surface of walls |
| 24 | Supplying, fitting and fixing steel Angle iron door and windows as per approved design and drawing including all cost of materials and labour etc complete as per direction of Engineer in charge. |
| 25 | Painting two coat enamail paint to iron work |
| 26 | Supplying,fitting and fixing of Stainless steel Please Enable Macros to View BoQ information |
