|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. DSR 1.10.3 |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. DSR 1.11 |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1x1.5 sqmm.for Inverter D.S.R 1.17.1 |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. DSR 1.31 |
| 5 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, and 1 Nos. 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required. (Computer Point) D.S.R 1.56 +1.32 |
| 6 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR 1.32 |
| 7 | S/F suitable size GI box with modular plate and cover in front on surface or in recess , including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" Curve including connections, painting etc. as required. DSR 1.57 |
| 8 | S&F of 100 Amp. four pole change over switch on angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. MR |
| 9 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2X 1.5sq.mm+1X1.5sq. mm earth wire D.S.R 1.14.1 |
| 10 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 |
| 11 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR 1.14.3 |
| 12 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire DSR 1.14.4 |
| 13 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 10 sq. mm earth wire DSR 1.14.5 |
| 14 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 16 sq. mm earth wire DSR 1.14.6 |
| 15 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire DSR 1.14.10 |
| 16 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required4 X 16 sq. mm + 2 X 6 sq. mm earth wire DSR 1.14.11 |
| 17 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door DSR 2.3.3 |
| 18 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door DSR 2.4.1 |
| 19 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole DSR 2.10.1 |
| 20 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Double pole DSR 2.10.3 |
| 21 | Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps DSR 2.14.2 |
| 22 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR 2.11 |
| 23 | Supplying and fixing following rating, four pole, (threephase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA inthe existing MCB DB complete with connections,testing and commissioning etc. as required. 40 A DSR 2.15.2 |
| 24 | Supplying and fixing following rating, four pole, (threephase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA inthe existing MCB DB complete with connections,testing and commissioning etc. as required. 63 A DSR 2.15.3 |
| 25 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. Incoming : 400 Amp MCCB , O/Going : 200 Amp. MCCB-2 Nos., 100 Amp. MCCB-1 No, & 63 Amp. MCCB-1 No. SOR 20.1.3 (a) |
| 26 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.. DSR 5.2 |
| 27 | S/L of 25mm x 5mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required DSR 5.9 |
| 28 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. DSR 1.38 |
| 29 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing DSR Civil 10.18 |
| 30 | SITC of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor notless than 0.9, Service Value (CM/M/W) minimum 6.00, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. D.S.R 9.2.3 |
| 31 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep DSR 1.50.1 |
| 32 | Supplying, Installation, Testing & Commissioning of18-22 watt LED surface mounted Batten light (System lumen efficacy ≥105 <120lm/Watt). rating and Fixture shall be confirming to relevant BIS standards. Complete in all respect. DSR 8.9.5 |
| 33 | Supplying, Installation, Testing & Commissioning of18 watt LED Down lighter (SMD Type) (System lumenefficacy ≥120<135lm/Watt) rating and Fixture shall be confirming to relevant BIS standards. Complete in all respect. DSR 8.2.4 |
| 34 | Supplying, Installation, Testing & Commissioning ofPanel light 2x2 ft. 36 Watt (System lumen efficacy ≥120 <135 lm/Watt) Powder Coated CRCA Sheet Body (Thickness >0.50 mm) rating and Fixture shall be confirming to relevant BIS standards. Complete in all respect. DSR 8.7.10 |
| 35 | Supplying, installation, Testing & Commissioningof 90 Watt(System lumen efficacy ≥120 <135 lm/Watt) Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV. confirming to relevant BIS standards. Complete in all respect. DSR 8.13.14 |
| 36 | S/L of 240 Sq mm 3-1/2 Core Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level as directed by the Engineer-Incharge, complete in all respect. including Lugs and Glands SOR 20.1/20.1.18 |
| 37 | S/L of 150 Sq mm 3-1/2 Core Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level as directed by the Engineer-Incharge, complete in all respect. including Lugs and Glands SOR 20.1/20.1.16 |
| 38 | Supply of Fresh air Fan 300 mm 1-phase 1400 rpm, 230/250 Volts, 50 Hz RA |
| 39 | Supply and fixing of single light wall bracket with opal glasspaint finishing up to 6 watt LED complete in all respect. RA |
| 40 | Supply and Fixing of LED Bulb 9 Watt lumen 810 to 945 complete in all respect. RA |
| 41 | Supply and Fixing of Bulkhead fitting upto 10 Watt lumen 1000 complete in all respect. CAT-AA SOR 23.11 |
| 42 | Supply and Fixing of Lamp Base LED Mirror Light 11 Watt lumen 800 complete in all respect. RA |
| 43 | Supply and Installation of split type A.C 5 Star invertor Type Daikin/Voltas/ Equivalents 1.5 Ton Capacity MR |
| 44 | 4 KVA Voltage Stablizer for Air Conditioner Upto 1.5TR (130 - 300 Range) Copper Winding. MR |
| 45 | Supply of Out Door Unit stand for split type A.C MR |
| 46 | SITC of suction/Discharge Copper pipe line in split A.C unit 1.5 ton capacity including brazing,nitrile rubber insulation 9mm thick class o etc comlete 1/4\\" (6.40mm) and 1/2\\" (12.70) MR |
| 47 | S/I of heavy duty CPVC 20mm/25mm OD pipe for condensed water drain with clipping accessories complete. MR |
| 48 | 2.5sqmm 3 core Round cable for A.c Connecting indoor to unit to Stablizer/power point. MR |
| 49 | 2.5sqmm 4 core Round cable for A.c Connecting indoor/Outdoor MR |
| 50 | Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having followingspecifications, type of lens and features etc :-1) Signal System: PAL/NTSC, Signal to Noise Ratio:>50 dB, Camera should display Camera title, Date & Time in live & recorded video, 2), Image Sensor: 1/2.8\\", Compression (Minimum):-Video:- H.265, WDR (120db or more), 2MP (@ 25/30fps@1080P (1920×1080)) IP IR DomeCamera with 2.8/ 3.6mm fixed lens complete in all respects. DSR 40.1.1 |
| 51 | Supplying Installation Testing and Commissioning of2MP Fixed Lens IP IR Outdoor Bullet Camera havingfollowing specifications and features etc :-1) Signal System: PAL/NTSC, Signal to Noise Ratio:>50 dB, Camera should display Camera title, Date & Time in live & recorded video, 2), Image Sensor: 1/2.8\\", Compression (Minimum):-Video:- H.265, WDR (120db or more), 2MP @ 25/30fps@1080P (1920×1080) Outdoor BulletCamera with 2.8/ 3.6mm fixed lens complete in all respects. DSR 40.2.1 |
| 52 | Supplying Installation Testing and Commissioning of08 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9, 2nd screen: 1/4/8/9 Network Video Recorder (NVR)with camera licenses to record for all channels having specifications and features etc as mentioned below :Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels, NVR to record per NVR NVR should support H.265 or better, H.264, MJPEG, MPEG4 support, Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk, Intelligent auto power on when power resumes after power outage. Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot,.Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 complete in all respects. DSR 40.10.1 |
| 53 | Supplying, Installation, Testing and Commissioning4TB (Terabytes) Serveillance grade Hard Disk withupto 256MB/s Transfer Rate, 256 MB Cache, 7200RPM Disk Speed, 3.5 inch form factor, SATAInterface, BSMI, ICES-003/NNB-003, CE, FCC, KC,Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, ULCertifications. DSR 40.12.1 |
| 54 | SITC of 22 Inch LED Monitor Full HD with HDMI Input MR |
| 55 | Supplying, drawing, Installation, Testing andcommissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. complete as required.( for camera and Lan work both) DSR 39.17.1 |
| 56 | Supplying and fixing of 25 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required DSR 1.21.2 |
| 57 | Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required DSR 39.14 |
| 58 | Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor NetworkSwitch having features and specifications etc asmentioned here under: Minimum 8 X RJ-45 GigabitEthernet Ports and additional 2 X 1G SFP Ports withnon-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table.8 port Layer 2 Non-PoE Network Switch DSR 39.1.2 |
| 59 | Supplying and fixing of 9U Rack Wall Mount having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD)Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. DSR 39.23.2 Please Enable Macros to View BoQ information |
