Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 2 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 3 | Providing Cement concrete (1:3:6) using 40mm size clean hard granite crusher metal of approved quality from approved quarry including hoisting, lowering, laying concrete in layer not exceeding 15cm thick and compacting to the required thickness and curing etc. complete including cost, conveyance royalty and taxes of all materials and cost of labour ,T&P and other charges of machineries etc. required for the work as per specification & direction of the Engineer-in-charge. |
| 4 | Providing Single under-reamed Piles foundation of 300 mm dia. 6.00mtr long with R.C.C M-20 using 12 mm size black hard granite (Crusher Broken) stone chips including cost of boring , but excluding cost of M.S rods /Tor steels and labour charges for cutting bending and binding of steel and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 5 | Providing Single under-reamed Piles foundation of 250 mm dia. 3.00mtr long with R.C.C M-20 using 12 mm size black hard granite (Crusher Broken) stone chips including cost of boring , but excluding cost of M.S rods /Tor steels and labour charges for cutting bending and binding of steel and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 6 | Providing Single under-reamed Piles foundation of 250 mm dia. 2.5mtr long with R.C.C M-20 using 12 mm size black hard granite (Crusher Broken) stone chips including cost of boring , but excluding cost of M.S rods /Tor steels and labour charges for cutting bending and binding of steel and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 7 | R.C.C. work of M-25 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. ( Column Base/ Pile Cap) |
| 8 | Grade Beam |
| 9 | RCC Column |
| 10 | Lintel |
| 11 | Chajja |
| 12 | RCC Roof Slab |
| 13 | R.C.C. work M-20 grade with 20mm and down grade C.B chips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 days after mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete and compacting with vibrators, curing for 28 days with smooth centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties & T&P required for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge. ( Column Base/ Pile Cap) |
| 14 | Grade Beam |
| 15 | RCC Column |
| 16 | Copping |
| 17 | Bed, Wall, Cover |
| 18 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 20 | Cement concrete (1:2:4) using 12 mm(½\\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 21 | 12 mm (½\\") thick cement plaster (1 : 4) with neat cement punning finished smooth to outside surface of brick walls after raking out joints including watering and curing etc complete including cost , conveyance , royality and taxes of all materials , cost of all labour and T&P required for the work etc complete as directed by the Engineer - in - charge . |
| 22 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 23 | Fly Ash brick masonry in cement mortar (1:4) in Superstructure using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 24 | 12mm(1/2'') thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour T&P directed for the work etc. complete as directed by the Engineer - in - charge . |
| 25 | 16 mm (5/8\\") thick cement plaster in Cement Mortar (1:6) finished smooth to inside rough surface of brick walls after raking out joints scrapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labour T&P directed for the work etc. complete as directed by the Engineer - in - charge |
| 26 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&P directed for the work etc. complete as per directed by the Engineer-in-charge. |
| 27 | 2.5 cm(1\\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 28 | Fixing of Chequered concrete tiles on floor of Size 60cmx60cm/40cmx40cm having thickness 16 mm on 25mm thick bed of Cement mortar 1:4 (1 Cement: 4 sand) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones (For new work) with cost of all labour, labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 29 | Providing laying and fixing 80mm thick factory made cement concrete interlocking paver Blocks of M30 grade made by machine with strong vibratory completion of approved size and shape laid in colour and pattern over 50mm thick compacted bed of course sand filling the joints with fine sand etc complete including cost conveyance, royalty, taxes of all materials and T & P required for the work including cost of paint etc all complete as directed by the Engineer-in-charge. |
| 30 | Providing and laying 600 mm x 600 mm (Printed grade) Vitrified Floor Tiles confirming to IS: 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. |
| 31 | Supplying, fitting & fixing of Vitrined colour printed series steps of size 600mm 600mm of a mortar (1:3) including the cost of all materials, cost of all labour, conveyance, taxes, royalbes, mm of approved make confirming to 15:13785 jald on 12 mm thick cement les tiles in dadoes, skirting and riserk of loading, unloading, su Engineer in-Charge ing sundries, watering and curing, TAP, complete as per the direction of the |
| 32 | Fixing of Granite tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles . |
| 33 | Supplying, fitting & fixing in position well dressed and seasoned sal wood work in choukath of approved size wrought and put up in door frame including two coat of coaltaring to wall and lintel side faces, in all floors including cost, conveyance, taxes of all materials, cost of all labour, labour cess, T&P etc, complete as directed by Engineer-in-Charge |
| 34 | Providing and fixing ISI marked 35 mm thick Flush Door shutter confirming to 15:2202 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters of approved design including cost of all door fittings and fixtures etc complete |
| 35 | Supplying of M.S grill and gate manufactured from standard rolled steel angle with corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 36 | Supplying Fitting and Fixing of Un-Plasicised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD ) Three Track- Three panel sliding window-60 series duly manufactured using UPVC reinforced profile of 108mm x 45 mm x 2.5 mm for outer frames and windows sash of 39 mm x 58 mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & wlded through fusion welding the window frame shall be fitted with 6mm thick clear tougherned glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large Couple at the site using anchor fasterners sliicon rubber sealant easy glazing/ deglazing at site etc, including cost and conveyance of all materials accessories labour charges materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standard. complete as per specification and direction of the Engineer-in-charge . |
| 37 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 38 | Fitting and fixing of 6mm thick glass inlcuding the cost of all materials and labour required for the work etc complete as directed by the Engineer-in-charge. |
| 39 | Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0\\" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0\\" x 2'-0\\" using 12.5 mm thick gypsum board of size 6'x4'suspended from ceilling etc complete as directed by the Engineer-in-charge |
| 40 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 41 | Providing Weather coat painting two coats ovar a coat of primer to out side wall with any approved shade of including cost conveyance, taxes of all materials and T & P required for the work including cost of paint etc all complete as directed by the Engineer-in-charge. |
| 42 | Providing and applying wall painting two coats with plastic emulsion paint over a coat of primer of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 43 | Painting two coats any approved shade to wood or Iron works over a coat of priming including sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 44 | Providing and applying post construction of Antitermite treatment by drilling 12mm dia holes at a distance of 30cm @ junction of wall and floor about 300mm aprt deep enough to each the soil below and chemical emulsion ( PREMISE, IMIDACHLOPRIED 30.5SC of BAYER MAKE mixed with 475 ltr water) pumped these holes to soak the soil @ 1 Ltr solution of each holes as per manufactures specification and the holes should be plugged with filling materials including cost of all materials labour charges conveyance and all taxes and hiring charges of machineries as per direction of Engineer in charge |
| 45 | ( E.I WORK) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.Group-A. L.P.-10 F.P.- C.B.- |
| 46 | Group-B. L.P.-15 F.P.-4 C.B.- |
| 47 | Group-C L.P.-10 F.P.-3 C.B.-1 |
| 48 | Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) .Group-A. |
| 49 | On Existing board. |
| 50 | Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge.a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring |
| 51 | b)2x1.5mm2(1.19.2.SOR-17) loop wiring |
| 52 | c)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) |
| 53 | d)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) |
| 54 | e)2x6mm2+ 1x2.5mm2(1.8.4.SOR-17) |
| 55 | S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make. |
| 56 | S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose. |
| 57 | S/F.of 9W/10Wt.LED lamps of Havels/Crompton make or Equivalent |
| 58 | S/F of 1200mm sweep energy efficient 5 star rated BLDC Ceiling fan (Make- USHA(Technix)/ Crompton( Energeon Riviera) Regulator or equivalent model of Havells/ Bajaj or other reputed make) with regulator compatible as per direction of Engineer-in-charge. |
| 59 | S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj (Bahar) /Crompton (Drift Air) make & connection as per direction of Engineer-in-charge. |
| 60 | Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required. |
| 61 | S/F of 1x15W 5700K surface /Recessceling LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(TRIM LED/ ENDURA NEO DL SURFACE/INTEGRA NEO SURFACE) /INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.(Basement-64) |
| 62 | S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent make)complete with connection as per the direction of Engineer-in-Charge. |
| 63 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 01 No.s of 6 pin 15/16A modular socket outlet and 15/16 A modular switch & and 01 no. of 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.Modular switches make-Anchor/ Legrand /Roma) (5+15 A switch socket board) |
| 64 | Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.(2x15A inverter point) |
| 65 | S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/ Legrand make) connection, painting etc as required.A.C |
| 66 | Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge. |
| 67 | S/F of 1x60W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Philips/Havells make(ENDURA PLUS )/Crompton ORION NEO including all accessories,G.I bracket and connection.including GI bracket. |
| 68 | S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.(terrace-6nos.) |
| 69 | Supplying and fixing of 4 Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 3W 4 Modular foot light as a Bed lamp |
| 70 | S/F of of 63Amp DP Main switch Panel size 15\\"×12\\"×10\\" with powder coat made out of 18SWG CR sheet with designing with (i)63A, DP MCB C- Series Legrand / Hager / L&T Make. (II)DP cu bus bar (iii)LED Indicator(iv)63A kitkat fuse |
| 71 | Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required. |
| 72 | S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)(50mtr for street light) |
| 73 | P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20) |
| 74 | S/F of (4+12) way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP MCB ,12x(6-32Amp) SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge. |
| 75 | S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge(1 for panel ). |
| 76 | Supply and fixing of Metering Unit |
| 77 | Service Connection Charges |
| 78 | Supply of 1.5 Ton 3 star BEE rating 2024 rated split Air conditioners of make (Carrier/Blue Star/LG make).or equivalent make. |
| 79 | Supply of 2 Ton 3 star BEE rating 2024 rated split Air conditioners of make (Carrier/Blue Star/LG make).or equivalent make. |
| 80 | Installation and fixing of AC machine |
| 81 | 5KVA,15Amp voltage Stabilizer of voltage range 90 V to 300V,Digital wall mounted (Model No VWR 500/VBG 500) of V-guard/Shakti/Luminous make |
| 82 | S/F of MS outdoor stand |
| 83 | Supply, Instalaiton, testing and commission of 11/8\\" Dia SOFT COPPER REFRIGERANT PIPING OF 18 swg insulated with 19mm thick nitrle rubber tubes as insulation material. |
| 84 | Supply, Instalaiton, testing and commission of 5/8\\" Dia SOFT COPPER REFRIGERANT PIPING OF 18 swg insulated with 19mm thick nitrle rubber tubes as insulation material. |
| 85 | S/F of double battery of 150AH with 2KVA Inverter of Make Luminous/Exide/Sfsonic including all accessories and connection as per direction of Engineer-in-charge.(grnd &1st floor) |
| 86 | Supply of double battery inverter trolly of PVC ( Reputed make as per the direction of EIC) |
| 87 | S/F of 15Ltr Geyser of Bajaj (Bajaj/AO smith/Havells/ Shakti/ Majesty-make) including fixing on wall and connecting with water inlet & outlet complete with all accessories and connection as per Direction of Engineer-in-Charge. |
| 88 | ( P.H. WORK ) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C- PVC Pipe |
| 89 | 25mm dia C- PVC Pipe |
| 90 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 32mm dia PVC Pipe |
| 91 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 92 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 93 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 94 | 20mm dia CP consealed stop cock(FLR-ABR-5083N Jaquar make) |
| 95 | 15mm dia CP Pillar cok (CON-CHR-021KN) |
| 96 | Sink cock-jaguar cat no.FLR-CHR-5347N |
| 97 | 25mm dia brass full way valve (Shakti make) |
| 98 | 32mm dia brass full way valve (Shakti make) |
| 99 | 15mm dia CP Health faucet (ALD-MCH-573 Jaquar make) |
| 100 | 15mm dia CP revolving shower With shower arm(Jaquar)OHS-CHR-1985+SHA-CHR-477 |
| 101 | 15mm CP Extension piece |
| 102 | 125mm CP grating |
| 103 | 15mm size C.P. flange |
| 104 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank (roof on 1st floor) |
| 105 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 106 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 107 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 108 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 109 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 110 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 111 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 112 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 113 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 114 | 110mm U-PVC Plain cross tee(Ori Plast/Finolex/Supreme Make) |
| 115 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 116 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 117 | 110mm dia PVC SWR Clamp/Clip. |
| 118 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain |
| 119 | Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.550mmx440 mm size wash hand basin With porcelain pedestal (Parryware/Hindware/Cera) |
| 120 | Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge.600x450x250 mm stainless steel kitchen sink with drain board-glossy-IS:13983 - 1994 (Jayna make) |
| 121 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail |
| 122 | CP towel Ring |
| 123 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 124 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 125 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge.250mm to 375mm thick wall |
| 126 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 127 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 128 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 129 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 130 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 131 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge Common & Attached Toilet- 2x1.30mx 2.13mX0.15m |
| 132 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge ) Common & Attached Toilet- 2x 1.30mx 2.13m |
| 133 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 134 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx30cm |
| 135 | Supplying all materials, labour, T&P and providing Granite Plate , treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge |
| 136 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.G.Floor |
| 137 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 138 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 139 | Ext. P.H. Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge (110mm dia P.V.C. pipe) |
| 140 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.(Construction 1 nos 20 users RCC Septic tank) |
| 141 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge. |
| 142 | - do - with addl. Depth of 1.5 m |
| 143 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department. |
| 144 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 145 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 146 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 147 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 148 | For RCC wall |
| 149 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 150 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 151 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 152 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 100mx100mx100m as per P.H.D.specification and direction of the E.I.C. |
| 153 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 154 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. (110mm diameter U-PVC SWR pipe |
| 155 | 110mm dia U-PVC Plain shoe bend |
| 156 | 110mm dia U-PVC Cowl |
| 157 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 158 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore(00 mtr to 45mtr ) |
| 159 | 45 mtr to 150mtr |
| 160 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes(00 mtr to 30 mtrs 1x30.00mtr each=30.00mtr |
| 161 | 30 mtr to 60mtr 1x15.00mtr each=15.00mtr |
| 162 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.(200mm dia PVC (sch-80) pipe 2x46.00mtr each=92.00mtr) |
| 163 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below first level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing . |
| 164 | Cost of Cement |
| 165 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge(By DTH Rig ) |
| 166 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of first Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 167 | Supplying all materials, labour, T&P and providing, fitting and fixing vertical submersible pump to run on 3 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, etc all complete as per direction of the Engineer in charge (Texmo/ KSB/Kirloskar make)2 H.P. three phase 3 stage head -60 M, with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) vertical submersible pump |
| 168 | DOL Control panel |
| 169 | 40mm dia steel short piece |
| 170 | Well cap |
| 171 | 50mm size CI bracket |
| 172 | 2.50sqmm flat cable |
| 173 | 20mm dia rigid UPVC pipes |
| 174 | Torchain rope with cover 5 mm ARK |
| 175 | Labour charges for lowering including transportation |
| 176 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(32mm HDPE pipes (Finolex/Supreme make) wih 10 kg/cm2) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
