|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres |
| 3 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 6 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 7 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
| 10 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form forVertical and horizontal fins individually or forming box louvers band, facias and eaves boards |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mm |
| 16 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 500x500 mm |
| 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby redArea of slab over 0.50 sqm |
| 18 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 20 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 23 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile CFixing with adjustable lugs with split end tail to each jamb |
| 24 | Fixing flush door shutters of 40mm thickness made of with 19mm Green Ply finished with Decorative Laminate on both the faces with all necessary fittings etc, complete as directed by department. |
| 25 | Providing, fitting and fixing Decorative Partition Wall of Size 2.14x 2.00x0.16 made of green ply board, Vinear, Etching Glass fitted with all fittings, complete in all respect as specified and directed by the Department . |
| 26 | Providing erecting cutting fitting and fixing of laminated finished executive table (size 1500mm x 850mm x 750mm) to be made with 19 mm thick green marine plywood for frame structure with table top to be 40 mm thick and pasting of 1.5 mm thick decorative laminated sheet on over ply frame structure in both surfaces of the ply including providing and fixing of drawer channel, modular L-hinge, cupboard lock, magnate catcher, tower bolt, with pasting tape, fevicol adhesive, nails, screws etc., the work is complete with all necessary hardware materials and labour as per directed by the concern department. |
| 27 | Supplying,fitting and fixing of 12mm thick toughened glass for door and fixed glass for door and fixed glass with overhead panel (size 2.40mx1.20m) along with GEZE floor spring, GEZE handle 300mm patch floor locks,connecting patch etc.complete in all levels as specified and directed by the Department. |
| 28 | Providing erecting cutting and fixing of 420 mm depth free standing file cabinat/rack with laminated finished, erected/making to be made with 19 mm thick Greenply Plywood on all frame structure and required partition with self member as per tequired height with providing fixing of edge hinding in all plywood edges cultting and pasting with fixing for 1.5 mm thick decorative laminated sheet in both side of ply surface inluding all linedware feelings like nails, levicol, pesting tap, handle, lock, hinges, tower boll, magnate catcher etc as a complete with all necessary required materials and labour as directed by the concern department. |
| 29 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board510x1040 mm bowl depth 250 mm |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 31 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 32 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 33 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes |
| 35 | 20 mm nominal dia Pipes |
| 36 | 25 mm nominal dia Pipes |
| 37 | 32 mm nominal dia Pipes |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work32 mm nominal dia Pipes |
| 39 | 40 mm nominal dia Pipes |
| 40 | 50 mm nominal dia Pipes |
| 41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
| 42 | 32 mm nominal bore |
| 43 | 40 mm nominal bore |
| 44 | 50 mm nominal bore |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work50 mm dia nominal bore |
| 46 | WASTE COUPLING Providing, fitting and fixing Chrome Plated waste (pop-up type coupling complete as |
| 47 | BOTTLE TRAP Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. |
| 48 | FLOOR GRATING Providing, fitting and fixing of Stainless Steel Floor Grating 150mm complete as directed and specified. |
| 49 | Providing and fixing Chrome Plated Soap Dish of standard shape with bracket of the same materials complete as directed and specified. |
| 50 | Providing and fixing Chrome Plated towel ring with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colou complete as directed and specified. |
| 51 | Providing, jointing and fixing SWR pipe Soil, Waste and Vent Pipe System The work shall be done as per technical specifications and in general shall include:Material: swr pipes and fittings conforming to DIN EN 1451-1 and DIN 19560-10 (or equivalant internationally recognized standards)Fittings shall include all standard moulded as well as fabricated fittings like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials Jointing: Pushfit rubber ring jointing technique in general. Installation, Testing and Commissioning: The installation shall be complete in all respects including cutting chases / holes in walls, slabs, excavation, refilling and disposal of surplus earth where required and making good, etc Pipework Support System: All pipework in shafts, ceiling voids and terrace shall be fixed/ supported using preformed, pre-galvanized steel elements and suitable fasteners requiring no welding at site. The supporting system shall be modular and adjustable in all the three planes. Cost for pipework support system shall be included in the rates Making Good the Structure Crossings: For all horizontal and vertical crossings of building structure (slabs, walls, beams, column etc), the space between pipe and the structure shall be made good and water tight with concrete. The annular space between the pipe and the sleeves shall be sealed (upto a minimum depth 25 mm) with fire resistant acrylic based sealent of approved make and quality.Note: Wherever core-cutting is asked for, it shall be paid extra as per relevent item in this BOQ40 mm nominal dia Pipes |
| 52 | 50 mm nominal dia Pipes |
| 53 | 75 mm nominal dia Pipes |
| 54 | 110 mm nominal dia Pipes |
| 55 | 160 mm nominal dia Pipes |
| 56 | Supply, Installation, Testing & Commissioning of a complete Smart Door System consisting of a K-Lite Aluminium Partition with Stealth Door, including all required aluminium profiles such as main portal profiles, vertical profiles and top–bottom door profiles, along with cover strips, gaskets, accessories, hinges, 12 mm toughened glass panels, silicon sealant, a 300 mm handle set, and all associated fixing materials as per manufacturer’s specifications (Make: Ozone or equivalent approved). The item also includes providing and integrating an Electro-Magnetic Lock with a Face Detection Access Control System, complete with power supply unit, brackets, wiring, sensor module, testing and commissioning. The work shall be executed in all respects, ensuring proper alignment, smooth operation, secure locking, finishing, and handing over of the fully functional smart door system. |
| 57 | Supply and installation of Stainless Steel Shelf Rack with 5 shelves, made from SS Grade 202 galvanized steel. Shelves: 0.8 mm thick; Support structure: 1.5 mm thick. Open on all sides with square hollow section frame, double-fold shelf ends, and smooth surface finish. Dimensions: 915 mm (W) x 460 mm (D) x 1675 mm (H); Ground clearance: 75 mm; Frame size: 40x40 mm. Supplied knocked down for site assembly. Complete as approve by Department |
| 58 | Supply and installation of Steel Shelving Cabinet conforming to IS 3312. Dimensions: 1855 mm (H) x 910 mm (W) x 480 mm (D). Made of CR mild steel, HR1 grade as per IS 1079. Includes 4 adjustable shelves, 1 drawer, and 1 lockable locker. Powder-coated finish with plain butt hinges and brass alloy lock handle. Complete as approve by Department |
| 59 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 60 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 61 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 62 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 63 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 64 | 15/16 amp switch |
| 65 | 3 pin 5/6 amp socket outlet |
| 66 | 6 pin 15/16 amp socket outlet |
| 67 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 68 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 69 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 70 | 3 Module (100mmX75mm) |
| 71 | 4 Module (125mmX75mm) |
| 72 | 6 Module (200mmX75mm) |
| 73 | 12 Module (200mm X 150mm) |
| 74 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door |
| 75 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 76 | Triple pole and neutral |
| 77 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.2 run of cable |
| 78 | 3 run of cable |
| 79 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. |
| 80 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (hevells /bajaj or equivelent make) 250 MM SWEEP NON-METTALIC |
| 81 | Supplying of 3-Star Rated Inverter Hi-Wall split type air conditioning unit with Inverter Rottary Compressor, Cu Condenser Coil, Microprocessor based controller with Cordless Remote and R32/R410A . The scope of work will include initial gas charging , ODU , canvas connection , nitrogen flushing , pressure testing and electrical connection between lDU and ODU.as required and as directed by the department. ( Carrier /VOLTAS/diakin or equivalent considering the mother items rate and specification)a) 1.5 Ton Inverter Split AC |
| 82 | b)2.0 Ton Inverter Split AC |
| 83 | Supplying with fitting fixing of 2MP Bullet IP Camera for CCTV System as required and as directed by the department. ( cp plus/hik vision orv equivalent as approved by dept.) |
| 84 | Supplying with fitting fixing of 2MP Dome IP Camera for CCTV System as required and as directed by the department. ( cp plus/hik vision orv equivalent as approved by dept.) |
| 85 | Supplying with fitting fixing of 8-Ports Managed PoE Layer Network Switch in CCTV System as required and as directed by the department. ( Digisol/ D-link/ Netgear or equivalent as approved by dept.) |
| 86 | Supplying with fitting fixing of 6U LAN RACK in LAN/cctv System as required and as directed by the department. ( D-link/VELRACK or equivalent as approved by dept.) |
| 87 | Supplying with fitting fixing of Realtime Power ofBiometric Linux Based Access ControlSystemRealtime Power of Biometric, an Access Control System with TCP/IP basedcommunication, Liveness Detection, mountingbracket/accessoriesas required and as directed by the department. (realtime power or equivalent as approved by dept.) |
| 88 | Installation charge of Split type AC machine of 1.00 Ton to 2.00 Ton capacity |
| 89 | Providing Copper pipe including control cable fitting for Split /Cassetter AC as per required size inclduing Nitrile Insulation complete.For 1.5Tr to 2 Tr Capacity |
| 90 | Supplying with fitting and fixing of ready made powder coated MS frame for Split AC Outdoor Unit Installation inclduing anchor fastnuts complete for split ac upto 2Tr capacity a) for 1.0 Tr to 2.0 Tr Outdoor Unit |
| 91 | Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection.5.0 KVA Automatic Input 120-280 V Out put 200-240 V |
| 92 | Supplying including fitting fixing of AC Starter of 20 A Motor Starter for AC machine in the existing 2/3 Module modular box with front plate as directed by the department. Please Enable Macros to View BoQ information |
