|
| 1 | SUPPLY OF ELECTRICAL MATERIALS |
| 2 | Power Transformer - 8 MVA , 33/11 kV , 3 Phase , Indoor Cable Box Type , with On Load Tap Changer Gear, RTCC Panel along with Complete Accessories. |
| 3 | 33 kV Feeder Indoor Panel 1250 A - VCB, Current Transformer - ratio 600/300/1-1A , Potential Transformer , Relays, Busbar Chamber, Surge Arrestor & Cable Chamber for Incoming Feeder along with Complete Accessories. |
| 4 | 33 kV Transformer ( HV ) Indoor Panel 1250 A - VCB, Current Transformer - ratio 600/300/1-1A , Relays, Busbar Chamber, Cable Chamber for Transformer control (HV) along with Complete Accessories. |
| 5 | 33 kV Bus Coupler with Riser Indoor Panel - VCB, CT with CT ratio 600/300/1-1A, Relays Busbar chamber for Bus coupler & Bus Riser along with Complete Accessories. |
| 6 | 11 kV Feeder Indoor Panel 1250 A - VCB,CT with CT ratio 400-200/1-1A for outgoing feeders , Relays, Busbar chamber , Cable Chamber along with Complete Accessories.(6 Feeders( 5 nos +1 Spare) +1 Station Transformer) |
| 7 | 11 kV Transformer Indoor Panel 1250 A - VCB , CT's with CT ratio 1200/900/1-1A , PT , Relay, Busbar Chamber for Transformer control (LV) along with Complete Accessories. |
| 8 | 11 kV Bus Coupler with Bus Riser Indoor Panel 1250 A - VCB CT with CT ratio 1200/900/1-1A for Bus coupler & Riser control Relays , Busbar Chamber along with Complete Accessories. |
| 9 | 33 kV 1cx630 sq.mm XLPE Aluminium UG cable |
| 10 | 11 kV 1cx630 sq.mm XLPE Aluminium UG cable |
| 11 | 11 kV 3cx120 sq.mm XLPE Aluminium UG cable |
| 12 | 33 kV Indoor HS type Indoor Terminations suitable for Alu 1cx630 sq mm XLPE cable for Power Transformer end and VCB end along with Complete Accessories . |
| 13 | 11 kV Indoor HS type Indoor Terminations suitable for Alu 1cx630 sq mm XLPE cable for Power Transformers and LV VCBs along with Complete Accessories |
| 14 | 11 kV Indoor HS type Indoor Terminations suitable for Alu 3cx120 sq mm XLPE cable for Outgoing feeders along with Complete Accessories- |
| 15 | 11 kV Indoor HS type outdoor Terminations suitable for Alu 3cx120 sq mm XLPE cable for Outgoing feeders along with Complete Accessories- |
| 16 | 100 KVA,11 KV/433 V Station Transformer . |
| 17 | 11 KV HG Fuse set with PT |
| 18 | 11 KV AB switch centre rotating along with PT Insulator without Support Structure. |
| 19 | 11 KV Station Transformer structure using R.S.Joist 200x100 RSJ.channels, angles etc. |
| 20 | Supply of AC distribution box out of 14SWG (2mm) M.S.Sheet along with 100 Amps 3 Phase 4 pole 415V ISI mark change over switch of Iron Clad type wherever necessary as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB, detachable Gland Plate and locking arrangements including cost of all materials with 1 No 3 Pin 16 A sockets (900Wx1000Hx300D) |
| 21 | AC Panel and DC Panel with auto changeover facility |
| 22 | Multistrand armoured copper Control cables of various size including adequate cable glands |
| 23 | 20C X 2.5 sqmm Copper Cable armoured |
| 24 | 14C x 2.5 Sq.mm Copper cable armoured |
| 25 | 8C x 2.5 Sq.mm Copper cable armoured |
| 26 | 8C x 4 Sq.mm Copper cable armoured |
| 27 | 4C x 4 Sq.mm Copper cable armoured |
| 28 | 4C x 2.5 Sq.mm Copper cable armoured |
| 29 | ISI mark 19 / 22 mm cable gland |
| 30 | ISI mark 25 mm cable gland as directed by the field Engineer. |
| 31 | ISI mark cable 28 mm gland as directed by the field Engineer. |
| 32 | Lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination |
| 33 | Supply of GI chequerred plate 6mm thickness for Breaker Panel Erection |
| 34 | Supply of GI CHANNEL 100X50X6mm for Breaker Panel Erection |
| 35 | Supply of GI ANGLE 50X50X6mm for Breaker Panel Erection |
| 36 | Earthing Materials |
| 37 | GI Flat 65 x 10mm , 50 x 10mm, 25 x 6 mm for Earthing |
| 38 | MS Rod 40mm dia (6m length) for Earthing including GEM |
| 39 | 110V 300 AH Battery (1 No.) & Charger (2 Nos.) |
| 40 | 110 V DC 300 Ah Lead acid battery in complete set. (2 nos of Hydrometer, 2nos of Cell tester, 2 nos of Thermometer) with Stand |
| 41 | 110V DC 60 A Battery charger-2 Nos. |
| 42 | Yard Light: Supply of yard light stepped tubular pole 5M Length with base Plate including cost of single/double LED light fitting,Double pole MCB, fiittings,Junction box and painting in complete shape as per direction of field engineer. |
| 43 | Fire fighting equipments, Fire Alarm Detectors, Scientific Equipments & Safety Equipments |
| 44 | Fire fighting equipments |
| 45 | Mechanical Foam Portable type 9 litres capacity fire extinguishers with initial charge complete with chromium plated GM cap, high pressure nylon braided discharge hose with specially designed foam designed nozzle and in general all accessories strictly confirming to the latest issue of ISI Certification mark |
| 46 | Dry Chemical Powder type trolley mounted Cylindrical shape 25KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder level indicator and all accessories confirming to the latest issue of ISI Certification mark |
| 47 | Dry Chemical Powder type Cylindrical shape 9/10 KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI Certification mark |
| 48 | Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark. |
| 49 | Fire/Water bucket of 10 lit capacity made out of 26Swg (0.46 mm) M.S.Sheet painted with white & red enamal paint in side & out side respectively bottom of bucket shall be ` U ` shapped out side of the bucket shall be written as Fire in English /Tamil in white enamal paint including cost of all materials. |
| 50 | Fire buckets Stand. |
| 51 | Carbon dioxide type Cylindrical shape 6.5 KG capacity fire extinguisher with complete with rubber or braided hose,confirming to the latest issue of ISI Certification mark |
| 52 | 1/2 Drum with Cover and filled with River sand |
| 53 | Fire Alarm, smoke detector & associated materials as per specification |
| 54 | 6 Zone Fire Alarm Control panel - 4 wire system. |
| 55 | Smoke Detector |
| 56 | 2c x 1.5 sqmm un armoured copper control cable |
| 57 | Hooter |
| 58 | Manual Call Point |
| 59 | Safety Equipments |
| 60 | Rubber Gauntlets as per IS Standard as directed by the field Engineer. |
| 61 | Rubber Gloves as per IS Standard as directed by the field Engineer. |
| 62 | Aluminium extension type ladder 5 feet Length with support as per IS Standard as directed by the field Engineer. |
| 63 | Rubber mat of size 2000X1000X10mm as per relavent ISI Code. |
| 64 | Telescopic Earth Rod |
| 65 | Discharge Rod |
| 66 | High Beam Torch Light |
| 67 | Tools & Plants |
| 68 | Rain coat |
| 69 | Supply of Reputed make Emergency Light(Rechargable & Portable) |
| 70 | First Aid Kit |
| 71 | Instruction chart with lamination Board |
| 72 | Plastic Name Board ( Feeder Name, LC board, Back charged etc.,) |
| 73 | 33kV & 11 kV breaker name plate details stickers |
| 74 | GPS Synchronised Wall clock |
| 75 | Entrance Floor Mat |
| 76 | Welcome Mat |
| 77 | Insulation Tester 1000Volt Make: Megger/Fluke/Motowane/ Equivalent Make |
| 78 | Digital Multimeter Make: Motowane or Equivalent Make |
| 79 | Earth resistance tester-Megger/Fluke/Motowane/ Equivalent Make |
| 80 | Power clamp meter 400A AC/DC, model CL30 with accessories.Megger/Fluke/Motowane/ Equivalent Make |
| 81 | Portable Hot Air Blower with 1000W capacity Make: Meco, Bosch |
| 82 | Portable Vacuum Cleaner – Capacity 15 Lts Make: Meco, Bosch |
| 83 | Allen Key Set (1.5mm to 25 mm) -Spanners set - Double End , Rings & Box Type ( 8 mm to 25 mm) with Rachet12’’size electrical screw driver12’’sizeelectrical hexagonal head screw driverMake: Taparia, Stanley |
| 84 | Fibre Discharge Rod with cables (33 KV Rating) |
| 85 | Schematic & Earthing layout board (wooden / plastic / Aluminium) having the size of 1200mm x 600 mm and board covered with 3mm thick achorlic transparent sheet. |
| 86 | RTU, UPS, Relays & associated materials to communicate with SCADA as per specification |
| 87 | Supply of Enamel Paint including cost of paint, brush and consumables etc., |
| 88 | Supply of PVC stickers for Breakers,Panels,chargers and General Key Boards as required and as directed by field engineer |
| 89 | ELECTRICAL ERECTION |
| 90 | Erection, testing & commissioning of 8 MVA 33/11 kV Power Transformer with OLTC |
| 91 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works ) of 33kV VCB Panel for incoming feeders |
| 92 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works )of 33kV VCB panel for Transformer control (HV) |
| 93 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works ) of 11kV VCB panel for Transformer (LV) control |
| 94 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works )of 11kV VCB panel for outgoing Feeders |
| 95 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works ) of 33kV VCB Bus Coupler with Bus Riser control |
| 96 | Erection, testing & commissioning ( including cutting, welding , embedding / grouting of MS Channel with necessary masonary works ) of 11kV VCB Bus Coupler with Bus Riser control |
| 97 | Erection, testing & commissioning of 33KV 1x630 Sq.mm, XLPE, UG Cable from 33KV Transformer panels to Power transformers– 300 Mtrs |
| 98 | Erection, Testing & Commissioning of 11KV 1x630 Sq.mm, XLPE, UG Cable from 11 KV Transformer panels to 8 MVA Power Transformer – 300 Mtrs |
| 99 | Erection, Testing & Commissioning of 11KV 3x120 Sq.mm, XLPE, UG Cable from 11 KV panel to Station Transformer – 50 Mtrs |
| 100 | Erection, testing & commissioning of 33kV, 1cx630 Sq.mm, XLPE, HS type ID Termination Kit suitable Alu. Clamps and gland plates used for Pr. Tr. HV side and HV breakers per Power Transformer |
| 101 | Erection, Testing & Commissioning of 11kV, 1cx630 Sq.mm, XLPE, HS type ID Termination Kit suitable Alu. Clamps & gland plates used for Pr. Tr. LV side per 8 MVA Power Transformer |
| 102 | Erection, Testing & Commissioning of 11kV, 3cx120 Sq.mm, XLPE, HS type ID Termination Kit. Suitable Alu. Clamps & gland plates Station Transformer |
| 103 | Erection, Testing & Commissioning of 11kV, 3cx120 Sq.mm, XLPE, HS type OD Termination Kit. Suitable Alu. Clamps & gland plates Station Transformer |
| 104 | Erection, testing & commissioning of AC Panel & DC Panel |
| 105 | Erection, Testing & commissioning of Control cable and G.I cable tray with necessary fixing accessories. |
| 106 | Labour for erection of 33/22 / 11KV/433V Station Transformer with using crane with provision of hardwares,etc., |
| 107 | Labour for erection of HG fuse 3pole set 11KV |
| 108 | 11 KV Station Transformer structure |
| 109 | Labour for erection of AB Switches, including erection of insulators and alignment works with provision of hardwares,etc., 11 KV Station Transformer |
| 110 | Labour for erection of AC distribution box out of 14SWG (2mm) M.S.Sheet along with 100 Amps 3 Phase 4 pole 415V ISI mark change over switch of Iron Clad type wherever necessary as directed by the field Engineer. |
| 111 | Labour charges for auguring to a depth(Normal Bore) of 6mtr/20ft and fixing the M.S round rod 40mm dia and making M.S Clamping arrangement in top of the rod and 4nos 12mm dia holes in clamp for inter linking of M.S. flats in any kind of soil and fixing with ,GEM / Earth Enhancing Material and burried in ground and as directed by Engineer in charge. |
| 112 | Labour charges for laying, cutting welding and painting of MS flat of size 65 x 10 mm and interconnecting. The plate should be burried at a depth of 2 feet depth or laid in duct as per site condition and clamped out one meter Interval and painted with twin coat redoxide and enamal green paint before laying and as directed by Engineer in charge for earthing |
| 113 | Erection of Battery and Battery Charger(2 Nos) |
| 114 | Erection, Testing & commissioning of Fire Alarm, smoke detector with associated materials and other fire fighting equipments as per specification and as finalised during detailed Engg |
| 115 | Erection of RTU, DLMS & associated materials to communicate with SCADA as per specification |
| 116 | Labour charges for writing details in any finished surface boards including cost of enamel paint (Dulex,Asian,Berger preferred) and other consumables as directed by the field engineer |
| 117 | Fixing of PVC stickers for Breakers,Panels,chargers and General Key Boards and other works etc, as required and as directed by field engineer |
| 118 | Erection of LED Lamp with fitting in 5.0m pole and laying of cable inside the pole including testing for burning condition including fuse unit Please Enable Macros to View BoQ information |
