|
| 1 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n. exc 1.5 Sqm each and removing from site and making good the disturbed portion in CM (1:3) or PCC (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and as directed. Note:- The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface without any extra cost. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n. exc. 4 sqm each and removing from site and making good the disturbed portion in CM (1:3) or PCC (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and as directed. Note:- The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface without any extra cost. |
| 4 | Taking down shutter of any description exc 1.0 sqm and not exc 2 sqm each complete all as specified and as directed. |
| 5 | Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed. |
| 6 | M&L for 10 mm thick rendering using polymer modified ready-mix cement based mortar (conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:3) as per manufacturer's instruction on brick work or concrete surfaces as on ceilings including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech / Dr. Fixit / Fosroc |
| 7 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for 15 mm thick rendering using polymer modified ready-mix cement based mortar conforming to (IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:4) as per manufacturer's instruction on brick work or concrete surfaces of walls /damaged irregular surface of chajjas, roof projections, ceiling, fascia etc including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech / Dr. Fixit / Fosroc. Note:- The cost of necessary scaffolding up to (G+2 storey) shall be deemed to be included in unit cost. |
| 9 | M&L for 15mm (average) thick rendering dubbing coat over damaged irregular surface of chajjas, roof projections, ceiling, fascia etc in CM (1:4) over cement slurry coat @3 Kg /sqm, making the surface even followed by 5 mm thick rendering in CM (1:3), surface finished even and smooth including making of drip course as required complete all as specified and as directed. Note:- (i) Rate for form work if required shall be deemed to be included in the rate quoted by the contractor. (ii) Rate for roughening surface of RCC/PCC by picking, sweeping, cleaning and washing down with water etc. shall be deemed to be included in unit rates. |
| 10 | M&L for washed stone grit plaster (of any colour/ pattern) on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15 mm cement plaster (1:1/2:2) (1 cement: 1/2 coarse sand : 2 coloured stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings and incuding taking down existing cement plaster or cement lime plaster on brick or stone walls etc complete all as specified and as directed by Engr-in-Charge. Note:- Payment for providing grooves shall be measured and paid separately. |
| 11 | Forming groove of uniform size 5-10mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using PVC battens/ strips, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete complete all as specified and as directed. |
| 12 | M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 13 | Description all as per ser item No. 12 above but except brick complete all as specified and as directed. |
| 14 | M&L for brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, in half brick thick wall built in CM (1:4) complete all as specified and as directed. |
| 15 | Demolition of reinforced concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 16 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed. |
| 17 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 18 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed |
| 19 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and as directed. |
| 20 | M&L for providing RCC (1:2:4) (nominal mix) type B1 (using 20mm graded stone aggregate) as in footing, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc and the like complete all as specified and as directed. |
| 21 | Use and waste for rough finished surfaces of concrete form work to sides and soffits of floor or roof beams, beam haunchings, columns, girders, bressummers, lintels, and simillar work complete all as specified and as directed. |
| 22 | M&L for providing RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and as directed. |
| 23 | Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 24 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and as directed. |
| 25 | M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 26 | S&F mild steel TMT bars 8 to 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 27 | Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 28 | Demolition of stone slabs and tiles laid, beded and pointed in any mortar of any description or any thicknes as in floors, aprons etc complete all as specified and as directed. |
| 29 | M&L for dark coloured / printed /highlighter ceramic tiles (digital first quality) of size (300 x 600)mm x 7 to 8mm thick as on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed. |
| 30 | M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300 x 200)mm x 7mm thick/ (450 x 300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed. |
| 31 | M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile, laid over & including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed. |
| 32 | M&L for vitrified printed digital tiles dark shade, joint free, first quality in different colours pattern as in floors of 8 to 10mm thick (square / rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in floor etc including 10mm thick ready-mix cement based mortar adhesive for fixing tiles, set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified and as directed. |
| 33 | M&L for vitrified ceramic tiles dark /printed shade tiles 20 mm thick (square/rectanglar) polished, area of each tile exceeding 2.6 sqm but not exceeding 3.0 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed. |
| 34 | S&F vitrified ceramic tiles dark /printed shade tiles 18 mm to 20 mm thick (square/rectanglar) polished area of each tile in staircase riser & traider (one pice) ,vertical surfaces/skirting etc ,set and jointed with grey cement slurry mixed with pigment to match the shade of slab, size of slab exceeding 0.11 sqm but n.exc. 0.36 sqm including provision of screed bed 15 mm thick in cement mortar 1: 4 and a coat of cement slurry @ 3 kg/sqm including rubbing and polishing etc complete all specified. |
| 35 | M&L for granite (of any type) tiles 18mm to 20mm thick as in floor, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10mm thick ready-mix cement based mortar adhesive for fixing tiles, cutting and polishing complete all as specified and as directed. |
| 36 | M&L for 18mm to 20mm thick granite single piece (of any type) work (table rubbed and polished) as in steps, jambs, pillars, walls, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick screed bed or bedding layer ready-mix cement based mortar adhesive for fixing tiles and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 37 | M&L for 18mm to 20mm thick Italian marble single piece (of any type) work (table rubbed and polished) as in steps, jambs, pillars, walls, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer of morar including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed. |
| 38 | M&L for Durastone heavy duty tiles of size (600 x 600)mm x 10mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and as directed. |
| 39 | M&L for precast cement concrete designer tiles 22 to 25mm thick glossy finish, heavy duty of approved brand and manufacturer and required shape and size as approved by GE over and including 15mm thick screed bed in CM (1:6) including pointing with coloured cement to match the shade of tiles complete all as specified and as directed. |
| 40 | M&L for 60mm thick glossy finish ultra interlocking designer tiles medium duty of any colour, shape or pattern as in floor, paving laid over 25mm thick sand cushioning set and jointed complete all as specified and as directed. |
| 41 | M&L fgor grinding and bees wax polishing as in floors, skirting, dado etc, with admixture of pigment to match the shade including repair work of existing Kota stone as same specification complete all as specified and as directed by Engr-in-Charge. Note: (i) Rates also including in this item for necessary replacement of terrazzo topping tiles and Kota stone slab etc which are required for repair of existing floor and no extra payment for utizied matarial in repair work in floor. (ii) Mode of measurement:- Actual area grinding with bees wax polishing with repair (floor and adjoining walls) shall be measured and paid. |
| 42 | M&L for stainless steel railing 110cm high including details as given below (not less then 1.6mm wall thickness) :- (a) Vertical post (baluster) 50 mm outer dia 96 cm high jointed with 20 mm dia 7.5 cm high alongwith base plate 100 mm dia x 15 mm and 16 gauge height as per sample fixed for each steps (treads) (b) 65mm dia hand rails & newal post including 100mm dia ball at top of newal post.(c) 4 Nos 25m dia bracing along the stair case 16 gauge all as per sample. Please Enable Macros to View BoQ information |
| 43 | M&L for stainless steel railing 110cm high including details as given below (not less then 1.6mm wall thickness) :- (a) Vertical post (baluster) 50 mm outer dia 96 cm high jointed with 20 mm dia 7.5 cm high alongwith base plate 100 mm dia x 15 mm and 16 gauge height as per sample fixed for each steps (treads) (b) 65mm dia hand rails & newal post including 100mm dia ball at top of newal post.(c) 4 Nos 25m dia bracing along the stair case 16 gauge all as per sample. Please Enable Macros to View BoQ information |
