|
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. |
| 3 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified |
| 4 | M&L for squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed. |
| 5 | M&L for squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) but except stone complete all as specified and directed. |
| 6 | Extra over of hammer dressing to face stone with maximum depression on face from straight edge not exc 20mm and dressing face bed and joints as specified to squared rubble walling jodhpur type brought upto cources as directed |
| 7 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 8 | M&L for half brick thick wall with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 15 mm thick in CM (1:4) in two layers (10mm thick in ist layer and 5mm thick in final layer) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and fair with WPC as per manufacturer instruction complete all as specified and directed. Note :- Rate for WPC shall be measured seperate item |
| 11 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and fair complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified. |
| 14 | M&L for preparation of newly plastered/ pointed surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint (weather proof exterior grade emulsion) of required shade(company Depot tinted) with silicon additives @ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @0.90Litre/10Sqm complete all as spd Note:- The contractor shall produce batch certificate & delivery challan directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at site along with paint manufacturers drums with seal intact complete all as specified and directed. |
| 15 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash complete all as specified and directed. |
| 16 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 17 | M&L for preparation of the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer including a layer of 1mm thick wall care putty on wall surfaces to lsmooth the surface complete all as specified and directed. |
| 18 | Complete removal of exisiting treatment, washing rubbing of old treatment and applying two coat of oil bound distemper over a coat of primer including a layer of 1mm thick wall care putty on wall surfaces to lsmooth the surface complete all as specified and as directed. |
| 19 | Complete removal of exisiting treatment, washing and rubbing of old surfaces of wall and applying 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint (weather proof exterior grade emulsion) of required shade(company Depot tinted) with silicon additives @ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @0.90Litre/10Sqm complete all as spd Note:- The contractor shall produce batch certificate & delivery challan directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at site along with paint manufacturers drums with seal intact |
| 20 | Complete removal of exisiting treatment, washing rubbing of old treatment and applying 3 coats of white wash on wall surfaces complete all as specified |
| 21 | Complete removal of exisiting treatment, washing rubbing of old treatment and applying 3 coats of white wash on ceiling surfaces complete all as specified. |
| 22 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) etc.complete all as specified and directed. |
| 23 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 24 | Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 25 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as spd |
| 26 | M&L for hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15mm thick watered and rammed to a true surface |
| 27 | M&L 75 mm thick cement concrete type C2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring / hard standing even and rough to receive the topping layer complete all as spd and directed by engr in charge |
| 28 | M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in floor etc without using extra cement and surface to be finished even and smooth w/o extra cement of proper slope in panels n.exc 2Sqm using 3mm thick glass strip of 38 mm as dividing strip complete all as spd and directed by EIC.Note:- rate for glass dividing strips is not included in this item shall be measured seperate item. |
| 29 | S&F for 3mm thick dividing strip of 38mm wide used in PCC flooring etc complete all as spd |
| 30 | M&L Non - skid Ceramic tiles 6 to 8mm of area exc 0.06 sqm and not exc 0.11sqm and over and including 15 mm thick cement screed bed in CM (1:6) , set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed. |
| 31 | M&L Non - skid Ceramic tiles 6 to 8mm of area exc 0.11 sqm and not exc 0.18 over and including 15 mm thick cement screed bed in CM (1:6) , set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed. |
| 32 | M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6 ) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6 ) complete all as specified and directed. Please Enable Macros to View BoQ information |
