|
| 1 | Dismantling plain or corrugated steel sheeting, any guage, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 3 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 4 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/soft soil complete all as specified and as directed. |
| 5 | Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified and as directed. |
| 6 | M&L for removing of excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified. |
| 7 | M&L for PCC Type D2 1:4:8 (40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 8 | M&L for CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 9 | M&L for 6mm to 8mm dia CRS TMT bars in reinforcement cut to length, bent to shape required including crankling, bending hooking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | M&L for formwork rough finished surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 12 | M&L for formwork to rough finished surface of concrete (square, rectangular or polygon)to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 13 | M&L for RCC Nominal mix type B1, 1:1.5:3 (20mm graded aggregate) as in footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete complete all as specified and as directed. |
| 14 | M&L for RCC Nominal mix type B1, 1:1.5:3 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 15 | S&F for rolled mild steel in Plates Fe-410-W (grade E-250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 16 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm but not exc 22.50cm long, diameter of neck 5 to 10mm complete all as specified and as directed. |
| 17 | Use and waste of formwork to sides of columns and similar work for rough finished surfaces of concrete for square, rectangular circular or polygonal complete all as specified and as directed. |
| 18 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc using Fe 410-W (GdeE- 250) quality A complete all as specified and as directed. |
| 19 | S&F mild steel of Grade Fe-290 (E-165) work Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 20 | S&F pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 21 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed. |
| 22 | S&F 200mm width rectangular UPVC heavy duty eaves gutter of approved make including necessary fitting like bend WC/MS clips etc complete all as specified and as directed. |
| 23 | S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed. |
| 24 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. |
| 25 | M&L for rendering 10 mm thick rendering in CM 1:6 on fair faces of brickwork (internal plaster) or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 26 | M&L for cement plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth without using extra cement with using Approved WPC complete all as specified and directed. (Note : WPC shall be meassured and paid separately under relevant item) |
| 27 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 28 | M&L for preparation new plastered external wall surfaces and apply Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over over 1.00mm thk wall care putty complete all as specified and directed. |
| 29 | M&L for preparation newly plastered surface of wall and applying one coat of wall care putty 1mm thick on new wall surfaces & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed. |
| 30 | M&L for complete removal of existing treatment on internal surfaces of walls, applying two coats of distemper oil emulsion on primered surfaces over 1mm thick wall care putty all as specified and directed. |
| 31 | M&L for complete removal of existing surface finishes of external wall surface and applying two coats of Antifungal and anti algae premium exterior emulsion over two coat of elastomeric waterproofing membrane as per manufacturer instruction complete all as specified and as directed by Enginner-in-Charge. Note: (i) The old surface shall be prepared using mechanical ways i.e jet spray, grinding etc, in such a manner so that there should not be any impression of dent, all cracks to be filled with crack filler and it should be made even all as per manufacturer instruction before application of primer/base coat and emulsion paint. The cost of materials, labour & T&P wherever required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacturer. The MoU between contractor and paint manufacturer to this effect shall be submitted prior to execution of these items.(iii) The conractor shall be submitted performance guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completetion of entire work. (iv) The cost of scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor. |
| 32 | M&L for preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 33 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 34 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 35 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 36 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 37 | S&F second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 38 | S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 39 | S&F butt hinges 100mm stainless steel hinges complete all as specified and as directed. |
| 40 | S&FButt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 41 | S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. |
| 42 | S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 43 | S&F aluminum bow handle \\"D\\" type anodized 150mm long complete all as specified and directed. |
| 44 | Providing and fixing factory made uPVC white colour casement (Openable) window area not exceeding 1.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. (Note: The unit rate quoted by the contractor shall be exclusive of cost of glass and inclusive of all other connected accessories. The net opening shall be measured for payment purpose.) |
| 45 | Providing and fixing factory made uPVC white colour casement (Openable) window area exceeding 1.00 sqm but not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. complete all as specified and directed. (Note: The unit rate quoted by the contractor shall be exclusive of cost of glass and inclusive of all other connected accessories. Net opening shall be measured for payment purpose.) |
| 46 | S & F sheet glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. |
| 47 | S & F figured glass, pin head type plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. |
| 48 | S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples complete all as directed. |
| 49 | M&L for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 50 | M&L for antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc complete all as specified and directed. |
| 51 | M&L for antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along internal wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors complete all as specified and directed. |
| 52 | M&L for antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing complete all as specified and directed. |
| 53 | M&L for antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 54 | M&L for 75mm thick Type D2 PCC 1:4:8 ( 40mm graded crushed stone aggregate) as in floors, foundation etc complete all as specified and directed. |
| 55 | M&L for PCC type B-1, 1:2:4 (20mm graded aggregate) 25mm thick as in floors complete all as specified and directed. |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed. |
| 57 | M&L for glazed ceramic coloured tiles in vertical surface 450x 300x 7 mm/ 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:3 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
| 58 | M&L for glazed ceramic coloured tiles in vertical surface 450x 300x 7 mm/ 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:3 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
