|
| 1 | Earth Work : |
| 2 | Demolishing brick work including stacking of serviceable material sand disposal of unserviceable materials with all lifts and upto a lead of 50metc. complete as per direction of the Engineer- in-charge: |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 4 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer- in-charge. |
| 5 | First class brick work in superstructure above plinth level upto floor five levelincluding cost of all materials as required complete In cement mortar 1 :4 |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 7 | Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.-All kinds of soil |
| 8 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 9 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40 mm nominial size) |
| 10 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering 1:2:4 (1 cement: 2 fine sand:4 graded stone aggregate of 20 mm nominial size) |
| 11 | First Class Brick work in foundation and plinth including cost of all materials as required complete:-In Cement mortar 1:4 (1 cement : 4 fine sand) |
| 12 | Steelwork in built up tubular(round, square or rectangular hollow tubes etc.) trusses etc including cutting hoisting fixing in position and applying in priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete |
| 13 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers complete Ridges/Valley/Gutter/Flashing of width 610mm |
| 14 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc. complete as per direction of Engineer-in charge. 0.80mm thick with zinc coating not less than 275gm/m2 |
| 15 | M-1.23 60 mm thick factory made c.c interlocking paver block of M-35 GradeProviding and laying factory made coloured chamfered edge cement concrete paver block of required strength, thickness and size |
| 16 | 12 mm cement plaster in single layer including cost of material required and finished even smooth and cutting complete |
| 17 | 15mm cement plaster on the roughside of single or halfbrickbrick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) |
| 18 | Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge |
| 19 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622- 2017 (thickness to bespecified by the manufacturer) of approved make in allcolours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry includingpointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
| 21 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade[Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats) over and including waterthinnable priming coat with cement primer |
| 22 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 23 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of430x260x350mmand340x410x265mmrespectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 24 | Providing and Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. Automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cuttingand making good the walls and floors etc. wherever required |
| 25 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete |
| 26 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 27 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality |
| 28 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour. |
| 29 | ProvidingandfixingC.P.brassshowerrosewith15or 20 mm inlet: |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size660x460 mm with single 15 mm C.P. brass pillar taps withelbow operated levers ISI marked. |
| 31 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 33 | Providing and fixing toilet paper holder C.P. brass |
| 34 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg /cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion |
| 35 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion |
| 36 | Single equal tee without door |
| 37 | Single equal tee with door 110x110x110mm |
| 38 | Bend 87.5 |
| 39 | Plain shoe 110mm |
| 40 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC soil, waste &vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. |
| 41 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) |
| 42 | Providing and fixing 12 mm thick prelaminated threelayer medium density (exterior grade ) particle boardgrade-I, type II conforming to IS : 12823 bonded withphenol formaldehyde synthetic resin, of approved brandand manufacture in panelling fixed in aluminium doors,windows, shutters and partition frames with C.P. brass /stainless steel screws all complete as per architecturaldrawing and the direction of Engineer-in-charge |
| 43 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) : With float glass panes of 5.5 mm thickness ( weight not lessthan 13.75 kg / sqm ) |
| 44 | Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated with one side decorative lamination and other side balancing lamination, with necessary arrangement and screws etc. all complete. |
| 45 | Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hardwood and well matched teak 3 ply veneering withvertical grains or cross bands and face veneers onboth faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 46 | Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm in true horizontal level,suspended on interlocking metal grid of hot dippedgalvanized steel sections ( galvanized @ 120 grams/ sqm,both side inclusive) consisting of main \\"T\\" runner withsuitably spaced joints to get required length and of size24x38 mm made from 0.30 mm thick (minimum) sheet,spaced at 1200 mm center to center and cross \\"T\\" of size24x25 mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600 mm center tocenter to form a grid of 1200x600 mm and secondary cross\\"T\\" of length 600 mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle ofthe 1200x600 mm panel to form grids of 600x600 mm andwall angle of size 24x24x0.3 mm and laying false ceilingtiles of approved textureinthegridincluding,requiredcutting/making, opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc. Main \\"T\\"runners to be suspended from ceiling using GI slottedcleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanized butterfly level clips of size85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sectionsshall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 47 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592TypeA includijointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : Single socketed pipe - 110 mm OD Please Enable Macros to View BoQ information |
