|
| 1 | Dismantling of ceramic tiles carefully and scraping the plaster to making the surface clean for refixng the glazed tiles removing of malba complete in all respect and to the entire satisfaction of the Engineer in Charge. |
| 2 | Providing and laying vitrified floor tiles of size 600 x 600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Single charge vitrified tile of size 600x600 mm |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm. The grove are to be filled with cementitous grout mix with proportion of 0.90kg grout and 0.10 kg of hardener for each lg of filling material. Single charge vitrified tile of size 600x600mm |
| 4 | Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble (Based on DSR 8.2.1.2) |
| 5 | Providing and laying 1st quality ceramic glazed wall tiles of size 300x450 mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades as approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. |
| 6 | Providing and laying antiskid ceramic floor tiles of specified size (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. Size of tile 300x300 mm |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing wooden cabinet of 13 1/2\\"deep and 2'-0\\" height with openable shuutter at wall above 4'-9\\" height consisting of 18mm Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked lipped with HARD wood lipping 18mm x 6mm exposed edges including cost of piano hinges, handle, magnetic, catcher nail screw and fevicol etc fixed in position with the help of fastner at walls complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 9 | Providing and fixing Kitchen cabinet below working shelves as per detail consists of chowkat frame of hollock wood of 2\\"x2\\" section with suitable rebate of 1\\"x1/2\\" on outer side of shutter.The shutters are to be provided with 18mm Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked lipped with HARD wood lipping 18mm x 6mm exposed edges including cost of Piano hinges, handle, magnetic, catcher nail screw and fevicol etc fixed in position with the help of fastner at walls. It further includes the cost of painting two coats of special quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 10 | Providing and fixing 35mm thick Golden champ wood wire gauge door shutter(kiln seasoned) consisting of vertical style rail 100 mm, lock rail 150mm,bottom rail 200mm, 12x24 gauge wire mesh fixed with ½”x3/4” golden champ beading i/e necessary aluminum joinery fitting,door spring, Al.door stooper, screw,nails,fevical etc,in the existing chowkhat.The rate include the two coats of special quality paint over priming coat complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 11 | Providing and fixing golden champ wood chowkhats(Kiln seasoned) including cost of corner straps iron hold, fast, hinges, screws ,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhat. Rate include the cost of dismantling of all damage chowkhats and making good the damaged to wall plaster and floor as required including disposal of rubbish to the dumping ground . The rate further includes the cost of special quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.(N.S) 4.1/2”x2.1/4. |
| 12 | Providing and fixing of cupboard shutter consisting of 18mm thick ply board with lipping all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with Alum. handle (with base plate) and magnetic catcher. The board surface is to be painted with two coats of special quality synthetic enamel paint after primer coat and preparation of surface, complete frame is to be fixed with iron nails etc. complete in all respects and to the entire satisfaction ofthe Engineer in charge. |
| 13 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2\\"x3/4\\" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 3\\" butt hinges Alum tower bolts 4\\", Alum handles 1 nos. I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 14 | Providing and fixing 35 mm thick phenol bonded factory manufactured solid flush door shutter ( ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of Iron hinges, all necessary aluminium fitting and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respects and to the entire satisfaction of engineer- in - charge. |
| 15 | Distempering with 1st quality acrylic distempe. (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said.Old work (one or more coats) |
| 16 | 12 mm cement plaster of mix:1:4(1 cement: 4 fine sand) |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 18 | Providing, applying and filling the surface cement based putty (Birla,JK or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @0.90 Itr/10 sqm). |
| 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. with necessary screws to the existing wooden frame including coat of synthetic enamel paint over one coat of primer complete in all respects and to the entire satisfaction of the Engineer in charge. Please Enable Macros to View BoQ information |