|
| 1 | Special repairs in dormitory building , toilet block , workshop kitchen and shop building with necessary electrical , water supply and sanitary arrangements to truck terminal at plot No.AA3 at SIPCOT Industrial Park, Vallam vadagal |
| 2 | Clearing light jungle after setting out of the alignment including grubbing the root bush, wastes logs,Dozzing and other debries etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 3 | Clearing Scrub jungle after setting out of the alignment including grubbing the root bush, wastes logs,Dozzing and other debries etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 4 | PLASTERING WITH CEMENT MORTOR 1 : 3 - 12 MM thick in all floors including curingetc. complete complying with standard specification as directed by the SIPCOT officers. |
| 5 | Removing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 6 | Paving the floor with best quality double charged vitrified Tiles of following size 600 x 600 x 8 mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 7 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes 150mm x 150mm x 6mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, eetc. complete complying with standard specification as directed by the SIPCOT officers. |
| 8 | Dismantling plain cement concrete materials at site etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 9 | Providing plain cement concrete 1:2:4 using 20 mm ISS HBG Metal including cost and conveyance of all materials at site and all labour charges for mixing, laying and curing etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 10 | Providing and laying tack coat over Existing BT surface using 2.00 Kg of bitumen emulsion (RS1) per 10 m2 for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 11 | Providing and laying 40mm compacted thickness bituminous concrete using 0.13 cum of 19.0 - 9.5 mm graded IRC size HBG metal 0.17 cum of 9.5-2.36mm IRC graded metal and 0.26 Cum. of 2.36 mm and below size graded metal with 50.30 of bitumen grade VG 40 confirming to IS 73 for pre mixing for 10 Sq. meter and using materials as per table 500 - 17 and staifying the physical requirement for material for course aggregates for BC as per table 500 - 16 of MORTH REV-V including cost and conveyance of all materials to CMP site , heating the bitumen andaggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity, conveyin the mix by tipper trucks to paver site spreading the mix in required temperature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidation 80-100 kn vibratory/Pneumatic road roller to the required density etc., includinglabour charges for loading the bitumen in bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire, fuel charges for 20-30 tonnes capacity CMP unit bitumen boiler, tipper trucks, paver finaisher/9 m paver finisher /Vibratory/Pneumatice road roller , and all other tools and plants requried, including fuel and all other incidental charges etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 12 | Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever requiredetc. complete complying with standard specification as directed by the SIPCOT officers. |
| 13 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 14 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 15 | Supply and fixing of Solid panel PVC door with frame including fitting etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 16 | Painting \\"TWO COATS OVER OLD IRON WORK\\" such as steel doors, windows, ventilators, Balustrades and collapsible gate and other similar works with best approved colour over the exsisting priming coat etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 17 | Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 18 | supplying and fixing in position best approved quality Indian make white Glazed Earthern \\"WASH HAND BASIN\\" of size 58mm x 400mm (parryware or equivalent) including cost of cast iron Brackets. 15mm dia C.P. Brass pillar tap, 32mm dia PVC Waste pipe, 32mm dia Brass C.P. waste coupling with rubber plug and chain, 15mm Brass Nipples, 15mm Nylon connection including labour charges for fixing in position the wash basin in the wall with a pair of C.I. Brackets with necessary Teakwood plugs and Brass screws, rubber washers, white lead and giving necessary water supply connection, testing for leakages etc. The C.I. brackets shall be painted two coats with Anti-corrosive paint over a cost of primer. etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 19 | Supply and fixing of Brass chromium plated screw down tab/pillar cock/pipe cock - 20 mm dia. (short body- hevey duty) etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 20 | Spplying and fixing in position of approved quality of PVC Rain Water/Waste water pipes of following size 110 mm dia - 4 kg/cm2 including cost of necessary shoes, PVC bens cast iron gratings of required diameter and special clamps, brass screws, nails etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 21 | 110mm dia (OD) PVC pipeetc. complete complying with standard specification as directed by the SIPCOT officers. |
| 22 | 50mm to 75mm dia (OD) PVC pipe etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 23 | Spplying and fixing in position 1000 litres capacity of HPDE materials ready made SYNTEX or equivalent water tank in places ahown by SIPCOT officials including cost and conveyance to work site and fixing in position etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 24 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation etc. complete complying with standard specification as directed by the SIPCOT officers.. |
| 25 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher Endetc. complete complying with standard specification as directed by the SIPCOT officers. |
| 26 | Supply and fixing of 6A 5 pin Universal socket -2 module etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 27 | Supply and fixing of 16A/6A 3 pin socket - 2 module etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 28 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20Wtube(HigherEnd)complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 29 | Supply and fixing of fancy glass shade and 15 W LED Bulbb etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 30 | supplying and fixing of 6 way TPMCB sheet steel Distribution board flush type/ surface type fitted with bus bars and neutral links single/ three phase MCB out goings 6 way provision for accomodating 1 number 4 pole ELCB/RCB with label holder and provisions for taking cable of size not less than 35 sq.mm (out going 12 for 4 way DB) brands - HPL/ Havelis or equivalent with ISI mark. (etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 31 | supplying and fixing of 4 way TPMCB sheet steel Distribution board flush type/ surface type fitted with bus bars and neutral links single/ three phase MCB out goings 6 way provision for accomodating 1 number 4 pole ELCB/RCB with label holder and provisions for taking cable of size not less than 35 sq.mm (out going 12 for 4 way DB) brands - HPL/ Havelis or equivalent with ISI mark.etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 32 | Supplying and fixing of 375 mm sweep AC exhaust fan complete with provision of hole in the wall and making of the wall etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 33 | Supply and fixing of Run of 2 core of 4 sq.mm with continuos earthing etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 34 | Suppying and fixing of AC Metal clad TP/DP switch box etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 35 | Supply and fixing of 1200mm(48\\")sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 36 | Street light arrangememnts |
| 37 | Supply and fixing of 120W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 38 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good..etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 39 | supply , laying and testing of 2 core x 1.50 Sq.mm PVC insulated SC unsheathed Cu.cable conductor cable of 1100 v drade with necessary Jointing materials etc., including cost and conveyance of cable and labour charges for laying the cable etc., complete complying with appropriate specification / standards and as directed by SIPCOT officers. (SD-1, Pg.2) |
| 40 | Supply and fixing of 300 W LED Flood light fitting higher end with innovative thermal multiple optics and equipped with IP 66 protection etc., complete complying with standard specification and as directed by SIPCOT Officers |
| 41 | Earthing as per the ISI specificatio nwith an earth electrode of 2.10 metre Class 'B'GI pipe of dia not lessthan 40mmwith copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc. complete complying with standard specification as directed by the SIPCOT officers. |
| 42 | Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate) |
| 43 | Added GST of 18% Please Enable Macros to View BoQ information |
