|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Plain Cement Concrete 1:1.5:3 (one cement, One and Half crushed stone sand and Three hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means (S.No:135-SD Book Vol-I ) |
| 4 | Supply and fixing of 1200 mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110) |
| 5 | Supply and fixing of single box type 4'40 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 88) |
| 6 | Supply and fixing of fancy glass shade and 7W / 9W LED bulb SD79 |
| 7 | Supply and fixing of 20W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . SD455 |
| 8 | 32Amps 400V Change Over Switch(SD654) |
| 9 | MCB 10A single pole MCB |
| 10 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone M.Sandand five part of 40mm gauge brick jelly) and finished with Cement (M-0572) |
| 11 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. .(M-0562) |
| 12 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before useon works).(M-0564) |
| 13 | Supply and Fixing of CP two way Bib cock with health faucet (M-0515) |
| 14 | Supplying and fixing in position Brass C.P.Shower rose 100 MM Dia. with stop cock arrangement , of size 15mm dia with necessary cutting ,threading and jointing using shellac etc., complete complying with standard specification and as directed by thedepartmental officers.(M-0513) |
| 15 | Supplying and fixing Teakwood fully panelled (Single Leaf) shutters using Teakwood scantlings of size 100x40mm for styles & rails, 22mm thick planks for panels(5 Nos) and Brass Furniture fittings(3 Nos - Brass Hinges 125x30mm, 2 Nos - Brass Tower bolt 300x12mm, 1 Nos - Brass Tower bolt 200x12mm, 1 Nos - Brass Aldrop 250x16mm, 2 Nos - Brass Handle 200mm) including cost of wind appliances and labour charges for fixing the furniture fittings in position etc., complete complying with standard specification and as directed by the departmental officer |
| 16 | Supplying and fixing Teakwood frame with scantling above 2m for doors including labour charges for wrought and putup and fixing holdfast in frame etc., complete complying with standard specificationand as directed by the departmental officers |
| 17 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, lockingarrangements and labour charges etc.,(WD-M1471) |
| 18 | Drilling of 150 mm dia Bore well in hard rock area to any required depth as decided by the Departmental officers including Transportation from one place to anothr place with in Tamilnadu State by direct method using contractor's rig tools at the site shown by the Departmental Officers including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification |
| 19 | Supply and Erection of PVC CASING PIPE AS PER IS 12818 / 2010 150mm dia including all cost ec.., |
| 20 | Supply and Erection of PVC CASING PIPE AS PER IS 12818 / 2010 200mm dia including all cost ec.., |
| 21 | Supply and delivery of 1HP Single phase Submergeble Pumpset as per Is 8034 with out Panal Board including all labour charges etc (20 Lpm x 125 m Head ) (WD-M1597) |
| 22 | Supply and delivery of 1 HP Single phase Panal Board With two level gurd and Auto Start including all labour charges etc Complete (WD-M1905 ) |
| 23 | Supply and Delivery and fixing ofHDPE tank 1000litr of as per IS1 12701/1996 inculding,unloading,transportation and labour charges for fixing of the GI pipes and Specials for Pipe connection works Inculding cutting,threading and Fixing charges etc., Complete WD-M1418 |
| 24 | Supply and delivery of pipes and pipes specials including all charges etc.,Complete 50 mm HDPE Pipes PN6 PE100 (WD-M0184) |
| 25 | Nylon Rope for Bore-well (M-1072) |
| 26 | 25mm CPVC Pipe(M-1095) |
| 27 | 25mm CPVC Elbow (M-1166) |
| 28 | 25mm CPVC Tee (M-1172) |
| 29 | 25mm CPVC BallValve (WD - M0819) |
| 30 | 20mm CPVC Pipe (M-1094) |
| 31 | 20mm CPVC Elbow (M-1167) |
| 32 | 20mm CPVC Tee (M-1173) |
| 33 | 25mm FTA (WD-M0804) |
| 34 | MS Bore Cover |
| 35 | MS Clamp Set |
| 36 | 2.5 Sqmm 3 core Flat cable (WD-M1924) |
| 37 | 25mm PVC Pipe |
| 38 | 25mm PVC Bend(M-0894) |
| 39 | 25mm PVC Elbow(M-0888) |
| 40 | 25mm PVC Tee(M-0900) |
| 41 | 20mm PVC Bal Valve |
| 42 | 25mm Tank Nipple |
| 43 | Woodern Board 0.60x0.45 |
| 44 | 25 mm PVC Tap |
| 45 | 25 mm GM NR Valve |
| 46 | 25 GI Pipe (WD-M0486) |
| 47 | 32 GI Bend(M-0454) |
| 48 | 110mm PVC Pipe 4kg (WD-M0004) |
| 49 | 110mm PVC Door Elbow |
| 50 | 110mm PVC Elbow (WD-M0112) |
| 51 | 110mm PVC Tee(WD-M0109) |
| 52 | 110mm PVC Cowl |
| 53 | 75mm PVC Pipe (WD-M0002) |
| 54 | 75mm PVC Door Elbow |
| 55 | 75mm PVC Elbow (WD-M0112) |
| 56 | 75mm PVC Tee (WD-M0113) |
| 57 | Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, Three pilot (indicating) lamps capacitor single phasing preventor, Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days |
| 58 | Geo Physical Charges Please Enable Macros to View BoQ information |
