Tender For Design, Detailed Engineering, Manufacture, Supply, Erection, Testing And Commissioning Of Chidambaram 230/110Kv Ais Ss With 2X160mva, 230/110Kv Auto Transformer (To Be Supplied By Tantransco), Associated Switchgears, Accessories, Control A, Chidambaram-Tamil Nadu

TDR : 54648723

Tender Notice
BOQ

32 Days Left

Chidambaram , Tamil Nadu

Tender Brief : Tender For Design, Detailed Engineering, Manufacture, Supply, Erection, Testing And Commissioning Of Chidambaram 230/110Kv Ais Ss With 2X160mva, 230/110Kv Auto Transformer (To Be Supplied By Tantransco), Associated Switchgears, Accessories, Control A

Document Fees
Refer document

EMD
₹ 6360000.0 /-

Tender Value
Refer document

Submission Date
15-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Schedule A1 - Civil
2	Schedule A2 - Supply
3	Schedule A3 - Erection, Testing and Commissioning.
4	GST Amount (Total GST Amount @18%)
5	Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.
6	Hard Gravelly soil SS 20B
7	SDR not requiring blasting
8	MR & DMR not requiring blasting
9	levelling the site
10	Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using BIFLEX-C termite 250ml for 10 lit of water etc. complete.
11	Cutting and Filling in low lying area for levelling the surface including cost of cutting the gravelly soil /soft disintegrated rock with JCB / other machineris, consolidation as per specification & with power roller including all labour lead and lift etc complete.
12	Supplying and filling river sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour lead lift etc. complete
13	Plain cement concrete 1:3:6 using 12 to 20mm HBG m/c crushed metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.
14	Plain cementconcrete 1:2:4 using 12 to 20mm HBG machine crushed metal without form work including cost of all materials, all labour, lead, lift, etc. complete.
15	Plain cement concrete 1:2:4 mix using 12 to 20mm HBG machine crushed metal with form work including cost of all materials, labour, lead, lift, etc. complete.
16	RCC M30 mix using 12 to 20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for raft concrete.
17	RCC M30 mix using 12 to20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete.
18	Upto Ground floor roof
19	First floor
20	Second floor
21	RCC M30 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Retaining wall, cable duct side walls and cover slab etc.,
22	RCC M30 mix using 12-20mm HBG machine crushed metal with form workcincluding cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Grade beam/plinth beam
23	RCC M30 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Continuous lintel concrete.
24	Ground floor
25	First floor
26	second floor
27	RCC M30 mix using 12-20mm HBG machine crushed metal including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end.
28	a) Ground floor
29	b) First floor
30	c) second floor
31	RCC M30 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof Beam concrete.
32	a) Ground floor
33	b) First floor
34	c) Second floor
35	RCC M30 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab concrete
36	a) Ground floor
37	b) First floor
38	c) Second floor
39	RCC M30 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for precast cover slab concrete.
40	RCC M30 using 12mm to 20mm HBG machine crushed metal with form work for casting of RCC fence posts including cost of all materials, lead, lift, curing in water tank etc., complete but excluding cost of steel reinforcement.
41	Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.
42	Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.
43	a) Ground floor
44	b) First floor
45	c) Second floor
46	Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, curing, lead, lift, etc., complete.
47	Plastering with CM 1:5, 12mm thick for walls including cost of all materials, curing, labour, lead, lift, etc., complete.
48	Plastering with CM 1:3, 12mm thick for ceiling, beams, sunshade including cost of all materials, curing, labour, lead, lift, etc., complete.
49	Providing weathering course with 20mm size brick jelly concrete over roof slab with lime brick jelly 32:12.5, well beaten with wooden beaters and giving rise to the required slope with 80mm average thickness and laying one course of pressed tiles of size 23x23x2cm embedded with CM 1:3, 12mm thick mixed with crude oil at 10% by weight of cement and pointed with the same oiled mortar including cost of lime, brick jelly, cement, all materials, curing, labour, lead and lift etc., and including cost of material and labour for applying water proof component over the terrace before laying brick jelly concrete, as base coating etc., complete.
50	Providing Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials, lead, lift, etc., complete.
51	Painting the ceiling with two coats of white colour Oil Bound distemper after applying two coats of Wall Putty paste of approved quality over a coat of distemper primer and making the ceiling surface smooth by scrapping with nice sand paper as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, labour, lead, lift etc., complete.
52	Painting the interior walls with two coats of ready mixed interior Emulsion paint of approved quality and colour after applying two coats of Wall Putty paste of approved quality over a coat of primer for plastic emulsion paint and making the wall surface smooth by scrapping with nice sand paper as directed by the engineer at site including cost of all materials, scaffolding, labour, lead, lift etc., complete.
53	Painting the outside walls with two coats of APEX cement paint of approved colour after applying two coats of wall Putty paste of approved quality over a coat of cement paint primer of approved quality and making the wall surface smooth by scrapping with nice sand paper as directed by the engineer at site including cost of all materials, scaffolding, labour, lead, lift etc., complete.
54	Painting with two coats of approved quality of acid proof paint over one coat of primer, over plastered wall surface in battery room including cost of all materials, labour, lead, lift, etc., complete.
55	Granolithic cement concrete M15 mix for floor finish 20 mm thick using stone chippings of 10 mm size and below, including cost of all materials, labour, lead, lift, curing, etc., complete
56	Flooring with Eurocon tiles 20mm Tk. of approved quality embedded in CM 1:3, 20mm thick and pointing with same coloured grout powder, for portico including cost of cement, all materials,curing, labour, lead, lift, etc., complete.
57	Flooring with approved joint free vitrified tiles 600x600x8mm of approved Quality, design & colour (Johnson or equivalent make) laid in CM 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, curing, etc., complete for floors other than toilets
58	Flooring with approved joint free vitrified tiles 300x300mm of approved Quality, design & colour (Johnson or equivalent make) laid in cement mortar 1:3 - 20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, curing, etc., complete for toilets
59	Daddooing walls with vitrified tiles of size 300x450mm laid in cement mortar 1:2, 10mm thick and pointing with same coloured cement using 0.4Kg/sq.m including finishing the joint and pointing flush with tile surface, cost of all materials, curing, labour, lead, lift, etc, complete
60	Supply and fixing jet black granite stone including cost of all materials labour, lead, lift, etc., complete.
61	Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608 Kg/m and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm @ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm @ 1.072 Kg/m glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door
62	Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc., complete.
63	Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials, lead, lift, etc., complete.
64	Supply and fixing in position of anodized aluminium glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.
65	Supply and fixing of Aluminium Ventilator fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials, lead, lifts, labour, etc., complete.
66	Supplying and fixing MS grills for windows and ventilators and other items using MS Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead, lift, etc., complete.
67	Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P\\"\\" or \\"S\\" trap, seat cover 15 mm dia connecting hose 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site
68	Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.
69	Supplying and fixing in position white glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc., complete.
70	Supply and fixing of white colour wash basin of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete.
71	Supplying and fixing in position 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top inlcuding cost of all materials, curing labour, leads, lifts, etc., complete.
72	Supplying and fixing in position 160 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete
73	Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete.
74	Supply and fixing 110mm dia PVC down fall pipe 4kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead, lift, etc., complete.
75	Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.
76	40 MM DIA PVC PIPE
77	32 MM DIA PVC PIPE
78	25 MM DIA PVC PIPE
79	20 MM DIA PVC PIPE
80	Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site
81	40 MM DIA
82	32 MM DIA
83	Providing and fixing wheel valve of various diameter of Gun metal leader make of best quality including cost of all materials, labour, lead and lift etc., complete.
84	32 MM DIA
85	25 MM DIA
86	20 MM DIA
87	Supplying and fixing of 15/12mm dia high quality brass chromium plated screw down tap of approved quality cost of all materials, labour, lead, lift, etc., complete for water supply arrangements to earth pits.
88	Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [MDF exterior grade] and 5mm thick machine frosted float glass (modi, saint gobine or Equivalent) using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, lift, T&P etc., complete.
89	Fabrication,Supplying and fixing in position of ladder using GI angle and 16mm dia GI rods of width 45cm including welding, cost of all materials, labour, lead, lift etc., complete.
90	Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.
91	S Type chair (Local rate)
92	Three drawer steel table with Sunmica top of size 1200x750x750mm
93	Steel side rack open type 1100x400x1200
94	Steel half bench 1200x400x600mm
95	Revolving Chair
96	Operator Table 6'x5'
97	PVC Nylon chair of approved quality
98	Providing inspection chamber with manhole cover (Heavy duty) with frame depth varying from 0.75 to 1.5m including cost of all materails lead lift etc complete.
99	Cast iron 0.45x 0.45
100	Concrete (FRC ) 0.60 x 0.60 m
101	Fabrication & erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat supported on M.S. channel ISMC height from the G.L. and 1m.
102	Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.
103	Providing false ceiling by using 12.50mm thick perfonated gypsum board in panels using 6mmGI rod suspender ,16 gauge aluminium \\"T\\" and \\"L\\" including all materials, labour, lead and lift etc., complete.
104	Supplying and fixing the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.
105	Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead and lift etc., complete.
106	Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.
107	Supplying and fixing in position of Chromium coated hand rail of 75mm pipe to height of 1000 mm and support of 25mm above square / round including cost of all materials, labour, lead, lift, T&P etc. complete.
108	Dewatering during the earthwork excavation including cost of all material,labour, lead, lift etc.,
109	Supplying, transporting fabrication, fixing of MS Rails (90 LBS) approved quality for transformer plinth in proper alignment and interconnections of the rails with flat on both ends by welding including cost of rail, all materials, labour charges, lead, lift, etc., complete, as per standard specification
110	Supplying and laying 110mm dia PVC casing pipe 6 kg/cm2 of approved make for laying cables including cost of pipe, all pipe specials, all labour, excavation, back filling, lead, lift, etc., complete.
111	Supplying and fixing the paver block of 65 mm thick to the foot path of the operational switches inside the 230/110 yard including the cost of all materials, lead, fixing charges, lift etc., complete
112	Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lift etc., complete
113	Supplying and spreading of quarry dust for yard area including cost of quarry dust, labour for consolidation, lead, lift, etc. complete.
114	Supplying and spreading of 25mm HBG metal for yard area including cost of HBG metal, labour for consolidation, lead, lift, etc. complete.
115	Assembling of template for fixing foundation bolts for towers, including cost of template and transport of template from stores to site, all labour for assembling and dismantling, lead, lift, etc., complete.
116	Assembling of template for fixing foundation bolts for SS equipment structures, including cost of template and transport of template from stores to site, all labour for assembling and dismantling, lead, lift, etc., complete.
117	Supply, Transport & fixing of GI angles for cableduct splitting the fixed end of angle for anchorage and placing in position as directed by the engineer at site including cost of angles including cost of material, all labour, lead, lift, etc. complete.
118	Providing pipe type earthing using 40mm dia GI pipe 3m length including cost of pipe, labour, fabrication of earth strip lead, lift, etc., complete.
119	Suplying and labour for unwinding, laying and tensioning of 7.5x 2.5 cm 10 guage weldmesh fencing to a height of 1.80m as per standard specification and as instructed by the engineer at site including cost of all materials, G.I binding wire, J bolt etc., all labour,lead, lift, etc. complete.
120	Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm with cover slab including cost of all materials, transport to site, labour, lead, lift, etc., complete as per standard specification.
121	Refilling the foundation pits of towers, building etc., with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.
122	Removal of surplus earth wherever necessary including transport up to 2 km away from the site, loading and unloading etc., complete
123	Engraving the name of Substation over entrance wing wall in both Tamil and English using cement plastering and providing borders, colouring with emulsion paints etc., including cost of all material, labour, lead, lift etc., complete
124	Fixing of bore well point by well qualified geologist, labour, T & P including all lead, lift, etc., complete as directed by the department engineer at site.
125	Drilling of borewell of 150 mm dia in hard rock area along with DTH rings to the depth as directed by the Engineer-in-charge including labour charges for inserting the casing pipes, assemblying the drilling hole, welding the joint if necessary, grouting the casing for pipes, etc. and transportation charges for the rig and supporting vehicles and developing the borewell, etc., complete.
126	Supply and delivery of 165 mm dia PVC 6 Kg /cm2 Casing pipe with slots and without slots as per ISI Standard Specifications and as directed by TNEB Engineers at Site.
127	Supplying and erection of three phase 3 HP Submersible multi-stage (30-40 stage) electrical motor and pump of approved ISI brand with non-return valve, adoptor, nylon rope and all related accessories as per IsI in all respect including necessary switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make panel board with Amp. & Volt meters with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification labour charge for erection of submersible pump and motor including cost of all materials, lead, lift etc, complete as driected by the department engineer at site.
128	Supplying and erection of 5HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materials, lead,lift, etc., complete as driected by the department engineer at site.
129	Supplying and erection of 3HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materials, lead, lift, etc., complete as driected by the department engineer at site.
130	Supplying & fixing of 40mm dia. U- PVC Heavy duty pipe with RED COLOUR MARK of equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.
131	Supplying & wiring with 2x4 Sq.mm.flat type submersible cable of make FINOLEX, V-GUARD or other approved ISI make for connecting the submersible motor and to the panel board and clamping with the PVC pipe with suitable clamps inside the borwell including cost of all materials, labour, lead & lift etc., complete as directed by the department engineer at site.
132	Supplying and laying 20mm dia B Class GI pipe connecting borewell to motor including earthwork excavation, refilling necessary fittings, all materials, labour, lead and lift etc., complete as directed by the department engineer at site.
133	Supplying, laying of 50mm dia 10 kg/cm2 PVC pipe with specials, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead, lift etc.., complete as directed by the department engineer at site.
134	Supply and erection of 40mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.
135	Providing laying Granular sub base on prepared sub grade using grading -1 material using IRC 53mm-2.36mm graded stone aggregate in accordance with the requirements of the specification. The material shall be laid in one or more layers as sub-base as necessary according to line grades and cross section shown in drawings or as directed by the Engineer (MORTH No’s 111,112,401,900)
136	Providing and laying Wet Mix Macadam Base course of 250 mm compacted thickness in two layers of 125 mm thick or else specified on the prepared sub-base with IRC 45-2.36mm graded stone aggregate and granular material of quality size and grading in layers as specified, including mixing in Base Mix Plant, spreading in uniform layer with motor grader and compaction with vibrating roller of 80 - 100KN static weight and fine dressing to required grade amd cross slope as directed by dept Engineer at site.
137	Providing and applying prime coat over WMM surface 6 kg of bitumen Emulsion (SS II) per 10sq.m area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as clause 503 of MORT & H specifications.
138	Providing and laying Bituminous Macadam of 50mm thickness which work shall consist of construction, in a single course of compacted crushed aggregates premixed with 60/70 grade bitumen at the rate if 3.5 percent by weight of total mix to serve as base/binder course, in accordance with the requirement of the specifications and in conformity with the drawing or as directed by the Engineer. (Using CMP, Paver).
139	Providing and applying tack coat over BM surface 2.50kg of bitumen Emulsion (RS-I) per 10sq.m area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as clause 503 of MORT & H specification.
140	Providing and laying semi dense bituminous concrete 25mm thick compacted which shall consist of construction of a single course binder/wearing course on a previously prepared bituminous base to the requirements of the specification.
141	Providing concrete road with R.C.C M20, 150 mm thick over PCC 1:3:6, 100 mm thick using 12 to 20 mm metal including cost of materials, lead, lift, curing, etc., complete.
142	Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, leads, lifts, etc., complete as per standard specification.
143	Supply and fixing RCC spun pipe NP 3 for road crossing drains wherever necessary including cost of all material, labour for laying, lead, lift etc. complete as directed by the engineer at site.
144	600mm dia
145	300mm dia
146	Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point/fan point
147	Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade.
148	Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.
149	Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point.
150	Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work.
151	Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.
152	Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.
153	Supply and fixing of 4'x16 W single industrial type LED T5 tube light 16W. fitting complete with with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)
154	4 X 28w Single Industrial type fitting
155	4x28 W Single Box type fitting
156	Supply and fixing of 4'x28 W Twin type Mirror optic suspension type fitting (Philips/Crompton/Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.
157	Supply and fixing of W.T bulk head fitting (Philips/ Bajaj/K.Lite/Crompton Greaves) suitable for CFL lamp with guard and 1No 36 W CFL bulb.
158	Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift, etc., complete, as per standard specification.
159	Supply and fixing of fancy glass shade and 18 W CFL for BH point.
160	Supply and fixing of 1400 mm (56\\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.
161	Supplying and fixing of 1200mm sweep AC ceiling fan with electronic regulator with 300mm down rod on the existing clamps of approved quality of crompton/Rally/usha/bajaj including cost of all materials, lead, lift, etc., complete.
162	Supply and fixing of 375 mm (15\\") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.
163	Supplying and fixing of Four pole RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.
164	Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).
165	Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.
166	Supplying and fixing of split Air Conditioner (3 phase -2 Ton capacity) of approved make (Dikin or equivalent) with all accessories including stabilizer with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.
167	Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make].
168	Supplying and laying of 4 core 16 Sqmm copper control cable including cost of cable, lead, lift, labour charge, etc., complete.
169	Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work, with earth connections.
170	Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.
171	Supplying and laying 25 mm dia PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.
172	Drilling 4½\\" dia hole in brick wall for providing cables for out door condensing unit including cost of all materials, lead, lift, labour charge, etc., complete.
173	110 mm dia
174	50 mm dia
175	Supplying and fixing 5/8\\" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.
176	Laying and fixing of Controflex compound in around window/ventilator for prevention of rain water.
177	Providing rain water recharge bore holes by drilling of 300 mm dia bore hole 6.00 m depth and filling the holes with hard broken stone of size 40 mm as directed by engineer at site including the cost of all materials, lead, lift, labour, T&P etc complete.
178	Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails lead lift etc complete.
179	Supplying and fixing in position of best quality mirror (600x 450mm) with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site
180	Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials, lead, lift, labour, etc., complete as directed by department Engineer at site
181	Supplying and fixing of PVC shower and Nickle control valve complete
182	Supply & fixing marble partition using white marble slabs of size 1200 mm x 600 mm x 20 mm including cost of all materials, necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site
183	Supplying, Fixing of buzzers with 5A bell push switch etc complete.
184	Providing weep holes including cost of PVC pipes 25/40 mm dia of suitable length, labour for fixing them in position etc complete
185	Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall & cable duct including cost of machinaries, labour, etc., complete
186	Brick wall
187	RCC concrete
188	Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc. including cost of all materilas, labour, lead, lift etc. complete.
189	Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing, etc., complete.
190	Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.
191	Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.
192	Supplying and fixing 100 x 75mm PVC floor trap in bath room with one pvc door bend shoe of 75mm.dia including cost of all materials, labour, lead, lift, etc., complete
193	Supplying and fixing 110mm dia PVC Bend including cost of materials, labour, lead, lift, etc., Complete
194	Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead, lift, etc., Complete
195	Supplying and fixing of two side polished 20 -30mm tk.cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete
196	Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality and colour including transport, fixing charges, etc., complete.
197	Manufacturing and fixing of pull & push type rolling shutter of 18 gauge as per standard specification and as directed by engineer in charge at site with all locking and etc. arrangement including cost of all materials, lead, lift, etc., complete.
198	Providing decorative terracotta tiles over CM 1:3,20 mm and pointed with white cement including cost of all materials , lead, lift, etc. complete.
199	Supplying and fixing of RCC jolly for head room including cost of all materials , lead, lift, etc. complete.
200	RR masonry in CM 1:5 for the retaining wall around the yard including cost of all materials,labour, lead, lift, etc., complete.
201	Flush Pointing with CM 1:3 for the RR masonry retaining wall including cost of all materials, labour, lead, lift etc complete complete.
202	Supplying, filling & spreading of good quality gravel layer by layer with proper consolidation for substation yard, low lying area, road berms, behind of abutment & wing wall including cost of all materials, labour, lead, lift etc., Complete.
203	Supplying and fixing of Name Board letter in brass including cost of all materials, lead, lift, etc., as directed by engineer and approval.
204	Supplying and fixing of Vertical Blinds (all window) and all accessarious materiales including all labour, lead, lift, etc., complete.
205	Supply and fixing 10mm thick plain glass including all materials lead lift etc., complete. (For control room).
206	Supplying and fixing fire rated (twoHoures) door as approved make including cost of all materials, lead, lift, etc., complete.
207	Labour charges for transporting aligning and erection of RCC fencing posts Viz. corner post, Intermediate post, strut post as directed by the site engineer including all labour, lead, lifts, etc., complete.
208	Supply and fixing of 50 Sq.mm GI Chain link fencing of 9 gauge with standard width of 2.40m height including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.
209	Suplying, fabricating and fixing in position of GI angle fence post with 50x50x6mm MS angle with making necessary groovs in that to fix the barbed wire fencing including cost of all materials, all labour,lead, lift, etc., complete as directed by the engineer at site.
210	Supplying, transporting, tensioning and tieing in position of barbed wire as per drawing 4 rows horizontally, including cost of binding wire, labour charges and all lead, lift, including cost of barbed wire, etc., complete.
211	Supplying and fixing in position of MS eye bolt 12mm dia of 250mm length with threading with nut and washers including cost of all materials, lead, lift, etc., Complete.
212	Fabrication, supplying and erection of M.S. grill for ornamental gate as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete.
213	Clearing light jungle with uprooting including all labour, lead, lift, etc., complete.
214	Hire charges for JCB for levelling the site including cost of hire charges,fuel charges, all labour, lead, lift, etc., complete.
215	Providing groutpocket holes including cost of all labour charges, lead, lift, etc., complete.
216	Labour Charges for uprooting and removing large Mango/Coconut/ Neem/palmyrah stumps as per standard specification complete in all respects
217	Labour Charges for uprooting and removing small Mango/Coconut/ Neem/palmyrah stumps as per standard specification complete in all respects
218	PCC 1:2:4 mix concrete with form work using 12 to 20mm machine crushed HBG metal for pre cast curb stone slab for road including cost of all materials, lead, lift, labour, etc., complete.
219	Labour charges for transporting aligning and fixing of Precast curb stone slab along the both side of road as directed by the site engineer including all labour for earth work excavation trench of required size and depth, lead, lift, etc., complete
220	Station Transformer
221	250KVA, 22 KV/433 V Station Transformer - 2No's with HG Fuse set, 22 KV LAS, GI structure materials complete set, FRP/ GI pillar box, 22 KV (1250A) Isolator -5 Nos with Insulator, consumables and all accessories.
222	Diesel Generator Set
223	250 KVA, 433 V, 3 Phase Diesel Generator Set confirming to CPCB IV+ standard with all accessories, battery, exhaust pipes with suitable thermal insulation, AMF panel, power cables, & all consumables.
224	Circuit Breakers
225	245kV, 2000 A, 50KA/3Sec, SF6 Circiut Breaker 220V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.
226	145kV, 2000 A, 40 KA, SF6 Circiut Breaker 220 V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.
227	Current Transformers
228	245kV, 2000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800-400/1A) with Terminal Connectors. G.I.support Structure, Hot Dip Galvanising Steel Foundation Bolt, 1No. Junction Box with disconnecting type terminal blocks for each 3Nos CT's and all accessories.
229	145kV, 2000 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-600-300/1A) with Terminal Connectors, G.I.Support Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt, 1No. Junction Box with disconnecting type terminal blocks for each 3Nos CT's and all accessories.
230	Potential Transformers
231	245kV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt, 1No. Junction Box with disconnecting type terminal blocks for each 3Nos PT's and all accessories.
232	145 KV, 200 VA, 110KV/ √3/110V/√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt, 1No. Junction Box with disconnecting type terminal blocks for each 3Nos PT's and all accessories.
233	Lightening Arrestors
234	216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt and all accessories.
235	96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt and all accessories.
236	Isolators
237	245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch, 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch with G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt, Support Insulator, TC and all accessories complete
238	245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break without earth switch- 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade with G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt, Support Insulator, TC and all accessories complete
239	145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch including G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt, Support Insulator, TC and all accessories complete
240	145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade including G.I.Support Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt, Support Insulator, TC and all accessories complete
241	Communication Equipments
242	Supply of ADSS 48 fibre Optic cable, with HDPE pipe, accessories including erection of ADSS. (for SAS applications).
243	Supply of Standalone 19\\" Rack Panel for accommodating 4 nos 48 Fibre optic cable with necessary fibre entry provision.
244	Digital Protection coupler including remote end SS.
245	Cabinet for Digital Protection coupler including remote end SS.
246	Telephony system (Hybrid EPAX with necessary cables for telephony (Chidambaram SS).
247	Supply of VOIP Telephones wire CAT6 shieided Cable, and associated accessories (Chidambaram SS -2, Kadalankudy SS -1, Neyveli SS -1 ).
248	Self survival stand alone VoIP Gateway, Ethernet switche(s) and assoicated materials for Voice communication (Chidambaram SS -1, Kadalankudy SS -1, Neyveli SS -1 ).
249	Telephones.
250	Necessary Cables, media converter and assossiated accessories for voice communication connectivity
251	Fibre Optic terminal equipments ( Hybrid Technology) (Chidambaram SS -1, Kadalangudy SS -1).
252	24 port Ethernet switche(s) (16Eth + 8 PoE/ PoE+) (Chidambaram-1, Kadalangudy-1, Neyveli-1, )
253	Supply of Mandatory Spares and tools for FOTE equipment as per specification.
254	Supply of Mandatory Spares and tools for DTPC equipment as per specification.
255	Supply of Mandatory Spares and tools for Hybrid EPAX and VOIP Gateway equipment as per specification.
256	Battery and Battery Chargers.
257	220V, 535 Ampere Hour (AH) battery complete set with stand, insulators and terminal connectors, Electrolyte, Hydrometer, Room Thermometer, Multimeter and all accessories.
258	220V, 100 Amps Automatic Battery charger with potential free contacts for all indications for SAS interface.
259	48 V / 250 AH Battery complete set with stand, insulators and terminal connectors, Electrolyte, Hydrometer, Room Thermometer, Multimeter and all accessories.
260	48 V / 80 A Battery Chargers Automatic Battery charger with potential free contacts for all indications for SAS interface.
261	Protection Equipments.
262	Control & Protection panel for 230KV feeder
263	Control & Protection panel for 230 KV Bus Coupler
264	230KV Busbar Protection panel - 15 circuits
265	Synchronising cum Islanding panel for 230KV Bays (SAS)
266	Control & Protection panel for 230KV/110 KV Auto Transformer
267	Control & Protection panel for 110KV feeder (6 nos feeders + 2 Nos spare feeders)
268	Control & Protection panel for 110KV Bus Coupler / Bus Section Bay
269	110KV Busbar Protection Relay panel - 21 circuits
270	Synchronising cum Islanding panel for 110KV Bays (SAS)
271	Substation Automation System for 230/110 KV SS upto 24 Electrical -bays
272	Essential Spares for SAS as per specification
273	Installation,Testing and Commissioning of SAS entire bays and future bays in the 230/110kv sub-station
274	Supply , Erection, testing and commissioning of Visual monitoring system.
275	Substation LT AC/DC Supply Accessories.
276	220 V DC Distribution Panel for 230/110 KV SS (DC under Voltage,over Voltage static relays included ).
277	48 V DC Distribution panel-Under voltage,over voltage static relays included
278	AC Distribution Panel for 230 KV SS (Under voltage,over voltage static relays included )
279	AC changeover switch 3 phase 4 pole, 415V, 200A
280	DC Change over Panel , 220V-200 A
281	DC Change over panel , 48V-100 A
282	AC Junction box ( FRP )
283	DC Inter lock box ( FRP )
284	Busbar Materials
285	75mm Dia Aluminium Bus Bar with welding sleeve
286	Double Tension String assembly with strain clamp for Twin Zebra ACSR 225 mm Spacing with 6-bolted tension fitting
287	Double Tension String assembly with strain clamp for single Zebra ACSR 225 mm Spacing with 6-bolted tension fitting
288	Bolted Type Suspension fitting for 230kV Twin Zebra
289	Bolted Type Suspension fitting for 110kV Twin Zebra
290	Zebra Conductor
291	230 KV Solid core Insulator
292	110 KV Solid core Insulator
293	11 KV 120KN Disc insulator ordinary
294	LT Power and Control Cables
295	Copper cable 20 X 2.5 mm2 Armoured
296	Copper cable 14 X 2.5 mm2 Armoured
297	Copper cable 8 X 4 mm2 Armoured
298	Copper cable 8 X 2.5 mm2 Armoured
299	Copper cable 4 X 16 mm2 Armoured
300	Copper cable 4 X 4 mm2 Armoured
301	Copper cable 4 X 2.5 mm2 Armoured
302	Copper cable 2 X 2.5 mm2 Armoured
303	4x240 Sq.mm LT UG Alu. Cable
304	4x120 Sq.mm LT UG Alu. Cable
305	4x25 Sq.mm LT UG CU . Cable
306	Aluminium Power Connectors / Clamps / Fittings with SS Bolts and Nuts.
307	Corona Bell for 75mm Bus Bar
308	Free end Clamp for 75 mm Bus Bar
309	Switch End Clamp for Zebra
310	Switch End Clamp for Twin Zebra
311	Switch End Clamp for 75 mm bus bar
312	Joint Clamp for 75 mm Bus Bar
313	PG Clamp for Zebra
314	Reducer Clamp for 75 mm Bus to Zebra
315	Seating Block for 75mm Busbar
316	Spacer Clamp for Twin Zebra with 225mm Spacing
317	T Clamp for Double Zebra to 75 mm Bus
318	T Clamp for Single Zebra to 75 mm Bus
319	T Clamp for Twin Zebra to Twin Zebra
320	T Clamp for Twin Zebra to Single Zebra
321	T clamp for Zebra to Zebra (C Type fired boltless wedge connector )
322	Galavanised Iron / MS and Steel Materials.
323	HTGS Earth wire 7/3.66 mm
324	Light section MS (Mild Steel) (other than heavy section) below14 kg/mtr
325	Earthing Materials such as MS Flats, MS Rods and MSA etc.,
326	Supply of GI Ladder type Cable tray 2.5 m Length, 0.6 m Width with coupling plate and bolt nuts.
327	Supply of GI Ladder type Cable tray 2.5 m Length, 0.45 m Width with coupling plate and bolt nuts
328	Supply of GI Ladder type Cable tray 2.5 m Length, 0.3 m Width with coupling plate and bolt nuts.
329	Supply and provision of M8,M10,M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer.
330	Switchyard Lighting Materials.
331	Yard light pole 5.5 mtr. Grouting type, stepped tubular pole with Double Bracket including cost main switch, cable etc
332	Supply of Compact make street light fitting with 150W , 240V CGL/PHILIPS or reputed make LED Lamp.
333	Supply and Erection of Lighting & Lightening Master (LLM) with accessories including LED fittings 150 W required no's meet out illumination.
334	Fire Fighting Equipments
335	Supply of mechanical foam type fire extinguisher trolly mounted 50L capacity with initial charge with complete set with hose and air induction nozzle and all accessories strictly conforming to latest issue of IS 13386/1992 with ISI certification
336	Supply of mechanical foam type portable 9 ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly conforming to latest issue of IS 10204/2001 with ISI certification
337	Supply of Trolly mounted 25 KG Capacity Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification
338	Supply of Portable 10 KG Capacity Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification
339	Supply of Portable 6 Kg Capacity Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification
340	Supply and fabrication of sand drums,(size of 580mm dia & 420 mm height)with conical cover with handle including the cost of other consumables, sand etc.,
341	Supply of Fire bucket of 10 lit. capacity made out of 14 SWG G.I Sheet painted with white & red enamal paint in side & out side respectively bottom of bucket shall be 'U' shapped out side of the bucket shall be written as Fire in English & Tamil in white enamal paint .
342	Scientific Instruments.
343	Digital True RMS Multimeter
344	Digital Leakage Current Clamp Meter (3mA –60A)
345	Hand held Digital Clamp Meter (True RMS AC/DC currents upto 2000 A)
346	Hand held Megger (1KV with R Measurement) (Rechargeable battery operated)
347	Digital Insulation Tester 5kV
348	Digital Insulation Tester 10kV
349	SWEEP FREQUENCY RESPONSE ANALYSER (SFRA) Testing Kit
350	Variable Frequency Tan delta testing kit
351	Computerised Numerical Relay test kit
352	Computerised CT/PT Analyser Testing Kit with laptop computer
353	Digital Earth Resistance Clamp Meter
354	Circuit Breaker Analyzer Multi break kit with DCRM and laptop computer
355	Primary Injection Kit (2000 Amps)
356	Transformer Winding Resistance Kit
357	Transformer Ratio Test Kit
358	CB 3 Pole Timer
359	Three phase test system for comprehensive Power Transformer Testing Kit
360	SF6 Gas leakage Detector Hand Held
361	Transformer Oil BDV Kit Megger OTS – 100AF
362	Optical Power Meter
363	Optical Source
364	Optical Time Domain Reflecto Meter (500km)
365	Digital Level Meter cum Oscillator
366	3 Phase Variac 15A
367	Analog Multimeter
368	Ferruling Machine
369	Modern Tool Box Set with Hand Drill Machine
370	LCR Meter
371	Phase Sequence Meter
372	CB due Point measurement
373	Electronic Walki talkie Hand Held - Make- Motorola ,Ahuja,Kenwood and other reputed make coverage - 5 KM with Liecence Free.
374	Other Substation Materials.
375	Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field engineer.
376	Supply and provision of 12/25x3mm flexible braided copper for electrical connection including labour for crimping at both ends.
377	Supply &Crimping of Copper Lugs of Suitable sizes as required and as directed by the field engineer.
378	Supply and fixing of LC / Key Board of size 1800 X 900 X 100 mm (Inner size) made out of 10mm Novapan Sheet with Glass doors,Lock with duplicate keys, Key Hocks and for Electrical layout and details as directed by the field engineer.
379	Supply of gauntlets
380	Supply of discharge rod, made of FRP,Four stage (4X1.5 Mtr),extendable suitablle for 230 KV,40 KA with Copper flats & 6 sq.mm cable as required by the field Engineer.
381	Supply of earth rods, made of PVC wood with copper flats & 6 sq.mm Cable as required by the field Engineer.
382	First aid box
383	Rubber Mat 2000X1000X10 mm
384	Portable Welding machine, Drilling machine-Bed Type and cutting machine
385	Supply of FRP ladder self support Extendable 20 FEET(12+8) 1NO, wall support -15 feet length-1 No and Aluminium ladder self support ladder -24-40 feet -1 No.
386	Tools kit Box with all spanner and screw drivers, allenkey and etc
387	Roof top Solar Power Plant
388	Supply of 25 kW Roof top Solar Power Plant with Bi-Polar Panels with all accessories
389	Erection, Testing and Commissioning of 6 Pole Structure using GI structure materials alongwith 250KVA, 22 KV/433 V, Station Transformer - 2 No's , HG Fuse set, 22 KV LAS, FRP / GI pillar box, 22 KV,1250 Amps Isolator - 5 Nos with Insulator complete set and all accessories all consumables.
390	Erection ,Testing and commissioning of 250 KVA, 433V, 3 phase Diesel Generator set confirming to CPCB IV+ standard with all accessories, Battery, Exhaust pipes with suitable thermal insulation, AMF Panel, Power & Control cablesand all consumables.
391	Erection, Testing and Commissioning of 245kV, 2000 A, 50KA/3Sec, SF6 Outdoor Circiut Breaker, Support structure, all accessories, SF6 Gas filling and pipe work and other consumables as directed by the field engineer.
392	Erection, Testing and Commissioning of 145kV, 2000 A, 40 KA, SF6 Outdoor Circiut Breaker , Support structure, all accessories, SF6 Gas filling and pipe work and other consumables as directed by the field engineer.
393	Erection, Testing and Commissioning of 245 KV Potential Transformers, 245 KV Current Transformers & 245 KV Capacitive Voltage Transformers with Junction box, Terminal connectors and all accessories and consumables etc. as directed by the field Engineer
394	Erection, Testing and Commissioning of 145 KV Potential Transformers, 145 KV Current Transformers & 145 KV Capacitive Voltage Transformers with Junction box, Terminal connectors and all accessories and consumables etc. as directed by the field Engineer
395	Erection, Testing and Commissioning of 216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure as directed by the field Engineer.
396	Erection, Testing and Commissioning of 96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure as directed by the field Engineer.
397	Erection, Testing and Commissioning of 245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch Isolator (Motor operated) with terminal connector and all accessories as directed by the field Engineer.
398	Erection, Testing and Commissioning of 245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break without earth switch Isolator (Motor operated) with terminal connector and all accessories as directed by the field Engineer.
399	Erection, Testing and Commissioning of 145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch Isolator (Motor operated) with terminal connector and all accessories as directed by the field Engineer.
400	Erection, Testing and Commissioning of 145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch Isolator (Motor operated) with terminal connector and all accessories as directed by the field Engineer.
401	Laying, Testing and Commissioning of ADSS 48 fibre cable with HDPE pipe for gantry tower to relay room.
402	Erection, Testing and Commissioning of Digital Protection coupler with E1 interface 8 command type) for Chidhambaram 230 KV SS SS end-4 Nos and Remote end SS - 4 Nos
403	Erection, Testing and Commissioning of EPAX - 16S/16T with all accessories.
404	Erection, Initial filling, Charge / Discharge of the Battery set, Testing and Commissioning of Battery set including two coats of painting of Acid proof paint on wooden stand and all accessories as directed by the field Engineer.
405	220 VDC, 535 AH, Battery Set with TEAK Wooden Stand and all accessories.
406	48 V 400AH Battery set with TEAK Wooden stand and all accessories.
407	Erection, Testing and Commissioning of Insulator single pole stack for supports / Underhang including all accessories and consumables etc. as directed by the field engineer.
408	230KV
409	110 KV or 66 KV
410	Erection, Testing and Commissioning of Control Panels including consumables as directed by the field engineer.
411	Simplex type / AC / DC / C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control & Relay Panels of Grid type.
412	Installation, Testing & Commissioning of complete SAS for 230KV/110KV SS comprising 33 Electrical bays, inclusive of training by a registered agency as directed by the field engineer..
413	Erection, Testing and Commissioning of 3 Phase 4 Pole 415 V 200 A, AC Change over switch of reputed make and all required accessories as directed by the field engineer.
414	Erection, Testing and Commissioning of 200/100A, 220/48V DC changeover switch of reputed make and all required accessories as directed by the field engineer.
415	Erection, Testing and Commissioning of AC FRP Junction box as directed by field engineer.
416	Erection, Testing and Commissioning of AC FRP Junction box as directed by field engineer.
417	Erection, Testing and Commissioning of Strung bus and all related hardwares, fittings, clamps including all accessories and consumables as directed by the field engineer.
418	230 KV Single Conductor Strung Bus / phase
419	230 KV Double Conductor Strung Bus / phase
420	110 KV Double Conductor Strung Bus / phase
421	Labour for the Erection of Jumper / Dropper using Moose / Zebra / Kundha / Panther Conductor including Clamps and Connectors as directed by the field engineer.
422	Laying, Testing and Commissioning of LT Alu. UG Power cable 4x25 , 4x240 & 4x120 Sq.mm in duct / trench providing Glands at both ends and terimination with necessary sockets as directed by the field engineer.
423	Laying, Testing and Commissioning of LT Power & Control cable in duct / trench / clamping on structures including clamps, Aluminium identification tags in all duct corners and all accessories and consumables as directed by the field engineer
424	Up to 8 Core
425	Above 8 Core
426	Supply and Termination of cable core end, dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).
427	Supply and Installation of cable gland of various sizes of reputed make including providing suitable holes in the panel and all required accessories etc as directed by the field engineer.
428	16/19 mm
429	22/25 mm
430	28/32 mm
431	35 mm & above
432	Fabrication & Erection of MS steel Structures using Light section Mild Steel (other than heavy section) below14 kg/mtr.
433	Fabrication & Erection of Earth mat & Earth raisers with MSR , 75 x 12 M.S. Flat, 65x 65x 6 mm SA, 60 x 10mm and 50X8 MM MS Flat, GI Bolts & Nuts as per the approved diagram including painting of joints using anti corrosive paint as directed by the field Engineer.
434	Labour for excavation & refilling of earth/ trunch for earth mat ,cable,etc of any size / of average width of 0.3M and average depth of 0.8 M for earth mat below fixed yard level in Semi density rock soil as directed by the field Engineer.
435	Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits and filling of Earth-pit with chemical compounds mixd with site soil as directed by the field Engineer.
436	Erection of Cable trays (2.5 M length ) in cable trench including all accessories.
437	Erection of Switch Yard lighting pole of 5.5Mts. height alongwith Double bracket with 150W, 240V Street Light Fitting and Junction Box, Cable and Painting with 1 coat of Red oxide and 2 coat of Aluminium paint as directed by the field Engineer.
438	Labour charges for painting the earth raisers with Green Enamel Painting including cost of paint (Dulex, Asian & Berger preferred) and all consumables as directed by the field engineer
439	Supply and erection of Vinyl Sticker cutting / Printing on Vinyl Sticker / Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.
440	Supply and fixing of Godrej 6 lever navtol lock with triplicate keys for A.B Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.
441	Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer.
442	75 mm (1 length)
443	Labour charges for writing details in any finished surface / board including cost of enamel paints and other consumables as directed by the field engineer.
444	Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field engineer.
445	Erection of 25 kW Roof top Solar Power Plant with Bi-Polar Panels with all accessories Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Electrical Industry Tenders

Transformers Tenders

Transformer Supply Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Design, Detailed Engineering, Manufacture, Supply, Erection, Testing And Commissioning Of Chidambaram 230/110Kv Ais Ss With 2X160mva, 230/110Kv Auto Transformer (To Be Supplied By Tantransco), Associated Switchgears, Accessories, Control A, Chidambaram-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Design, Detailed Engineering, Manufacture, Supply, Erection, Testing And Commissioning Of Chidambaram 230/110Kv Ais Ss With 2X160mva, 230/110Kv Auto Transformer (To Be Supplied By Tantransco), Associated Switchgears, Accessories, Control A, Chidambaram-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us