|
| 1 | I. WIRING FOR FIRE-PUMP HOUSEWiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as reqd. 'Group C' |
| 2 | Wiring for light / power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for Circuit / Sub Main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 4 | b) 4 x 6 sq.mm + 2 x 6 sq.mm earth wire |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch |
| 6 | b) 3 pin 5/6 A socket outlet |
| 7 | c) 15/16 A switch |
| 8 | d) 6 pin 15/16 A socket outlet |
| 9 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.a) 6 Module |
| 10 | Supplying of pre-wired for LED, power saving Decorative box type LED tube Batten fittings, 4' powder coated for similar to BAJAJ IVORA® LED BATTEN and 4'x 25 watts High efficiency, power saving LED Batten Cat No. 830258 Bajaj IVORA® LED Batten 25W CDL or its equivalent etc., as required. |
| 11 | Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 12 | Supplying of Exhaust fan of size 380 mm sweep, 1400 rpm with protective bird guard (similar to BAJAJ SUPREME PLUS, Exhaust fan) or its equivalent etc as required. |
| 13 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.a) Upto 450 mm sweep |
| 14 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required |
| 15 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required |
| 16 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 17 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)a) 4 way (4 + 12), Double Door |
| 18 | Supplying and fixing 5 amps to 32 amps rating, 240 /415 volts, 'C' curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single Pole |
| 19 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 Amps |
| 20 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as requireda) 63 Amps |
| 21 | Supplying and fixing on wall of Street Light luminaries 25 Wattage, with pressure die-cast Al Housing i/c Clamping arrangement with GI Pipe of suitable size of at least 1 mtr length etc. (Equivalent to HAVELLS ENDURA SUNDOWN) including Clamping arrangement with GI Pipe etc as required. |
| 22 | II. FIRE HYDRANT SYSTEMSupplying, installation, testing and Commissioning of Kirloskar make GK 80/32B Centrifugal top discharge End Suction Pump having standard material of construction fitted with Bronze Impeller coupled to Kirloskar make 4R1080T Model 68 HP @ 2150RPM diesel engine driven main fire pump, complete in all respect, as required water cooled with radiator, auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10m outside pump house, Pressure guage etc. as required. M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5Kgf/cm2 pressure at the highest /farthest point. |
| 23 | Supplying ,installation, testing and Commissioning of Kirloskar make Model DB 80/20xe Centrifugal top discharge End Suction Electric driven Main Fire pump having standard materials with Bronze Impeller Coupled to Kirloskar make 45 KW/60 HP @ 2900 RPM TEFC induction motor suitable for automatic operation and all accessories, Pressure guage, horizontal foot mounted type with Class-'F' insulation, conforming to IS-3250. (c)M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 24 | Supplying ,installation, testing and Commissioning of Jocky pressurization pump suitable for automatic operation and consisting of following, complete in all respects, as required :Jockey pump set Kirloskar Make CPHM 25/26A coupled with Kirloskar Make 7.5 kW / 10 HP @ 2900 RPM TEFC induction motor with stainless steel shaft, mechanical seal conforming to IS: 1520 suitable for operation on 415 volts 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure with all accessories, Pressure Guage etc as required. |
| 25 | Fabrication, supply , installation testing & commissioning of Electrical control FIRE PANEL of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet compartmentalized with hinged lockable doors, dust and vermin proof , powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect , suitable for main Diesel fire pump, Jockey pump & Electric Motor driven pump set complete as per CPWD specification with following in coming and Outgoing , suitable for operation an 415V, 3 phase , 50Hz Ac supply with enclosure protection class IP 42 as required, complete as per specification and as directed by the E-in C as required. |
| 26 | III. PIPES & ACCESSORIESProviding Laying, testing & commissioning of 'B' Class heavy duty MS pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolta, gaskets etc. in ground including welding excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (a ) 150 mm dia |
| 27 | Providing Laying, testing & commissioning of following sizes of 'B' Class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding fittings like elbows, tees, flanges, tapers, nuts bolta, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: (a) 200 mm dia (wall thickness =6.3mm) |
| 28 | (b) 50 mm dia |
| 29 | (c) 40 mm dia |
| 30 | Supplying and Installation of Stand Post Yard Hydrant with 63 mm dia ISI marked Double headed instantaneous female Brass/Gunmetal Hydrant valve mounted on 80 mm NB Stand Post with 1.0 to 1.2 Mtr above ground with suitable size Flange, Tee, reducer gasket etc., complete with all accessories and conforming to IS 5290 (type-A) with blank Brass/Stainless Steel cap and chain etc., as required. |
| 31 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washes, gaskets conforming to IS 13095 of following sizes etc., as required:a) 40 mm dia |
| 32 | b) 50 mm dia |
| 33 | c) 150 mm dia |
| 34 | d) 200 mm dia |
| 35 | Supplying and fixing 63mm dia, 30 m long newage RRL hose pipe reel with 63mm dia male and female coupling duly bound with GI wire, river etc. confirming to IS 636(type- A) etc., as required |
| 36 | Supplying and fixing of fire brigade connection of cast iron body with Gunmetal male instantaneous inlet coupling complete with cap and Chain as required for suitable dia pipe connection conforming to IS 904 as required. (a) 150 mm dia 4-way Fire Brigade inlet (gunmetal) |
| 37 | Supplying and installation of Fire Hose Points (FHP) having the following accessories accomodated in a FRP Fire Hose Box of size 750mm X 600mm X 250mm with lock and key arrangement. (i) Single Headed Brass Hydrant Valve. (ii) 63mm dia x 15 M long Fire Hose - 02 Nos. (iii) Brass Branch pipe (IS 903) (iv) Pressure Guage, (v) Hose Reel system as per IS 884 with all accessories including marking and fluorescent snickering etc as required and as directed by the E-in-C. |
| 38 | SITC of Stand Post Water and Fire Foam Monitors of 63 mm size having horizontal rotation 360° in either direction and vertical rotation of min 135° ( 135° upwards and 135° downwards) with SS Foam tank of 400 litres complete with connections and testing etc., as required. |
| 39 | Supplying and Installation of Non-Return Valve (NRV) of C.I/ Water Check Valve of the following sizes with all accessories like flange, Tee etc., as required and as directed by the E-in-C.a) 150 mm dia |
| 40 | b) 40 mm dia |
| 41 | Supplying and Installation of M.S/C.I Double Flanged Sluice Valve, Hand wheel operated for Isolation of main Fire Pipe Line during maintenance etc of the following sizes with all accessories etc. as required. (a) 150 MM Gate/Sluice - Isolation Valve |
| 42 | Supplying and Installation of 200 mm dia Y- Junction strainer for main pump inlet with all the accessories and connections etc. as required. |
| 43 | IV. SMOKE DETECTION & FIRE ALARM SYSTEM Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to print-out log and facility to have seamless integration with analog /digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications(a) Ten Loop Panel. |
| 44 | Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required. |
| 45 | Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required |
| 46 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 47 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required |
| 48 | Supply, Installation, testing and commissioning of Addressable Auto-Dialer and Wireless system. |
| 49 | Supplying & Laying of 2 X 1.5 sqmm fire alarm armoured cable, 650/1100V rated with annealed copper conductor having XLPE insulation, Cores Laid Up, PVC Inner sheathed, Armoured (Glavanised Steel strip)industrial cable conforming to IS 7098 (Part 1) 1988. Similar to Make: Havells Industrial Cable or its equivalent etc., as required. Please Enable Macros to View BoQ information |
