Tender For Balance Work Construction Of Block Development Office Building Dharmpur At Solan. (Sh:- Balance Electrical Work Panel, Lighting Arrestor Etc.), Dharmpur-Himachal Pradesh

TDR : 54646742

Tender Notice
BOQ

5 Days Left

Dharmpur , Himachal Pradesh

Tender Brief : Tender For Balance Work Construction Of Block Development Office Building Dharmpur At Solan. (Sh:- Balance Electrical Work Panel, Lighting Arrestor Etc.)

Document Fees
₹ 2000 /-

EMD
₹ 31220.0 /-

Tender Value
₹ 15.61 Lakhs /-

Submission Date
20-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with 3 nos. blades,30 cm long down rod, 2 nos, canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, Service Value (CMM/W)minimum 6.85, Air delivery minimum 215 CMM,350 PRM (tolerance as per IS:374-2019),THD less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers temperature rise-75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC supply, earthing etc. complete as required.
2	Supply, Installation, testig and commissioning of following capacity geyser ISI marked having S.S. tank and outer ABS body BEE 5 star rating, 8.0 bar pressure,Vertical type i/c plug top complete with connection, industrial top, inlet and outlet water piping complete etc.reqired.
3	25 liters
4	Supply, Installation, testig and commissioning of 600 x 600mm LED panel (Nomial dimension) 36 watts Surface/ Recess Type Metallic CRCA Powder coated Housing Hing efficiency Diffuser cover having minimum lumen efficacy as 100 lumens/ watt complete with accessories as required.
5	Round shaped recessed LED Down light 12/15 watt having minimum lumen efficacy as 100 lumens/watt complete with accessories as required.
6	SITC of 250 mm sweep Ventilating fan with plastic body and louvers i/c connection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as required at site. (M/S HAVELLS/Crompton Greaves/Usha/ khaitan/Bajaj/ Orient).
7	Extruded Aluminium 2 ft LED Batton 10 watt having minimum lumen efficacy as 100 lumens/watt with accessories as required.
8	Extruded Aluminium 4 ft LED Batton 20 watt having minimum lumen efficacy as 100 lumens/watt with accessories as required.
9	Supply,Installation,testing and commissioning 300mm x 300mm LED panel (Nominal dimension) 24 watts Surface/Recess Type CRCA powder coated housing hing efficiency diffuser cover having minimum lumen efficacy as 100 lumens/watt complete with accessories as required.
10	LED Street Light/Flood Light luminaire 50 w with epoxy poder caated pressure die cast aluminium housing & acrylic/Polycarbonate cover with gi Bracket.
11	Supply, instaletion ,testing and commissioning of following capacity geyser ISI marked having S.S.Tank and outer ABS body BEE 5 star rating ,Vertical type i/c plug top complete with connection ,industrial top ,inlet and outer water piping complete etc. as required. 3 Litres
12	Supplying, installation, testing & commissioning of following Indoor type, compartmentalized and sectionalized cubicle panel of size 1.85 m x 1.875m x 600mm deep, fabricated from cold rolled CRCA sheet steel fo 2 mm thick, having vibration free structure chemically treated surface with seven tank process before painting, epoxy powder coated after two coats of anti-rust primer, making earth connections by providing Aluminium earth strip of minimum size 25 x 5 mm thick all along horizontal run of the panel suitable for operation on 3 phase 415 V 50 HZ AC supply i/c 400 Amp TPN Aluminium Busbar suitable for with standing fault level of 31 MVA for 1 Sec with heat shrinkable coulred sleeves i/c SMC/DMC bus bar supports at required interval.s (Current density shall be maximum 1.3 A/sqmm), providing and fixing the following switchgear to be mounted thereon complete with gaskets, interconnections and earthing with suitable size PVC insulated FRLS copper wire. The panel shall be dust free, vermin proof and totally enclosed with Degree of protection of IP 42 as per IS 2147, with suitable cable/busbar alleys and shall be mounted on MS chnnels of size not less than 50 X 50 X 6 mm iron frame on floor etc as per specification complete as required. Gland plates should be minimum 3 mm thick at top and bottom LED cluster indication lamp shall be provided on each compartment (incomer/outgoing/bus coupler) for ON, OFF and TRIP i.e. Providing and fixing following accessories in above cubicle panel board including drilling holes in cubicle panel, making connection, etc. as required.
13	INCOMING
14	250A 4P On Load Manual Changeover Switch-Disconnector with 2 C/O, Frame-3, Type: CO3-250, Open Execution
15	250 A 3P 25KA MCCB TM Release, Type: DN1-250C, 415 V AC, 50 Hz
16	Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB
17	Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
18	Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
19	Blue Gen Next Pro LED Indicator 22.5mm, Voltage: 240V AC
20	VAF + PF Meter, 3Ph, Parameters: VLL, VLN, A,F,PF, On Hrs, RPM, Apeak, Acc. CL: 1, Aux Supply: 80-300V AC/DC, Size: 96X96, Model: 4110
21	250/5A 15VA Resin Cast Acc. Cl: 1 Rectangular Type Current Transformer, Size: 55x20mm
22	6A 1P 10kA, C-Curve MCB
23	4 Sq.mm Disconnecting Terminal (Std. Color), Type: KLTD M4NV
24	End Plate (Std. Color), Type: KPLD4 for Terminal: KLTDM4
25	Slide Clamps with fixing Screws, Type: SCUN (POLYAMIDE 6.6)
26	32A Neutral Link, Channel Mounting, Color: Black/Grey
27	OUTGOING
28	160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz
29	Spreader Terminals- 3 Pole (Set of 6) for DN1, DN2-250 MCCB
30	Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
31	Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
32	Blue Gen Next Pro LED Indicator 22.5mm, Voltage: 240V AC
33	VAF + PF Meter, 3Ph, Parameters: VLL, VLN, A,F,PF, On Hrs, RPM, Apeak, Acc. CL: 1, Aux Supply: 80-300V AC/DC, Size: 96X96, Model: 4110
34	160/5A 15VA Resin Cast Acc. Cl: 1 Ring Type Current Transformer, ID: 30mm
35	6A 1P 10kA, C-Curve MCB
36	4 Sq.mm Disconnecting Terminal (Std. Color), Type: KLTD M4NV
37	End Plate (Std. Color), Type: KPLD4 for Terminal: KLTDM4
38	Side Clamps with Fixing Screws, Type: SCUN (POLYAMIDE 6.6)
39	32A Neutral Link, Channel Mounting, Color: Black/Grey
40	O/G'S MCCB 160A 3P
41	160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz
42	Spreader Terminals-3 Pole (Set of 6) for DN1, DN2 -250 MCCB
43	O/G's MCCB 100A 3P
44	100A 3P 25kA MCCB TM Release, Type: DN0-100C, 415V AC, 50Hz
45	Spreaser Terminals - 3 Pole (Set of 6) for DN0-100MCCB
46	STREET LIGHT MCB 63A 4P
47	63A 4P 10kA, C-Curve MCB
48	20A 2P 10kA, C-Curve MCB
49	6A 1P 10kA, C-Curve MCB
50	Astro Time Switch Mini-2 Mod, 110-240V AC
51	AC3: 40A AC1: 50A 3P Power Contactor, Coil: 240V AC, Type: MO 40
52	Earthing and Lightning Conductor
53	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
54	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
55	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
56	Providing and fixing 25mmx5mm GI strip on surface or in recess for connections etc as required
57	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
58	Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mmdia 6mm thick G.I. base plate including holes etc. complete as required.
59	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc as required.
60	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
61	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
62	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
63	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Balance Work Construction Of Block Development Office Building Dharmpur At Solan. (Sh:- Balance Electrical Work Panel, Lighting Arrestor Etc.), Dharmpur-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with 3 nos. blades,30 cm long down rod, 2 nos, canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, Service Value (CMM/W)minimum 6.85, Air delivery minimum 215 CMM,350 PRM (tolerance as per IS:374-2019),THD less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers temperature rise-75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC supply, earthing etc. complete as required.
2	Supply, Installation, testig and commissioning of following capacity geyser ISI marked having S.S. tank and outer ABS body BEE 5 star rating, 8.0 bar pressure,Vertical type i/c plug top complete with connection, industrial top, inlet and outlet water piping complete etc.reqired.
3	25 liters
4	Supply, Installation, testig and commissioning of 600 x 600mm LED panel (Nomial dimension) 36 watts Surface/ Recess Type Metallic CRCA Powder coated Housing Hing efficiency Diffuser cover having minimum lumen efficacy as 100 lumens/ watt complete with accessories as required.
5	Round shaped recessed LED Down light 12/15 watt having minimum lumen efficacy as 100 lumens/watt complete with accessories as required.
6	SITC of 250 mm sweep Ventilating fan with plastic body and louvers i/c connection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as required at site. (M/S HAVELLS/Crompton Greaves/Usha/ khaitan/Bajaj/ Orient).
7	Extruded Aluminium 2 ft LED Batton 10 watt having minimum lumen efficacy as 100 lumens/watt with accessories as required.
8	Extruded Aluminium 4 ft LED Batton 20 watt having minimum lumen efficacy as 100 lumens/watt with accessories as required.
9	Supply,Installation,testing and commissioning 300mm x 300mm LED panel (Nominal dimension) 24 watts Surface/Recess Type CRCA powder coated housing hing efficiency diffuser cover having minimum lumen efficacy as 100 lumens/watt complete with accessories as required.
10	LED Street Light/Flood Light luminaire 50 w with epoxy poder caated pressure die cast aluminium housing & acrylic/Polycarbonate cover with gi Bracket.
11	Supply, instaletion ,testing and commissioning of following capacity geyser ISI marked having S.S.Tank and outer ABS body BEE 5 star rating ,Vertical type i/c plug top complete with connection ,industrial top ,inlet and outer water piping complete etc. as required. 3 Litres
12	Supplying, installation, testing & commissioning of following Indoor type, compartmentalized and sectionalized cubicle panel of size 1.85 m x 1.875m x 600mm deep, fabricated from cold rolled CRCA sheet steel fo 2 mm thick, having vibration free structure chemically treated surface with seven tank process before painting, epoxy powder coated after two coats of anti-rust primer, making earth connections by providing Aluminium earth strip of minimum size 25 x 5 mm thick all along horizontal run of the panel suitable for operation on 3 phase 415 V 50 HZ AC supply i/c 400 Amp TPN Aluminium Busbar suitable for with standing fault level of 31 MVA for 1 Sec with heat shrinkable coulred sleeves i/c SMC/DMC bus bar supports at required interval.s (Current density shall be maximum 1.3 A/sqmm), providing and fixing the following switchgear to be mounted thereon complete with gaskets, interconnections and earthing with suitable size PVC insulated FRLS copper wire. The panel shall be dust free, vermin proof and totally enclosed with Degree of protection of IP 42 as per IS 2147, with suitable cable/busbar alleys and shall be mounted on MS chnnels of size not less than 50 X 50 X 6 mm iron frame on floor etc as per specification complete as required. Gland plates should be minimum 3 mm thick at top and bottom LED cluster indication lamp shall be provided on each compartment (incomer/outgoing/bus coupler) for ON, OFF and TRIP i.e. Providing and fixing following accessories in above cubicle panel board including drilling holes in cubicle panel, making connection, etc. as required.
13	INCOMING
14	250A 4P On Load Manual Changeover Switch-Disconnector with 2 C/O, Frame-3, Type: CO3-250, Open Execution
15	250 A 3P 25KA MCCB TM Release, Type: DN1-250C, 415 V AC, 50 Hz
16	Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB
17	Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
18	Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
19	Blue Gen Next Pro LED Indicator 22.5mm, Voltage: 240V AC
20	VAF + PF Meter, 3Ph, Parameters: VLL, VLN, A,F,PF, On Hrs, RPM, Apeak, Acc. CL: 1, Aux Supply: 80-300V AC/DC, Size: 96X96, Model: 4110
21	250/5A 15VA Resin Cast Acc. Cl: 1 Rectangular Type Current Transformer, Size: 55x20mm
22	6A 1P 10kA, C-Curve MCB
23	4 Sq.mm Disconnecting Terminal (Std. Color), Type: KLTD M4NV
24	End Plate (Std. Color), Type: KPLD4 for Terminal: KLTDM4
25	Slide Clamps with fixing Screws, Type: SCUN (POLYAMIDE 6.6)
26	32A Neutral Link, Channel Mounting, Color: Black/Grey
27	OUTGOING
28	160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz
29	Spreader Terminals- 3 Pole (Set of 6) for DN1, DN2-250 MCCB
30	Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
31	Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
32	Blue Gen Next Pro LED Indicator 22.5mm, Voltage: 240V AC
33	VAF + PF Meter, 3Ph, Parameters: VLL, VLN, A,F,PF, On Hrs, RPM, Apeak, Acc. CL: 1, Aux Supply: 80-300V AC/DC, Size: 96X96, Model: 4110
34	160/5A 15VA Resin Cast Acc. Cl: 1 Ring Type Current Transformer, ID: 30mm
35	6A 1P 10kA, C-Curve MCB
36	4 Sq.mm Disconnecting Terminal (Std. Color), Type: KLTD M4NV
37	End Plate (Std. Color), Type: KPLD4 for Terminal: KLTDM4
38	Side Clamps with Fixing Screws, Type: SCUN (POLYAMIDE 6.6)
39	32A Neutral Link, Channel Mounting, Color: Black/Grey
40	O/G'S MCCB 160A 3P
41	160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz
42	Spreader Terminals-3 Pole (Set of 6) for DN1, DN2 -250 MCCB
43	O/G's MCCB 100A 3P
44	100A 3P 25kA MCCB TM Release, Type: DN0-100C, 415V AC, 50Hz
45	Spreaser Terminals - 3 Pole (Set of 6) for DN0-100MCCB
46	STREET LIGHT MCB 63A 4P
47	63A 4P 10kA, C-Curve MCB
48	20A 2P 10kA, C-Curve MCB
49	6A 1P 10kA, C-Curve MCB
50	Astro Time Switch Mini-2 Mod, 110-240V AC
51	AC3: 40A AC1: 50A 3P Power Contactor, Coil: 240V AC, Type: MO 40
52	Earthing and Lightning Conductor
53	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
54	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
55	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
56	Providing and fixing 25mmx5mm GI strip on surface or in recess for connections etc as required
57	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
58	Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mmdia 6mm thick G.I. base plate including holes etc. complete as required.
59	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc as required.
60	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
61	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
62	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
63	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Please Enable Macros to View BoQ information

Tender For Balance Work Construction Of Block Development Office Building Dharmpur At Solan. (Sh:- Balance Electrical Work Panel, Lighting Arrestor Etc.), Dharmpur-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us