|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 8 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 10 | Granite stone slab colour black, Cherry/Ruby red |
| 11 | Area of slab upto 0.50 sqm |
| 12 | Area of slab over 0.50 sqm |
| 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 14 | Granite work |
| 15 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 16 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete |
| 17 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 18 | Decorative veneer facings of approved manufacture |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 20 | Second class teak wood |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 22 | Float glass panes |
| 23 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 25 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 27 | 25 mm dia (heavy type) |
| 28 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 29 | 40 mm |
| 30 | Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. |
| 31 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 32 | Double strip (horizontal type) |
| 33 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge. |
| 34 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 35 | 1.0 mm thick |
| 36 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 37 | With 2nd class teak wood beading 62x19 mm |
| 38 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sadh and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC etruded galzing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fastners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile and frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardwre and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh/Glazing of plain/toughned/laminated/doubel glass unit with /without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separtely.Note: Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for :i) Sites with basic wind speed >45 m/sec as per IS 875- Part 3ii) Sites with structure height more than 20m for all wind speeds. |
| 39 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium Channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). |
| 40 | Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, zince ally (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body.Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (74mm & above). (Height upto 2.5 metre). |
| 41 | Fixed window / ventilator without mullion / transom.Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre) |
| 42 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 43 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. |
| 44 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 45 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 46 | Hot finished welded type tubes |
| 47 | Providing and fixing bolts including nuts and washers complete |
| 48 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 49 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 50 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 51 | 10 x 80 mm |
| 52 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 53 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 54 | 25 mm thick |
| 55 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 56 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 57 | Double charge vitrified tile polished finish of sizeSize of Tile 800 x 1600 mm |
| 58 | Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mm |
| 59 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 60 | 110 mm diameter |
| 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 62 | Bend 87.5° |
| 63 | 110 mm bend |
| 64 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 65 | 110 mm |
| 66 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 67 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 68 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 69 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 70 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 71 | Gutter (600 mm over all girth) |
| 72 | 12 mm cement plaster of mix : |
| 73 | 1:6 (1 cement: 6 coarse sand) |
| 74 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 75 | 1:6 (1 cement: 6 coarse sand) |
| 76 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 77 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: |
| 78 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 79 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 80 | Two or more coats on new work |
| 81 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 82 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 83 | Two coats |
| 84 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 85 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 86 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre |
| 87 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 88 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 89 | One or more coats on old work |
| 90 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion.This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 91 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
| 92 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 93 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 94 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 95 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall |
| 96 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 97 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 98 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 99 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 100 | In cement mortar |
| 101 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 102 | Of area 3 sq. metres and below |
| 103 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 104 | For thickness of tiles 10 mm to 25 mm |
| 105 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 106 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
| 107 | Thickness above 10 mm up to 25 mm |
| 108 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 109 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 110 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 111 | Providing and laying matt finished vitrified tile of size 100x100x16 mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. |
| 112 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 113 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 114 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 115 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 116 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 117 | Kitchen sink with drain board |
| 118 | 510x1040 mm bowl depth 225 mm |
| 119 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 120 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 121 | Flexible pipe |
| 122 | 32 mm dia |
| 123 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 124 | Providing and fixing toilet paper holder : |
| 125 | C.P. brass |
| 126 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 127 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 128 | 20 mm nominal outer dia Pipes |
| 129 | 25 mm nominal dia Pipes |
| 130 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 131 | 15 mm nominal bore |
| 132 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 133 | 15 mm nominal bore |
| 134 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 135 | 15mm nominal bore |
| 136 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 137 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 138 | Upto 5mm depth and 5 mm width |
| 139 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 140 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 141 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 142 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with olymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 143 | 25 mm average thickness in 2 layers |
| 144 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 145 | Frame size 65 x 125 mm |
| 146 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 147 | 30 mm thick |
| 148 | Providing and fixing CP Brass Concealed body for high flow Divertor of JQUAR make Cat No. ALD-079N with Single lever exposed parts Kit CAT No. ARI-CHR-39079NK or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 149 | Provding and fixing CP single lever basin mixer W/o pop up waste system JAQUAR make CAT No. FLP-CHR-5005NB or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 150 | Providing and fixing Toilet roll holder of JAQUAR make CAT No. AKP-35753PS or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 151 | Providing and fixing CP Brass bottle trap of JAQUAR make CAT No. ALD-769L300x190 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 152 | Providing and fixing C.P. Brass Overhead Shower of JAQUAR make CAT No. OHS-1755 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 153 | Providing and fixing CP Brass telephone Hand Shower round shape JAQUAR make CAT No. HSH-1937 with Premium wall bracket CAT No. SHA-555 with Flexible Tube 12mm dia 1.5 mtr long CAT No. SHA-549D12 & Vignette Prime bath tub spout with button CAT No. SPJ-85463 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 154 | Providing and fixing Rimless single piece W.C. of JAQUAR make CAT No. ONS-WHT-10853S300UFSM or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 155 | Providing and fixing Wall Mounted WC of JAQUAR make CAT No. 39951UFSM with fittings like Concealed Cistern of JAQUAR make Cat No. JCS-WHT-2400 Plate Fusion JCP-CHR-292415 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 156 | Providing and fixing Towel Ring of JAQUAR make CAT No. ACN-1121BN or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 157 | Providing and fixing Glass Corner of JAQUAR make CAT No. ACN-1173 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 158 | Providing and fixing of Glazed vitrified Digital Wall Tiles (Matte/Gloss/Wooden finish) of size 300x600 mm conforming to IS: 15622 (Thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skiriting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 (cement:3 coarse sand) and jointing with grey cement slurry @ 3.30 kg. per sqm. including pointing in white cement mixed with pigment of matching the shade complete. |
| 159 | Providing and fixing of Glazed vitrified Digital Wall Tiles (Matte/Gloss/Wooden finish) of size 600x1200 mm conforming to IS: 15622 (Thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skiriting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 (cement:3 coarse sand) and jointing with grey cement slurry @ 3.30 kg. per sqm. including pointing in white cement mixed with pigment of matching the shade complete. |
| 160 | Providing and fixing C.P. Brass Glass Shelf 600 mm (with brass brackets) of JAQUAR make CAT No. AKP-35771P or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 161 | Providing and fixing Towel Rack 600mm long with lower hangers of JAQUAR make CAT No. AKP-35781PS or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 162 | Providing and fixing CP Brass Sink Mixer with regular spout T/M (Swing Spout) of JAQUAR make CAT No. ARI-CHR-39309 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 163 | Providing and fixing C.P. Brass Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook of JAQUAR make CAT No. ALD-CHR-577 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 164 | Providing and fixing Counter wash basin of size 615x415x150 mm of JAQUAR make CAT No. DRS-WHT-37601 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 165 | Providing and fixing Table top wash basin of size 495x395x150 mm of JAQUAR make CAT No. JDS-WHT-25911 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 166 | Providing and fixing C.P. Brass Angular Stop Cock with flange (Angular stop cock) of JAQUAR make CAT No. CQT-CHR-23059 i/c. making all connection complete as per direction of Engineer-in-charge. |
| 167 | Providing and fixing C.P. Brass Soap Dispenser of JAQUAR make CAT No. ACN-CHR-1137N i/c. making all connection complete as per direction of Engineer-in-charge. |
| 168 | Providing and fixing C.P. Brass Soap Dish of JAQUAR make CAT No. AKP-35731P i/c. making all connection complete as per direction of Engineer-in-charge. |
| 169 | Providing and fixing C.P. Brass waste coupling of JAQUAR make CAT No. ALD-CHR-705L130 i/c making all connection complete as per direction of Engineer-in-charge. |
| 170 | Providing and fixing C.P. Brass Shower Arm 375 mm Long of JAQUAR make CAT No. SHA-CHR-455L400 i/c. making all connection complete as per direction of Engineer-in-charge. |
| 171 | Providing and fixing of white metal of chromium finished handles of of approved quality & make with necessary screws etc all complete. 100 mm |
| 172 | Providing and fixing of white metal handles of approved quality & make with necessary screws etc all complete. 200 mm |
| 173 | Providing and fixing of white metal handles of approved quality & make with necessary screws etc all complete. 150 mm |
| 174 | Providing and fixing ISI marked Bright finish S.S. tower bolt , (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 175 | Providing and fixing ISI marked Bright finish S.S. tower bolt , (Barrel type) with necessary screws etc. complete : 200x10 mm |
| 176 | Providing and fixing cupboard shutter with 18 mm thick one side raw and other side balancing lamination factory pressed BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately). |
| 177 | Providing and fixing 18 mm thick both side balancing lamination factory pressed BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand boxes,shelves,racks, almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 178 | Providing and fixing 8mm thick both side balancing laminated BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. |
| 179 | Providing and fixing Looking Mirror of beveled edge of different sizes of superior glass (of approved quality) complete fixed to wooden cleats with C.P. brass screws and washers complete |
| 180 | Providing & fixing White Metal with black matt finished polish or required shade mortice latch and lock of GODREJ make CAT No. NEH 15 2C, with six levers including double sided cylinder and a pair of same material and shade lever handles of approved quality i/c all fittings complete as per direction of Engineer-in-charge. |
| 181 | Providing and fixing 5 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 182 | Providing and fixing HDF wooden laminated flooring 12 mm thick of AC-5 HDF grade with 0.20 mm thick Polyurethane Sheet and 2mm thick PU foam as per approved colour, shade and design complete as per direction of Engineer-in-Charge. |
| 183 | Providing and fixing 50mm profile made of 12mm thick wooden laminated flooring complete as per dirction of Engineer-in-Charge. |
| 184 | Providing and fixing 100mm skirting made of 12mm thick wooden laminated flooring and fixed with all necessary etc complete as per dirction of Engineer-in-Charge. |
| 185 | Providing and fixing 1mm thick 16 to 19mm wide PVC high gloss edge binding tape of approved quality for Cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 186 | Providing and fixing Stainless Steel Legs (100mm) in Cup boards and wherever necessary with necessary screws etc. complete as per direction of Engineer-in-charge. |
| 187 | Providing and fixing Stainless Steel Back rubber door stopper, necessary brass screws etc. to suit shutter thickness all complete as per direction of Engineer-in-charge. |
| 188 | Providing & fixing Sliding Cupboard channel upto 3metre in length with Runner Set including all necessary screws & fittings etc complete as per direction of Engineer-in-charge. |
| 189 | Providing and fixing 18mm thick White Crystalline Nano Stone mirror polished, premoulded and prepolished (Black/White/Off white/Grey & Zebra black & other required color) (premoulded and prepolished) machine cut for Kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 18mm thick ply board base with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Stone of any colour and shade |
| 190 | Providing and fixing 9mm thick WPC Louvers with L&T profile (WPC) of D'Spaze make or equivalent of approved colour & design in wall panelling/cladding with necessary screws and adhesive etc all complete as per direction of Engineer-in-charge. (Payment of aluminium frame shall be made saparately). |
| 191 | Old Steel:- Bars, Z-section, Rolled steel sections, Structural Steel section, G.I. barbed wire, Expended metal/IRC fabric, CI/SCI pipes of various diameter, GI pipes of various diameter, CI pipes of various diameter (Broken in pieces), CI Manhole cover & frames( Broken in pieces) CI, DI, LA, etc. |
| 192 | Credit for Old timber scraped/Unserviceable |
| 193 | Credit for Old Aluminium Scrap/Unserviceable |
| 194 | Credit for Old Brass Scrap/Unserviceable |
| 195 | Modified Estimated Cost after using Correction factor on DSR-2023 (Item No.01 to 82.01) on account of GST @ 0.973=(-) 159448/-(5905466*0.973=5746018) = (5905466-5746018) = 159448) |
| 196 | Less cost [email protected]% on DSR-2023 (Item No.01 to 82.01)= 5988/-(5746018*0.09%=5171) Please Enable Macros to View BoQ information |
