Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder 0.0 Sl.NO DESCRIPTION / PRICE QUOTED FOR AMOUNT 1.0 Total Quoted Amount Schedule - A i/c GST 0.0 2.0 Total Quoted Amount Schedule - B i/c GST 0.0 3.0 Total Quoted Amount Schedule - C i/c GST 0.0 4.0 Total Quoted Amount Schedule - D i/c GST 0.0 5.0 Total Quoted Amount Schedule - E i/c GST 0.0 9.0 TOTAL QUOTED AMOUNT INCLUDING GST 0.0 Note: 1. Free Issue Material: NIL BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder Sl.NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT SCHEDULE - A CIVIL WORKS 1.0 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. a) All kinds of soil Cum 1044.0 0.0 b) Ordinary rock Cum 131.0 0.0 c) Hard rock (blasting prohibited) Cum 131.0 0.0 2.0 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. Cum 77.0 0.0 b) Ordinary rock Cum 10.0 0.0 c) Hard rock (blasting prohibited) Cum 10.0 0.0 3.0 Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. ( 20% Rate of Item No 1.) Cum 327.0 0.0 4.0 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil. Cum 122.0 0.0 5.0 Supplying and filling in plinth with River sand under floors, including watering, ramming, consolidating and dressing complete. Cum 49.0 0.0 6.0 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cum 93.0 0.0 7.0 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 100.0 0.0 8.0 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 92.0 0.0 9.0 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Cum 374.0 0.0 10.0 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Cum 19.0 0.0 11.0 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars / TMT bars Kg 70200.0 0.0 12.0 Centering and shuttering including strutting, propping etc. and removal of form for : a) Foundations, footings, bases of columns, etc. for mass concrete. Sqm 225.0 0.0 b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 236.0 0.0 c) Suspended floors, roofs, landings, balconies and access platform. Sqm 1605.0 0.0 d) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 1982.0 0.0 e) Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 684.0 0.0 f ) Stairs, (excluding landings) except spiral-staircases. Sqm 63.0 0.0 g) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. Sqm 416.0 0.0 h) Weather shade, Chajjas, corbels etc., including edges. Sqm 78.0 0.0 13.0 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). Cum 24.0 0.0 14.0 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 1161.0 0.0 15.0 Carriage of material by Mechanical Transportation including loading, unloading and stacking or levelling complete as directed by Engineer-in-charge. a) Earth, Lead upto 1.0. Km Cum 170.0 0.0 b) Earth, Lead upto 2.0. Kms Cum 37.0 0.0 c) Earth, Lead upto 3.0. Kms Cum 37.0 0.0 16.0 Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 200 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). Cum 354.0 0.0 17.0 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Kg 2160.0 0.0 18.0 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) Sqm 1982.0 0.0 19.0 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Sqm 3391.0 0.0 20.0 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) Sqm 1478.0 0.0 21.0 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 33.0 0.0 22.0 \\"Providing and applying waterproofing, using Single component liquid applied Polyurethane waterproofing membrane, to terrace as per specifications below,(i) Surface preparation- Clean the RCC slab surface & wall for treatment by removing dust, dirt and layers of concrete over the surface etc.(ii) Grouting and sealing- Horizontal and vertical angle joints need to be prepared with 75x75mm concave fillet using concrete admixed with water proofing chemical as per manufacturer specfication.(iii) Priming Coat- Epoxy based primer to be applied on terrace slab as per product TDS as per manufacturere specification.(iv) Final two layer of Polyurethane Coating – Apply single component polyurethane the water proofing coating when the Primer is tacky. PU coating must be applied all along the angle fillets, corners, joints around the pipes, conduits etc. Apply PU Coating on surrounding walls up to a height of minimum 300 mm from FFL. Always apply in two coats in order to avoid pinholes. The second coat can be applied after the first coat has dried as per product TDS depending on the ambient and surface temperature.(v) Protection Screed: Prior to laying of protection screed, use a separation barrier of 160 gsm Geo Textile. >50 mm Screed to be applied as per slope requirement. For vertical application 15-20 mm plaster is recommended. (Screed Concrete laying & Plaster will be paid seperately).\\" Sqm 482.0 0.0 23.0 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Sqm 152.0 0.0 24.0 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 0.42 0.0 25.0 Supplying and fixing of WPC Frame of size 100mm X 80mm complete with groove. Mtr. 137.0 0.0 26.0 \\"Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and having both sides decorative lamination by use of 0.80mm thick formica / lamination sheet of reputed brand ( century,green lam,archid) including lipping etc complete. The colour and pattern of grain should match the colour of frame.;35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws\\" a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 85.0 0.0 27.0 Supplying and fixing of WPC door shutter 27mm thickness excluding door fittings Sqm 2.0 0.0 28.0 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). sqm 71.0 0.0 29.0 Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With Aluminium beading. Sqm 6.0 0.0 30.0 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness Sqm 12.0 0.0 31.0 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 4708.0 0.0 32.0 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) Kg 1590.0 0.0 33.0 Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) Sqm 66.0 0.0 34.0 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Sqm 66.0 0.0 35.0 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 96.0 0.0 36.0 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile size upto 1.28 sqm Sqm 1027.0 0.0 37.0 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size 600*600 mm Sqm 99.0 0.0 38.0 Providing and laying Vitrified tiles in wall in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified wall tiles polished finish of size 600*1200 mm Sqm 161.0 0.0 39.0 Providing and laying of heavy-duty Parking Tiles of size 300 x 300 x 10 mm thk. having water absorption less than 0.5% of approved make in all colours and shades for outdoor floors such as parking, footpath, courtyard, etc. laid on 20mm thick base of cement mortar 1:4(1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per the directions of Engineer-in-charge. Sqm 465.0 0.0 40.0 Providing and fixing 18mm thick granite stone gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour ZADE-black, Lakha red Area of slab over 0.50 sqm Sqm 205.0 0.0 41.0 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Metre 177.0 0.0 42.0 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. Sqm 64.0 0.0 43.0 Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick. Sqm 8.0 0.0 44.0 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase Metre 375.0 0.0 45.0 Neat cement punning Sqm 30.0 0.0 46.0 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide × 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia × 50 mm long with 6 mm dia bolts, the other flange of cleat fixed to the angle hangers of 25 × 10 × 0.50 mm of required length with nuts and bolts of required size, and the other end of angle hanger fixed with intermediate G.I. channels 45 × 15 × 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm shall be fixed at 450 mm centre to centre in a direction perpendicular to G.I. intermediate channels with connecting clips made out of 2.64 mm dia × 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 × 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in three layers covering up to 150 mm on both sides of joint and two coats of primer suitable for the board, all as per manufacturer’s specification, and also including the cost of making openings for light fittings, grills, diffusers, and cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I):2011 (Board with BIS certification marks) sqm 566.0 0.0 47.0 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity sqm 112.0 0.0 48.0 Providing & Fixing wall caldding with elevation tiles of approved make, design and texture over external walls as per architectural drawings and instruction. The work shall include surface preparation, cleaning,leveling the the substrate applying suitable adhesive (cement plast) as per meanufacturer specifications, fixing elevation tiles over 12mm thick cement mortar 1:3(1cement:3 sand) and jointing with gray cement slurry @3.3Kg/Sqm inclpointing in white cement mixed with pigment of matching shade complete, edge finishing and cleaning of the surface after completion. Tiles shall be as per design water resistant weatherproof and UV resistant suitable for external vertical application. Rate to inclue all materials labour adhesives,scaffolding, cutting wastage and necessary tools& tackles or complete execution of the work in all respect sqm 150.0 0.0 49.0 Providing and applying wall care putty over plastered surface to prepare the surface even and smooth complete Sqm 6851.0 0.0 50.0 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Sqm 3391.0 0.0 51.0 Finishing walls with Acrylic Smooth weather proof exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). Sqm 1478.0 0.0 52.0 Providing and fixing bright finished brass tower bolts (barrel type) with 200x10 mm Each 68.0 0.0 53.0 Providing and fixing bright finished brass silding bolts with necessary screws etc. complete : 300x16 mm Each 68.0 0.0 54.0 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 47.0 0.0 55.0 Providing and fixing bright finished brass handles with screws etc. complete: 125mm Each 47.0 0.0 56.0 Providing and fixing powder coated aluminium hanging floor door stopper ISI marked of required colour and shade with necessary screws etc. complete. Twin rubber stopper Each 23.0 0.0 57.0 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer HEAVY DUTY (having brand logo with IS, IS: 3564, embossed on the body, door weight upto 80 kg and door width fro 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. make DORMA/ENOX/HETTICH or equivalent. Each 44.0 0.0 58.0 Providing and fixing bright finished SS pipe pull handles with screws etc. complete: 300 mm Make DORMA/ENOX/Hettich or equivalent Each 6.0 0.0 59.0 Providing, fixing, and installing Foam Type Water Fountain with 8 nozzles in 2 pools, complete with all accessories, fittings, and required fabrication works. The system shall consist of 16 foam-type brass nozzles with 16 ball joints, two sets of GI pipe inside the fountain, and mainline GI ‘A’ class pipelines with necessary plumbing fittings and fabrications. The pumping system shall include two mono block submersible pumps of 5 HP capacity each, complete with required plumbing fittings, valves, and fabrication, along with two stainless steel strain mesh filters on the suction side of the pumps. The lighting system shall comprise 16 waterproof LED lights of 12V × 27W capacity, capable of multi-colour changing effects, with silicon gaskets, stainless steel fasteners, waterproof cable glands, clamps for light fixing, and toughened stainless steel light bodies. The system shall be equipped with ISI marked cables for both lights and pumps, and an outdoor type control panel board made of 16-gauge MS body duly powder coated, grouted on stand, and fitted with necessary switchgear, MCBs, and protection devices of L&T/TC make for independent supply to pumps and LED lights. All works shall be carried out with proper fabrication, installation, alignment, testing, and commissioning to ensure a fully functional fountain system, as per the direction of the Engineer-in-Charge. Civil works such as construction of pools, grouting of pumps, and provision of water connection are excluded from the scope of this item Each 1.0 0.0 60.0 ROOFING: Supply and Installation of translucent roof with multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 mm thick of 900mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, or with special Aluminium connectors as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets. sqm 235.0 0.0 61.0 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg 4698.0 0.0 62.0 Providing and fixing 12 mm thick frameless toughened glass door shutter & partition wall of approved brand and manufacture, including providing and fixing top & bottom pivot , fixing & sliding arrangement and making necessary holes etc. for fixing required door fittings & partitions all complete as per direction of Engineer-in-charge (Door lock, floor spring, handles to be paid separately). sqm 234.0 0.0 63.0 Supply of Stainless Steel letters with weather proof MRF coating, box type to be made in 1 mm thick sheet with side walling box type of grade 304, height of each letter of size 250-450 mm (approx.) and with computerized graphicsfonts including cutting sheet, making box type letters and soldering nuts for fixing box type letters etc., complete as directed by Engineer-in-charge. each 25.0 0.0 64.0 Fixing of Stainless Steel letters with weather proof MRF coating, box type to be made in 1 mm thick sheet with side walling box type of grade 304, height of each letter of size 250-460 mm (approx.) and with computerized graphics fonts including cutting sheet, making box type letters and soldering nuts for fixing box type letters etc., complete as directed by Engineer-in-charge. sqm 25.0 0.0 65.0 Providing & fixing of ward robe/storage/showcase units 450mm deep made with 19mm thìck plywood and finished with laminate/veneer of approved shade and brand(century.green lan,archid). This includes providing all required SS hardwares. The back side plywood of the unit must be 9mm thick complete. sqm 123.0 0.0 66.0 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.\\"Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium compositepanel material consisting of 3mm thick FR grade mineral coresandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.\\"The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till thehanding over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. sqm 216.0 0.0 67.0 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 5848.0 0.0 68.0 Suplying and fixing of 12mm thick BWP plywood confirming to IS specfication for existing wall surface as directed by Engineer -incharge. sqm 623.0 0.0 69.0 Providing & Fixing decorative high pressure laminated sheet of 1 mm thick plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, inch ding cost of adhesive of approved quality. sqm 434.0 0.0 70.0 Providing and fixing the natural VENEER on existing plywood wall and to shapes as per the detail drawings on the existing surface shall be cladded and finished in veneer to shape and size with grooves as per the detail drawings. All the exposed veneer and wooden surfaces shall be stained to shade as directed by Engineer-in-charge and finished with Malamine Glossy finish polish. sqm 147.0 0.0 71.0 Providing and fixing as per approved sample wall paper installed as per manufacturer specification complete to the satisfaction of E-I-C/Architect. (Basic rate of wall paer is Rs. 141/- per Sq.ft) sqm 294.0 0.0 72.0 Providing & Fixing of acid etched film as directed by the Engineer-in-charge for all designs with machine cutting etc., complete. sqm 175.0 0.0 73.0 Providing & fixing PVC Ceiling panels of min. size 1'X9'6\\" or as per architectural design with necessary accessories including wire hangers, Gl main & cross runners, angle cleats, fasteners, etc. and also includes Providing and fixing other accessories such as PVC H-joints for panels, end caps, and internal/external corner pieces, Cutting and making holes for light fixtures, speakers, diffusers, or other ceiling-mounted accessories, complete as per the directions of engineer-in-charge. sqm 262.0 0.0 74.0 Providing and fixing WPC/ Charcoal fluted wall panels, min. 150mm wide x 23mm thick or as per the architectural design. The installation is to be done complete with necessary fixing clips, screws, adhesives, sealants and all required accessories. The work includes cutting and jointing at corners and edges, surface preparation, and finishing of all exposed edges with matching WPC corner beads and end profiles. The finished work must adhere to the design intent shown in the architectural drawings and manufacturer's installation guidelines, leaving a clean, level, and secure finish. sqm 144.0 0.0 A Total from Sl. No. (1 to 74) 0.0 B Add GST @ 18% 0.0 C Total Quoted Amount including GST (Schedule - A) 0.0 BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder Sl.NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT SCHEDULE - B CIVIL WORKS (Sanitary and Water Supply) 1.0 Providing and fixing white European type WC wall hang ( of size as directed by engineer incharge) including flush tank, flush plates, and hand shower spray. Consider Make is GROHE/ KOHLER/ DURAVIT Each 21.0 0.0 2.0 Supplying and fixing Countertop Washbasin ( of size as directed by engineer incharge) with Basin mixer complete. Consider Make is GROHE/ KOHLER/ DURAVIT Each 27.0 0.0 3.0 Providing and fixing mirror of 8 mm thick of reputed brand including Stainless steel studs and cost of all materials, labour complete as directed by the Engineer-in charge sqm 41.0 0.0 4.0 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Each 24.0 0.0 5.0 Providing and fixing toilet paper holder : C.P. brass Each 24.0 0.0 6.0 Providing and fixing stainless steel towel rail ,dual folding towel rack holder, towel hang & stand- Towel rail 24 inch length complete with stainless steel brackets fixed to wooden cleats with screws. Consider make : GROHE/JAQUAR/ KOHLER. Washroom Each 24.0 0.0 7.0 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. Each 48.0 0.0 8.0 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729. Each 24.0 0.0 9.0 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type. With C.C.Solid blocks. Each 7.0 0.0 10.0 Constructing RCC manhole in 1:2:4 with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : (a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : RCC Work 1:2:4 Each 7.0 0.0 (b) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : RCC Work 1:2:4 Each 3.0 0.0 11.0 Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. a) 110 mm diameter Metre 690.0 0.0 b) 75 mm diameter Metre 100.0 0.0 12.0 Providing and fixing PVC reducer socket 110 x 75mm Each 10.0 0.0 13.0 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Providing and fixing double equal plain junction of required degree with door. 110x110x110x110 mm Each 21.0 0.0 14.0 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door a) 110x110x110 mm Each 48.0 0.0 b) 75x75x75 mm Each 10.0 0.0 15.0 Bend 87.5° a) 110 mm bend Each 58.0 0.0 b) 75 mm bend Each 8.0 0.0 16.0 Coupler a) 110 mm Each 70.0 0.0 b) 75 mm Each 10.0 0.0 17.0 PVC Cowl 110 mm Each 12.0 0.0 18.0 Shoe (Plain) a) 110 mm Each 25.0 0.0 b) 75 mm Each 14.0 0.0 19.0 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110 mm Each 150.0 0.0 b) 75 mm Each 30.0 0.0 20.0 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Metre 170.0 0.0 21.0 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : a) 100 mm diameter Metre 90.0 0.0 b) 150 mm diameter Metre 70.0 0.0 c) 200 mm diameter Metre 150.0 0.0 22.0 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: a) 100 mm diameter S.W. pipe Metre 90.0 0.0 b) 150 mm diameter S.W. pipe Metre 70.0 0.0 c) 200 mm diameter S.W. pipe Metre 150.0 0.0 23.0 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work a) 80 mm dia. nominal bore Metre 180.0 0.0 b) 40 mm dia. nominal bore Metre 260.0 0.0 c) 25 mm dia. nominal bore Metre 125.0 0.0 24.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a) 40 mm dia. nominal bore Metre 70.0 0.0 b) 25 mm dia. nominal bore Metre 235.0 0.0 c) 15 mm dia. nominal bore Metre 172.0 0.0 25.0 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) a) 80 mm dia. nominal bore Each 8.0 0.0 b) 40 mm dia. nominal bore Each 50.0 0.0 c) 25 mm dia. nominal bore Each 25.0 0.0 d) 15 mm dia. nominal bore Each 20.0 0.0 26.0 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a) 80 mm nominal bore Each 5.0 0.0 b) 40 mm nominal bore Each 25.0 0.0 c) 25 mm nominal bore Each 15.0 0.0 27.0 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore Horizontal Each 5.0 0.0 28.0 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore Each 21.0 0.0 29.0 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Each 21.0 0.0 30.0 Providing and fixing two way long nose bib cock / Automatic push cock Pllar cock with flange of aproved make heavy duty 15 mm nominal bore. Each 21.0 0.0 31.0 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore Each 30.0 0.0 32.0 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore Each 119.0 0.0 33.0 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per litre 12000.0 0.0 34.0 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore Each 18.0 0.0 35.0 Providing and fixing to the inlet mouth of rain water pipe stainless steel grating of required diameter. Each 25.0 0.0 36.0 Cutting holes up to 30x30 cm in walls including making good the same: With C.C.solid blocks Each 62.0 0.0 37.0 Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Each 63.0 0.0 38.0 Providing and fixing Health facuet with all fittings arrangement of approved quality and colours.Consider make: GROHE/ KOHLER/ DURAVIT Each 3.0 0.0 39.0 Providing and fixing Divertor with shower mixer including spout, overhead shower8\\" round and shower arm complete Consider Make is GROHE/ KOHLER/ DURAVIT Each 21.0 0.0 40.0 Providing and fixing towel ring specified model with a minimum distanceof 37mm from wall face with concealed fittings arrangement of approved quality and colours .Consider make : GROHE/JAQUAR/ KOHLER. Each 27.0 0.0 41.0 Providing and fixing Glass W/holder with all fittings arrangement of approved quality and colours .Consider make : MAKE JAQUAR/KOHLER/MARC Each 27.0 0.0 A Total from Sl. No. (1 to 41) 0.0 B Add GST @ 18% 0.0 C Total Quoted Amount including GST (Schedule - B) 0.0 BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder Sl.NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT SCHEDULE - C CIVIL WORKS (EXTERNAL DRAINS) 1.0 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 120.0 0.0 2.0 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cum 10.0 0.0 3.0 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 16.0 0.0 4.0 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 30.0 0.0 5.0 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Cum 7.0 0.0 6.0 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars / TMT Bars KG 5300.0 0.0 7.0 Centering and shuttering including strutting, propping etc. and removal of form for : a) Foundations, footings, bases of columns, etc. for mass concrete. Sqm 40.0 0.0 b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 400.0 0.0 8.0 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 24.0 0.0 9.0 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 75 mm diameter Metre 60.0 0.0 A Total from Sl. No. (1 to 9) 0.0 B Add GST @ 18% 0.0 C Total Quoted Amount including GST (Schedule - C) 0.0 BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder Sl.NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT SCHEDULE - D ELECTRICAL WORKS 1.0 Wiring for light point / fan point/ exhaust fan point / call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in Surface/ Recessed (concealed) including medium class PVC conduit/casing capping with bends, coupler, with modular switch, modular plate, suitable Modular GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Extra Points for future use shall be terminated on suitable Ceiling Rose. The number of modules and size of the modular GI box shall be confirmed as per site condition. Rates shall be same short, medium, long points up to the length and inclusive of all required accessories as per approved make. The number of modules for the modular GI box shall be confirmed by the Engineering In-charge. Nos 827.0 0.0 2.0 Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. The number of modules for the modular GI box shall be confirmed by the Engineering In-charge. Rate shall be same for short, medium and long points length and including of as required accessories as per approved make. Nos 40.0 0.0 3.0 Point wiring for power supply for 5/6 pin 15/ 16 Amps modular piano combo/ switch- socket outlet, socket with shutter type. point wiring with 2 x 4 sq. mm. FRLS / FR PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (concealed) medium class PVC conduit/ casing caping, with modular plate, suitable GI box and earthing the point with 4 sq.mm. FRLS / FR PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points nd including of as required accessories as per approved make. Nos 44.0 0.0 4.0 Air Conditioner Point wiring for 5/6 pin 20 Amps modular socket outlet point, including 2 M socket with supply and fixing of 16A / 20A two modular Single Phase Motor starter switch with point wiring with 2 x 4 sq. mm+1 x4 sq. mm. FRLS PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (concealed) including medium class PVC conduit/ casing caping, with modular plate & base plate, 2 Module suitable GI box (2 Nos) and earthing the point with 4 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points including all accessories as required and as per approved make. Nos 24.0 0.0 5.0 Separate board Point wiring for 3/5 pin 5/ 6 Amps piano socket outlet point with 2X2.5 sq. mm. FRLS/FR PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (concealed) medium class PVC conduit/ casing caping,with bends, coupler, with modular type switch/ socket, modular plate, suitable GI box and earthing the point with 2.5 sq.mm . FRLS/FR PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points. The number of modules for the modular GI box shall be confirmed by the Engineering In-charge. Nos 75.0 0.0 6.0 Same board wiring in Surface/ Recessed raw Supply, for 3/5 pin 5/ 6 amps piano socket and Switch outlet point mounted on modular switch, modular plate, on existing GI box with 1.5 sq. mm. FRLS / FR PVC copper multistrand conductor as required as per specification on same board along with 1.5 sq. mm. FRLS PVC cu. wire for earthing. Rate shall be same for short, medium and long points length and including of as required accessories as per approved make. Nos 67.0 0.0 7.0 Geyser Point wiring for 5/6 pin 16/20 Amps heavy duty modular socket outlet point, including 2M socket and with 15/20A switch with point wiring with 2 x 4.0 sq. mm. FRLS PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (concealed) including medium class PVC conduit/ casing caping, with modular plate & base plate, 2 Module suitable GI box (2 Nos) and earthing the point with 4.0 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points including all accessories as required and as per approved make. Nos 21.0 0.0 8.0 Wiring for circuit /submain wiring along with earth wire with the following sizes of FRLS PVC insulated/XLPE armoured copper conductor, single core/two core/4core cable in Surface/ Recessed suitable size, medium class PVC conduit/ casing caping as required. All earth wire shall be green colour only. 8.1 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire.(For light circuit) Mtr 200.0 0.0 8.2 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire.(For Separate Board Circuit and street light circuit) Mtr 1100.0 0.0 8.3 2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire. (For Power Circuit ) Mtr 1050.0 0.0 8.4 2 x 6 Sq.mm + 1 x 6 Sq.mm earth wire.( For Main DB Single phase Distribution) Mtr 674.0 0.0 8.5 4 X 10 sq. mm + 2 X 6 sq. mm earth wire (For Mains, 3 phase distribution and Lifts) Mtr 450.0 0.0 9.0 Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. For lighting and power cable, Earth GI wire, telephone and ethernet cable, fire alarm cable, call bell, etc., Make:PVC CASING/ CAPING / CONDUIT : POLY CAB/MODI/ PRESTO PLAST/ DURALINE/ BEC PLAST Mtr 1560.0 0.0 10.0 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Model shall be confirmed by the Engineering In-charge. Make: ANCHOR, GM, UN1QUE, FORBIX SEMICON, LEGRAND, TEXTEL, HAVELS Nos 21.0 0.0 11.0 Supplying and fixing bell bush modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate & switch box including connections but excluding modular plate etc.as required. Model shall be confirmed by the Engineering In-charge. Make: ANCHOR, GM, UN1QUE, FORBIX SEMICON, LEGRAND, TEXTEL, HAVELS Nos 21.0 0.0 12.0 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with brush less direct current(BLDC) motor, class of insulation, 3 Nos of blade, 30cm long down rod/Extra down rod of size as per site requirement, 2nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50HZ, single phase AC supply, earthing etc. complete as required.Make: HAVELLS / BAJAJ / CROMPTON / C & S / Orient / Khaitan / Usha Nos 69.0 0.0 13.0 Supplying and fixing two module stepped type electronic fan regulator of 230 V, 50 Hz on the existing modular plate switch box including connections but excluding modular plate etc. as required. Model/ Type shall be confirmed by the Engineering In-charge.Make : LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) /C & S Nos 69.0 0.0 14.0 Providing and fixing circular/ hexagonal GI box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick g.i. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the g.i. box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. Model/Type shall be confirmed by the Engineering In-charge.Make: POLYCAB/ LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S /HAVELLS / BAJAJ / CROMPTON / C & S / Orient / Khaitan / Usha Nos 69.0 0.0 15.0 Supplying and fixing brass batten/ angle holder including connection etc. as required. Model/Type shall be confirmed by the Engineering In-charge. Make: ANCHOR/ HAVELS/ C&S/ GM/ LEGRAND/POLY CAB. Model/Type shall be confirmed by the Engineering In-charge. Nos 54.0 0.0 16.0 Installation, testing and commissioning of wall bracket / frame of Ceiling Fitting / Exhaust Fan etc.. ( With supply of Anchor fasteners as required ) and Tube light /Fittings / fixtures containing up to two GSL / CFL / LED lamps per fitting, of all sizes, complete with all accessories including connections etc. as required. Nos 100.0 0.0 17.0 Supplying 3Cx4 Sq mm Copper conductor XLPE insulated, PVC inner sheathed, Steel Round Wire Armoured, and PVC sheathed, 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification of 3Cx4 Sq. mm, Copper.(Al for external lighting) Mtr 150.0 0.0 18.0 Supplying and fixing of following sizes/modules, GI box along with modular base & cover plate for modular switches in recess etc, as required. 18.1 1 or 2 Module(75mmx75mm) Nos 22.0 0.0 18.2 3 Module(100mmx75mm) Nos 12.0 0.0 18.3 4 Module(125x75mm) Nos 12.0 0.0 18.4 6 Module(200x75mm) Nos 22.0 0.0 18.5 8 Module(125mmx125mm) Nos 25.0 0.0 18.6 12 Module(200x150mm) Nos 21.0 0.0 19.0 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections including modular plate etc. as required.Model/Type/quantity shall be confirmed by the Engineering In-charge. 19.1 5/6 A switch Nos 75.0 0.0 19.2 15/16 A switch Nos 44.0 0.0 19.3 3 pin 5/6 A socket outlet Nos 75.0 0.0 19.4 6 pin 15/16 A socket outlet Nos 44.0 0.0 19.5 TV antenna socket outlet Nos 21.0 0.0 19.6 Bell push Nos 21.0 0.0 20.0 Supplying and fixing modular blanking plate on the existing modular box plate as required. Make LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S. Nos 28.0 0.0 21.0 Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S.Model/Type shall be confirmed by the Engineering In-charge. Nos 17.0 0.0 22.0 Supplying and fixing 40 A rating, Two Pole (Single phase and neutral) 240 V,RCCB Having sensitivity current 30mA In the existing MCB DB complete with connections, testing and commissioning etc. as required. Make LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S.Model/Type shall be confirmed by the Engineering In-charge. Nos 49.0 0.0 23.0 Supplying and fixing 10A/16A/32A rating single pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc as required. Make LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S.Model/Type shall be confirmed by the Engineering In-charge. Nos 82.0 0.0 24.0 Supplying and fixing 5A to 32 A, rating Double Pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load of single pole and Neutral in the existing MCB DB complete with connections, testing and commissioning etc as required. Make LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S.Model/Type shall be confirmed by the Engineering In-charge. Nos 49.0 0.0 25.0 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.Make: LEGRAND / ANCHOR/ CONA/ PHILIPS/ ABB / SCHNEIDER /GOLD MEDAL(GM) / C & S Nos 25.0 0.0 26.0 Supplying and fixing of TP sheet steel enclosure on surface/recess along with 16/25/32 A 415V, C curve TP MCB complete with connections, testing and commissioning etc. as required. Nos 21.0 0.0 27.0 Supplying and fixing following 6way, Double Door, single pole and neutral sheet steel MCB distribution board, 240 V, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator).Make: L & T/ BCH/LEGRAND/ HAVELLS/ SCHNEIDER / C & S. Model/Type shall be confirmed by the Engineering In-charge. Nos 18.0 0.0 28.0 Supplying and fixing following 8way, Double Door, single pole and neutral sheet steel MCB distribution board, 240 V, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator).Make: L & T/ BCH/LEGRAND/ HAVELLS/ SCHNEIDER / C & S. Model/Type shall be confirmed by the Engineering In-charge. Nos 12.0 0.0 29.0 Supplying and fixing following 16way, Double Door, single pole and neutral sheet steel MCB distribution board, 240 V, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator).Make: L & T/ BCH/LEGRAND/ HAVELLS/ SCHNEIDER / C & S. Model/Type shall be confirmed by the Engineering In-charge. Nos 15.0 0.0 30.0 Supplying and fixing following 8way(4+24), Double Door, Horizontal type pole and neutral sheet steel. MCB distribution board, 415 V, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator).Make: L & T/ BCH/LEGRAND/ HAVELLS/ SCHNEIDER / C & S. Model/Type shall be confirmed by the Engineering In-charge. Nos 7.0 0.0 31.0 Supplying and installation of maintenance free earthing pit of 450mm x 450mm x 450mm, consisting of copper bonded stainless steel chemical earth electrode with earth enhancing compound. The chemical earth electrode shall be of non-corrosive type of minimum 3000 mm long and 17.0mm to 17.2 mm dia. and minimum of 250 microns copper coating including all accessories and providing excavation, masonary enclosure (brick work/pre cast encloser with 100mm thickness/RCC cover chamber) with cover plate of 100mm (of required size) having lifting arrangement, watering pipe and back fill compound made of natural earth mineral etc complete as required.(refer dwg detail Annexure-I) Make: Indelec, Universal earth system, Ashlok. Nos 5.0 0.0 32.0 Supplying and laying of 25 mm X 5 mm GI strip on surface / or in recess connection with proper spacing of suitable saddle spacer with bolt nut assembly and other required hardware's and accessories. Mtr 380.0 0.0 33.0 Supplying and laying 25 mm x 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with GI nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping with 2 sets of GI nut bolt & spring washer spaced at 50mm).Arrangement/connection shall be done as per instruction of Engineering In charge. Mtr 150.0 0.0 34.0 Supply, fabricating, and Installing, the street light Bracket for fixing Street Light fittings / Flood Light Fitting / Blinkers / Post Top Lantern as per the shape given by the Engineer In charge, it should be made with 1 meter length 40 mm diameter, GI medium class pipe, 4 No. 16 mm nuts and bolts, 2 No. GI flat of 3 mm thick and 200 mm length, 40 mm width, for fixing the bracket to the wall / pole, complete with all accessories including connections etc. as required. Nos 13.0 0.0 35.0 Supply of approved make/model with Energy efficient With ISI Mark exhaust fan 300 mm sweep , epoxy powder coated, double ball bearing, metal blade complete with all standard accessories such as motor, blades & Louvers, brackets, rubber cushion with automatic shutters & bird screen but without regulator, exhaust fan shall be fixed in existing window modular type in utility room. Rating : 230 V, 50 Hz, Complete with all necessary accessories. Make: HAVELLS / BAJAJ / CROMPTON / C & S / Orient / Khaitan / Usha Nos 22.0 0.0 36.0 Installation of modular type exhaust fan up to 450mm sweep in existing UPVC/Steel/RCC/brick ventilation opening, including making good finishing, connection, testing, commissioning etc as required Nos 22.0 0.0 37.0 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box including connections etc. as required Nos 75.0 0.0 38.0 Supply & installation of approved make LED tube batten 4 feet length with ISI mark, 18 - 20 W power with emergency inverter batten LED Tube Light, Voltage rating : 170 V to 250 V, 50 Hz., IP 22.Model/Type shall be confirmed by the Engineering In-charge. Nos 53.0 0.0 39.0 Supplying 7W/9W, Pin type LED bulb suitable for operation on 230 volt, 50 Hz, Single Phase AC supply. Nos 48.0 0.0 40.0 Supplying surface/recess mounted round shape 15W/18W LED downlighter with minimum 1125 lumen, 6500K suitable for operation on 230V 50HZ single phase AC supply with electronic driver and 2KV surge protector and all accessories complete for ceiling/wall/surface etc, as required, CRCA powder coated white housing, High Efficiency Transilience(HET) diffuser of poly carbonate, LED Conforming to LM 80 and Lumen output to LM 79 and should also produce the certificate. Type test report should be produced. Valid BIS Certificate should be produced. Nos 222.0 0.0 41.0 Supply and fixing of 20 W LED Streek Track Light 3000 K warm white colour, body colour black/white, Minimum one-year complete warranty, Modern Design: Spotlight comes with high quality LM 80 Tested LED Wide Voltage Range & High Voltage Protection: Spotlight has a wide voltage range of 150-300 VAC & High Voltage protection up to 400 VAC, Surge Protection up to 3 KV, protecting the device from fluctuations for long lasting performance Easy Installation: flush and recess mounted celling mounted with spring loaded suspension ceiling. Equivalent to Havells 20 W Led Streek Track Light 3000 K White, minimum of 2 years warranty or the OEM warranty, whichever is higher, shall be considered Havells 20 W Led Streek Track Light 3000 K Black, LHEEANPBPH1K020 or equivalent reputed make. Nos 20.0 0.0 42.0 Supply of LED Rope/Strip light with connector/driver equivalent to Philips Mini Marathon LED Rope Light with connector, including no of driver as required. Pack of 20M (20M=one set), IP 65/66 water proof strip/Rope light with 400 lumens/meter, warm white (2700 to 3500K) with 400 lumens/meter, warm white(2700 to 3500K) with superior light output, robust material, silicon material, for indoor & outdoor application, power source: coded electric, warranty 1 year on product, approx. 72 LEDs/meter with 400 lumens/meter and approx. power consumption of 6w/meter,(Exact LED light colour will be decided during site execution time).including no of driver as required. Set 23.0 0.0 43.0 Installation, testing and commissioning of Rope/Strip LED light including all required accessories and related works etc. Mtr 460.0 0.0 44.0 Supply and installation of well glass luminaire fitting of 40 - 50 w, outdoor application, IP 66 class, luminaire to be provided with mounting bracket suitable for tower / pole mounting. the luminaire shall be capable of producing 120 lux for each watt. secondary lence should be provided on the LED. the luminaire shall be suitable for working on 230 V, AC 50HZ & complete with driver. the inbuilt driver shall have surge and overcurrent / overload protection. LED colour : warm white colour LED conforming to lm 80 and lumen output to lm 79 and should also produce the certificate. type test report should be produced. valid bis certificate should be produced. make: Bajaj / Philips / GE / Crompton / Havells / Surya / Wipro / Syska / Osram / Halonix Nos 16.0 0.0 45.0 Supply of Minimum 3 watt premium spot light /cov light with indoor type, colour temperature: warm white(2700 to 3500K) and has a lighting angle of 60 degrees to deliver the best lighting result. The light is made of high quality material, used for home decor articles, kitchen shelves, cabinet, and wardrobe lighting etc. minimum one year complete warranty, Modern design: spotlight comes with high quality LM 80 tested LED wide voltage range and high voltage protection: spotlight has a voltage range of 150V-300 VAC, surge protection up to 3KV, protecting the device from fluctuations for long lasting performance , Easy installation: flush and recess mount with spring loaded suspension and for false ceiling. Approx cut out size:25mm to 50mm. Finish type: polished, materials: Metal/polycarbonate block body, glass, made up of high quality materials.(Exact LED light colour will be decided as per site execution time) Nos 246.0 0.0 46.0 Supply of Flood light lumen. 90W flood light LED luminaire / fitting , outdoor application, IP 66 class protection. luminaire to be provided with mounting bracket suitable for tower / pole mounting. the luminaire shall be capable of producing 120 lux for each watt. secondary lence should be provided on the led. the luminaire shall be suitable for working on 230 V, AC 50 HZ & complete with driver. the inbuilt driver shall have surge and overcurrent / overload protection. LED colour : Yellow colour LED conforming to lm 80 and lumen output to lm 79 and should also produce the certificate. type test report should be produced. valid BIS certificate should be produced. Make: Bajaj / Philips / GE / Crompton / Havells / Surya / Wipro / Syska / Osram / Halonix Nos 11.0 0.0 47.0 Supply, Fixing, testing & Commissioning of the landscaping lighting fixture/post top lantern of minimum 27W, IP65 protection, minimum 80 Im/watt, 4000K (Warm White) of approved shade having minimum three years of warranty along with surge protection device of minimum 3 KV, necessary bracket for light mounting and pole mounting, 3mt powder coated MS pole with inbuilt junction box having window & flush cover with locking arrangement at suitable height from base for cable termination with two way terminal connector including earthing point and all connection as required. Light fitting equivalent to Philips cat No.LED Top Post BGP161 or Wipro Cat No. Urbano Pathway LED LP06-351-xxx-57-xx or Havells Cat. No. Endura Spring-6 LHLC19145099 only. Fitting along with pole shall be mounted on the existing foundation (Under Civil scope). Nos 2.0 0.0 48.0 installation, testing and commissioning of spot LED light for shelves, cabinet, wardrobe, false ceiling etc,/ main gate pilar LED light including all required accessories & related work etc. Nos 248.0 0.0 49.0 Supply and installation and testing commissioning of 1 No -415V,250A, 4P, Automatic Transfer Switch(ATS) for raw power and DG power distribution panel with MCCB's and having 250A Power contactor/MCCB bus coupler arrangement its operated/connected by electrically/mechanically interlocking with sources of supply, its closed at raw power supply only. before ATS 250A MCCB shall be provided for raw power and 250A MCCB shall be provided for DG power. On, Off, Trip indication lamps.Incoming: Raw power and DG power MCCB with ATS,250A Power contactor bus coupler, Outgoing for essential and non essential load details with all phase indication lamps, Energy meter, Digital Ammeter, Digital Voltmeter for two power sources. As per technical specifications Annexure - II. Nos 1.0 0.0 Panel GA drawing and specification details shall be submitted to Engineering in charge for approvals. Prior approval shall be taken from Engineering in charge for Panel manufacturing. The panel size will be determined based on site space availability and requirements, with prior approval from the Engineering In-Charge. 50.0 Supplying and drawing of 2 pair, 0.5 Sq. mm. FRLS/FR PVC insulated annealed copper conductor, Unarmoured telephone cable in the existing concealed(Recessed) Steel/ PVC conduct as required. Make : FINOLEX/ ANCHOR/ KENT/ HAVELLS/ V-GUARD / GLOSTER/RPG/KEI/RAVIN Mtr 1100.0 0.0 51.0 Supply and fixing Modular telephone socket outlet RJ 11 on the existing switch box / cover including termination/ferruling/glanding/ tagging etc. as required. Nos 31.0 0.0 52.0 Providing, fixing connecting and testing of 50 pair solderless telephone tag block in surface/recess in wall with required size of M.S. box with hinged lockable cover duly stove enamel painted. Nos 1.0 0.0 53.0 Supplying and drawing of co axial cable TV cable RG-6 grade, 0.7mm solid copper conductor PE insulated shieled with PVC sheath in the existing surface/recessed steel/PVC conduit as required. Mtr 700.0 0.0 54.0 Supply Installation, Testing and commissioning work of LED TV,55”, Screen size-55”, resolution (Pixels)-(3840x 2160) UHD, Category-Smart, Energy Star rating- Minimum 3 star, Mounting type-Both Table and Wall mount suitable for operation with single phase 240V, AC, 50 Hz supply system. With Minimum 2No. HDMI ports, 1 Ethernet Port, 1 No - VGA port, 2 No. USB ports. etc. with including mounting stand. Make-Samsung, LG, Lloyd, Philips, Sony Nos 21.0 0.0 55.0 Supply of inverter type split AC cooling capacity 2.0TR , 5 Star as per latest BEE standard. Rated cooling capacity at 100% load watts>= 6.2KW/24000BTU/Hr, Power supply V/HZ/Ph 230/50/1 Phase coli(Condenser and evaporator anti corrosive treatment for IDU and ODU fins.Anti corrosive coating required. Compressor type twin rotary, refrigerant Eco- friendly R32 or R410a, ISEER as per 5 Star or above fan speed 3 steps or more, function mode Auto/cool/fan shall have power saving mode, temperature setting option should be available. Remote control wireless with LCD display with 3M standard copper tube length. Specification attached as Annexure-III Nos 24.0 0.0 Warranty- 1 year comprehensive warranty for whole AC unit and five years offered by OEM ( whichever more)for compressor unit from the date of commissioning. 2.0Ton split AC as per the technical details attached. connecting of outdoor units to indoor units Copper tubes with insulation shall be installed within PVC pipes using suitable clamping and other necessary accessories and also for cables. Proper supports, with appropriate bolts and nuts, shall be provided for the outdoor units at the terrace or lintel beam . Make: VOLTAS, BLUE STAR, LG, CARRIER, DAIKIN 56.0 Supply of Heavy duty wall mounted GI coated metallic stand with required all accessories hanger fastener, bolt nuts, clamps etc, for AC Outdoor unit (Load carrying capacity of minimum 150Kg) where ever necessary. Nos 21.0 0.0 57.0 Supply of extra copper tube from AC indoor unit to AC outdoor unit with 100% pure copper material with required all accessories like connector, fittings etc. Mtr 80.0 0.0 58.0 Supply of extra foam heat insulated tube for AC copper tube(For 1.8Mtr) Mtr 80.0 0.0 59.0 Installation, Testing commissioning of all types of Spilt AC Unit ( 1 to 2 ton) along with outdoor and its stand including all required accessories and related hardware works etc Nos 24.0 0.0 60.0 Supplying of 3.5Cx185 Sq. mm size of Aluminium conductor XLPE insulated, PVC inner sheathed, Steel Round Wire Armoured, and PVC sheathed, 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification. 3.5Cx185 Sq. mm, Aluminium. Mtr 400.0 0.0 61.0 Providing, laying and fixing 100 mm dia. GI pipe (B class) in ground complete with GI fittings including trenching (75 cm deep) and refilling as per previous condition as required. Road Crossing and where ever required. As per site requirement and direction of Engineering in charge. Mtr 40.0 0.0 62.0 Supply and making end termination with brass double compression gland with suitable size including providing and crimping of aluminium lugs for following size of XLPE armoured power aluminium conductor cable of 1.1 KV grade as required: 3.5Cx185 Sq. mm.Cable gland make: Comet/ HMI/ Lapp/ Phoenix/ Precision/ CCI.Cable lugs make : Dowells/ Jainson/ Connect well/ Phoenix EA 2.0 0.0 63.0 Laying of 3 .5 C* 95sq.mm and up to 185sqmm PVC Insulated and PVC sheathed / XLPE Power cable of 1.1 KV Grade of following size direct in ground including excavation, and refiling the trench as per previous condition etc as required. But excluding sand cushioning and Protective Covering. Mtr 400.0 0.0 64.0 Laying of 3 .5 C* 95sq.mm and up to 185sqmm PVC Insulated and PVC sheathed / XLPE Power cable of 1.1 KV Grade , on wall surface as required, clamped with suitable size of cable. Mtr 200.0 0.0 65.0 Laying of 3 .5 C* 95sq.mm up to 400sqmm PVC Insulated and PVC sheathed / XLPE Power cable of 1.1 KV Grade, in the existing RCC/HUME/METAL pipe as required. Mtr 50.0 0.0 66.0 Supplying of 3.5Cx150 Sq. mm size of Aluminium conductor XLPE insulated, PVC inner sheathed, Steel Round Wire Armoured, and PVC sheathed, 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification. 3.5Cx185 Sq. mm, Aluminium. Mtr 250.0 0.0 67.0 Supply and making end termination with brass double compression gland with suitable size including providing and crimping of aluminium lugs for following size of XLPE armoured power aluminium conductor cable of 1.1 KV grade as required: 3.5Cx150 Sq. mm.Cable gland make: Comet/ HMI/ Lapp/ Phoenix/ Precision/ CCI.Cable lugs make : Dowells/ Jainson/ Connect well/ Phoenix EA 2.0 0.0 68.0 Lift - 13 -Passenger Lift, S+3, Design, Manufacture, Supplying, installation, testing and commissioning of 13 Nos Passenger lift, including liasioning charges to obtain approval from Statutory body for installation, without machine room/Machine room less lift for Transit guest house Building having contract speed of 1 to 1.5 MPS serving G+3 floors in the lift shaft as per scope of work and technical specifications.; Speed: 1.50 MPS; Floors: Ground + 3 Floors (3 Floors);Travel: 12 Meters (approx.);Stops & Openings: 4 Stops & 4 Opening; Shaft Dimension: As per manufacture; Controller: AC Variable Voltage & Variable Frequency Drive; Automatic Rescue Device Complete with Dry Maintenance Free Batteries as required; Nos 1.0 0.0 Operation: Microprocessor based single automatic push button/ simplex collective selective with/ without attendant; Power: 415 V, 3 Phase, 50 Hz, 4 wires system; Type of Doors; Car: Power operated, Centre opening horizontal sliding stainless steel scratch proof (moon rock finish) Car Panel and cowls in painted finish with Rear Side Glass Panel.; Landing doors : Stainless Steel Scratch proof hair line finish; A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to control panel in the lift car.; Voice announcement system in the car to announce the position. Scaffolding arrangement, I-beam required size by OEM/No of hooks arrangement in slab and other OEM requirements to be provided by Civil contractor not in scope of LIft manufacture. Electrical License from Electrical safety department in contractor scope. (Detailed Technical specification and Scope of work are attached as Annexure-IV) 69.0 Supplying, installation & testing of 13 PAX LIFT MCB Distribution Board with horizontal type double door , three pole and neutral, sheet steel, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar including interconnections with powder painted including earthing etc. as required including MCB/RCCB having following specifications; (FOR 13 PAX LIFT). Detailed specification & rate analysis is attached as REVISED SECTION-C and forms the part of BOQ. Requested to refer the same. Set 1.0 0.0 70.0 Supply & fixing of 25 Litre wall mounted Induction type (Induction heat transfer technology) storage water heater (Geyser) with No heating element, BEE certified minimum 4 Star, scaling resistant with heavy duty protective Anode Rod, Pressure 8 bar, Feroglas dry powder Coated Inner container which ensures superior resistance against corrosion & hard water, Energy Saving High Density PUF insulation, High precision thermostat & cutout, Tank material- ultra-thick cold-rolled steel plate, Remote control for easy operation, Digital Temperature Display for both Set and live temperature with Smart Mode Setting, Automatic operation of water heater for Auto-Off and On Time, with induction coil outside the tank having no contact with water, including Stainless Steel braided exterior flexible pipe for hot & cold water with solid brass connector for rust resistant to ensure longevity, including 16 A Three pin shock safe plug top, minimum 2 Years Comprehensive warranty, minimum 7 Years Warranty on Inner Container and minimum 5 years Warranty on Induction Coil, or the OEM warranty, whichever is higher, Wattage: 2000 W, Voltage: 230V, 50 Hz, 1 Phase , Colour: will be decided by EIC at the time of execution, Make: V-Guard, Bajaj, Havells, AO Smith, Crompton, GE, Philips, Kenstar. Nos 21.0 0.0 71.0 Supply and fixing of wall washer light 10W , 4 way direction, warm white, IP 65/66, Fixture material Aluminium die cast/Stainless steel, minimum of 2 years warranty or the OEM warranty, whichever is higher, shall be considered. Equivalent to Philips Tetris outdoor Wall washer Product SKU : 919215851297 model. Nos 15.0 0.0 72.0 SITC of 2 Watt of LED Garnet Integrated Spotlight Compact Design Ceiling Spot Light for Cabinets & Wardrobes Cabinet Spotlight Warm White (2700K or 3000K) (2W Cabinet Spotlight) including all required accessories etc.Make:Wipro/Philips/Bajaj/GE/Crompton/Havells/Halonix/Syska Nos 225.0 0.0 73.0 SITC of Cruv Glass Decorative Hanging Light for Ceiling Chandelier Pendant Light for Home Decoration (Hanging Brown) Cruv Glass, Metal Electroplating Finish Ceiling Light, Chandelier for Bedroom, Living Room High quality Metal which gives a premium look for reception (same as image) (35Lx55Wx30h)Cm including all required accessories & related work etc.Make:Wipro/Philips/Bajaj/Crompton/Havells/Halonix or any equilent make with ISI mark and or as required by EIC during execution. Nos 6.0 0.0 74.0 SITC of Jhumer with decoarative handing candle lights (1200X1800)mm for Reception for deocration (same as image) including all required accessories & related work etc.Make:Wipro/Philips/Bajaj/Crompton/Havells/Halonix/Syska or any equilent make with ISI mark and or as required by EIC during execution. Nos 3.0 0.0 75.0 SITC of Glass Decorative Hanging Light for Living Room, Ceiling Chandelier Pendant Light (3-Light Linear) Hanging Light for Modern Ceiling Pendant Bell Shaped Lining Glass (same as image) including all required accessories & related work etc.Make:Wipro/Philips/Bajaj/Crompton/Havells/Halonix/Syska or any equilent make with ISI mark and or as required by EIC during execution. Nos 100.0 0.0 76.0 SITC of Supply of Wall / Bed backside CORAL TREE Long Dual Side LED Light Frosted Glass Metal Wall Light for Bedroom, Living Room, Dining Room & Home Decor- (Golden Color - 60 Cm Height). (same as image) including all required accessories & related work etc.Make:Wipro/Philips/Bajaj/Crompton/Havells/Halonix/Syska or any equilent make with ISI mark and or as required by EIC during execution. Nos 36.0 0.0 77.0 Supply and Fixing of Bed backside table decorative LED lights with metal clamp for all rooms as required as shown in the image including all required accessories & related work etc.Make:Wipro/Philips/Bajaj /GE/Crompton/Havells/Syska or any equilent make with ISI mark and or as required by EIC during execution. Nos 36.0 0.0 78.0 SITC of 10Watt LED two way (top&bottom) wall washer lights (LED Crystal Living Room Bedroom Hotel Corridor, Facades & Landscapes Aisle Creative Decoration Color Spotlight colour will be decided by EIC during execution (Warmwhite, Blue, Green and Pink etc) for reception area including all required accessories & related work etc.Make: Halonix/Wipro/ Phillips/Halonix/CG/Havells/HPL/Syska. Nos 108.0 0.0 79.0 SITC of wall washer light LED 10W , four way direction, warm white, IP 65/66, Fixture material Aluminium die cast/Aluminium, minimum of 2 years warranty or OEM warranty, whichever is higher, shall be considered. Equivalent to Philips Tetris outdoor Wall washer Product SKU : 919215851297 model outdoor.Make: Halonix/Wipro/Phillips/CG/Bajaj/GE/Crompton/Havells/ HPL any equilent make with ISI mark and or as required by EIC during execution. Nos 16.0 0.0 80.0 SITC of (09-12) Watt Modern Led Bathroom Rose Gold Metal Vanity Picture adjustable & tiltable Mirror Light Wall Lamp, Mirror Lights Cool-day White (6500K) Size of (500-600)MM including all required accessories & related work etc.Make: Wipro/Phillips/CG/Furtune Art/Surya/Havells/HPL/Syska any equilent make with ISI mark and or as required by EIC during execution. Nos 24.0 0.0 A Total from Sl. No. (1 to 80) 0.0 B Add GST @ 18% 0.0 C Total Quoted Amount including GST (Schedule - D) 0.0 BILL OF QUANTITIES / PRICE SCHEDULE NMDC LIMITED (A Government of India Enterprise) NMDC WORKS - KIRANDUL BIOM Kirandul Complex Name of Work : Construction of Transit Guest House at BIOM, Kirandul Complex Tender Enquiry No.: Works-Kirandul/ Transit Guest House/1576/2026/45 Dt: 13/03/2026 MSTC Ref. No.: NMDC/Kirandul/Works/15/25-26/ET/754 Name of the Bidder Sl.NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT SCHEDULE - E FIRE DETECTION AND ALARM SYSTEM 1.0 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the two loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (250 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analogue/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for phone control module, IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Make : IAS Morley, Siemens, Bosch, Honeywell/Notifier, PYROX Nos 1.0 0.0 2.0 Supplying, installation, testing & commissioning of intelligent addressable photothermal/multi sensor detector (It is the combination of Smoke and Heat detector) complete with mounting base complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Notifier Nos 27.0 0.0 3.0 Supplying, installation, testing & commissioning of addressable type fire control module including base and complete as required including accessories. Make : IAS Morley, Siemens, Bosch, Honeywell/Notifier, PYROX Nos 3.0 0.0 4.0 Supplying, installation, testing & commissioning of addressable manual call point with reset option complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell/Notifier, PYROX Nos 8.0 0.0 5.0 Supplying, installation, testing & commissioning of Short Circuit / fault isolator complete with base as required. Make : IAS Morley, Siemens, Bosch, Honeywell/Notifier, PYROX Nos 4.0 0.0 6.0 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder/Hooter complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell/Notifier, PYROX Nos 7.0 0.0 7.0 Supplying and drawing of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene propylene rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.Make: Polycab, Finolex, Havells, KEI, Ancor Mtr 740.0 0.0 8.0 Supplying and fixing of 32 mm Dia medium class PVC conduit along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Mtr 120.0 0.0 A Total from Sl. No. (1 to 8) 0.0 B Add GST @ 18% 0.0 C Total Quoted Amount including GST (Schedule - E) 0.0 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
