|
| 1 | Cables, Earthings |
| 2 | Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 1.5 sq.mm |
| 3 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm |
| 4 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 25 sq.mm |
| 5 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata |
| 6 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 1.5 sq.mm |
| 7 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm |
| 8 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 9 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).(a) In soily strata |
| 10 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 11 | Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required |
| 12 | Supplying, of HDPE pipes at store or site of work including loading, unloading, stacking, transit insurance etc. complete bearing ISI mark &conforming to IS: 4984-1995 & made from PE 100 resin Class IV (6 kg/cm2). Outer dia. 90 in mm |
| 13 | Foundations |
| 14 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.a) All kinds of soil |
| 15 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 16 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing. All works upto plinth level |
| 17 | Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns |
| 18 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V levelM-20 grade of concrete |
| 19 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V levelM-25 grade of concrete |
| 20 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V levelM-30 grade of concrete |
| 21 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 22 | DB's, MCB's, Terminations, wiring/lights |
| 23 | Supplying and fixing following way TPN sheet steel, single door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCCB and busbars of following ways (but without MCBs as required)(a) 4 way (8+12), single door, Vertical type, Cat A |
| 24 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps, including cutting and making good the walls etc. (Internal Work)25 mm nominal bore |
| 25 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A |
| 26 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A |
| 27 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(4) 4 x 10 Sq. mm. |
| 28 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (with)in recessed PVC conduit(medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 29 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A |
| 30 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A |
| 31 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required b) 15/16 A switch Cat A |
| 32 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required d) 6 pin 15/16 A socket outlet Cat A |
| 33 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. |
| 34 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 35 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required. |
| 36 | Supplying & erecting LED 20W tube light fitting (4 feet), 5700K, with CRCA housing, heat sink, with industrial grade heavy duty driver complete Havels Cat stout mini 1200bs 40w led 865 Make Philips / Wipro cat no LL24-541-XXX-57-CD (including lamp) |
| 37 | Supply, installation , testing and commissioning of 12W uplighter including driver of IP 66 as required as directed by the engineer incharge of Colour output: warm white of Make: Atilite, Wipro, Transrail, BMP. |
| 38 | Supply, installation , testing and commissioning of 15W uplighter including driver of IP 66 as required as directed by the engineer incharge of Colour output: warm white of Make: Atilite, Wipro, Transrail, BMP. |
| 39 | Supply, installation , testing and commissioning of Wall washer of 36W including driver of IP 66 as required as directed by the engineer incharge of Colour output: white ofMake: Atilite, Wipro, Transrail, BMP. |
| 40 | Supply, installation , testing and commissioning of Wall washer of 20W including driver of IP 66 as required as directed by the engineer incharge of Colour output: white ofMake: Atilite, Wipro, Transrail, BMP. |
| 41 | Supply, installation , testing and commissioning of 2 mtr corner profile of IP 66 as required as directed by the engineer incharge of Colour output: warm whiteMake: Atilite, Wipro, Transrail, BMP. |
| 42 | Supply, installation , testing and commissioning of 1 mtr corner profile of IP 66 as required as directed by the engineer incharge of Colour output: warm whiteMake: Atilite, Wipro, Transrail, BMP. |
| 43 | Supply, installation , testing and commissioning of decorative wall fixtures of 50W of IP 66 as required as directed by the engineer incharge of Colour output: whiteMake: Atilite, Wipro, Transrail, BMP. |
| 44 | Supply and fixing of junction box of model DK 1000G of size 130X180X77 Hensel box as required as directed by the engineer incharge |
| 45 | Supply and fixing of junction box of model WP 0402G of size 104x104x70 Hensel box as required as directed by the engineer incharge. |
| 46 | supply and laying of 14 SWG copper wire |
| 47 | Supply and Laying of 25mm rigid pvc pipe HMS |
| 48 | Supply, installation , testing and commissioning of outdoor stand mounted feeder pillar IP66 Rated with 32A TPN MCB incomer, single dial timer, 25A cotactor for automatic switching of luminaries .of make L &T/Schneider/Havells /Legrand, incoming 10 sq.mm and outgoing 2.5Sq.mm terminals with outgoing mcbs 6 nos. The panel should be CPRI approved as required as directed by the engineer incharge. |
| 49 | Supply and installation of driver of 150Wmake meanwell, Philips as directed by the engineer incharge |
| 50 | SITC of Decorative 3mtr Height post top GI pole made up of Aluminium with pure Polyster power coating. Pole dia of 60mm with base plate of 200mmx200mm. Having \\"halo\\" ring design fixture of 50W. IP66. with inbuild driver of Philips make. Input surge Protection: 6KV. Power factor: >0.90. CRI: >80. Operating voltage: 80-240V AC, 50-80HZ.Make: Transrail, Wipro, BMP. |
| 51 | Supply, fixing, testing and commissioning of 350W LED flood light luminiare IP 66 optic compartment, pressure die cast aluminium housing, control gear compartment, frame with toughened glass with luminious efficacy >115 lumen/W at ta 25 deg c.in built surge protection upto 10kV as required and directed by engineer incharge. Make Transrail,Wipro, Atilite. |
| 52 | Supply, fixing, testing and commissioning of 50W LED flood light luminiare IP 66 optic compartment, pressure die cast aluminium housing, control gear compartment, frame with toughened glass with luminious efficacy >115 lumen/W at ta 25 deg c.in built surge protection upto 10kV as required and directed by engineer incharge. Make Transrail,Wipro, Atilite. |
| 53 | Supply, installation, Testing and commisioning of 20 mtr high mast system with head frame, galvanized lantern carriage. Mast shaft shall be in two sections, hot dip galvanized and suitable for 44(MTR/Sec) wind velocity as per IS 875, the mast shall have an integral powertool installed inside the base compartment for its operation. It shall include accessories for high mast including steel wire rope 6 mm dia(7/19 construction ), trailing cable (5 core 2.5 sq.mm), double drum winch, connector, integral power tool motor, manual handle for lowering and rasing mechanism, junction, box etc. complete as required and directed by Engineer Incharge. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. |
| 54 | Supply, installation, testing and commisioning of 12.5 M High Mast with head frame, Mast shaft shall be in two sections, hot dip galvanized (Avg microns on HM shall be 100 microns taking into consideration of Coastal Beach line) suitable for wind speed 44m/sec wind velocity as per IS 875,galvanized luminaries carriage suitable to install 6-8 nos.luminaries (350 W fixtures) in symmetrical arrangement, the mast shall have an integral powertool installed inside the base compartment for its operation, lightning finial along with the other accessories like double drum winch, 6 mm diameter SS wire rope,trailing cable (5 core 2.5 sq.mm),, connector, integral power tool motor, manual handle for lowering and rasing mechanism, junction, box etc. complete as required and directed by Engineer Incharge. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. |
| 55 | Supply of 9M high mast shaft in Single sections suitable for wind speed 47m/sec. with head frame, luminaries carriage suitable to install upto 6 nos. luminaries in symmetrical arrangement, lightning finial,along with Supply of Accessories required such as double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. (Supply of bottom MCBs, top Junction box, top distribution cable for light fixture and cables from panel to the base of the mast shall not be in our scope)Make: Transrail, RR ISPAT, Vakrangee, Valmount. |
| 56 | Supply, installation, testing and commisioning of foundation bolts for 20mtr High Mast manufactured from special steel along with nuts, washers, anchor plate and suitable template complete as required and directed by Engineer Incharge. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. |
| 57 | Supply, installation, testing and commisioning of foundation bolts for 9mtr and 12.5mtr High Mast manufactured from special steel along with nuts, washers, anchor plate and suitable template complete as required and directed by Engineer Incharge. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. |
| 58 | Supply, installation, testing and commisioning of of single dome aviation obstruction light complete as required and directed by Engineer Incharge. Make :- Transrail, RR ISPAT, Vakrangee, Valmount. |
| 59 | SITC of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial timer, 25A cotactor for automatic switching of luminaries , power tool control with 2 no. 9A contactors and raise lower push button, incoming 35 sq.mm and outgoing 16 & 2.5Sq.mm terminals with outgoing mcbs 6/8 nos. With Meter provision. Please Enable Macros to View BoQ information |
