|
| 1 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 2 | Material and labour in repair for 18mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE) |
| 3 | Material and labour in repair for 12mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE) |
| 4 | Supply and fixing of 40 mm continuous (piano) hinges, brass bright finish complete all as specified and directed. |
| 5 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 6 | Supply and fixing of 2nd class softwood in scantling clean swan timber framed and fixed to the position complete all as specified and directed. |
| 7 | Material and labour for preparation of new or previously untreated surfaces of wood of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 8 | Supply and fixing for approved high precision soft close telescopic channels of make : Kaff, Hittachi, lafle or approved equivalent of 45 kg capacity to be desigined as min length of 20 inch ensure smooth movements of drawer complete all as specified and directed. |
| 9 | Supply and fixing for 5 mm dia 304 grade stainless steel cutlery basket size (19\\"x20\\"x4\\") att complete all as specified and directed. |
| 10 | Supply and fixing for 5 mm dia 304 grade stainless steel cup & saucer basket size (19\\"x20\\"x4\\") att complete all as specified and directed. |
| 11 | Supply and fixing for 5 mm dia 304 grade stainless plain basket size (19\\"x20\\"x6\\") att complete all as specified and directed. |
| 12 | Supply and fixing for 5 mm dia 304 grade stainless plate basket size (19\\"x20\\"x6\\") att complete all as specified and directed. |
| 13 | Supply and fixing for 5 mm dia 304 grade stainless thali basket size (19\\"x20\\"x8\\") att complete all as specified and directed. |
| 14 | Supply and fixing for 5 mm dia 304 grade stainless plain basket size (19\\"x20\\"x8\\") att complete all as specified and directed. |
| 15 | Supply and fixing for stainless steel bottle pull out basket (8\\"x20\\"x21\\") att complete all as specified and directed. |
| 16 | Supply and fixing for stainless steel handle 150mm complete all as specified and directed. |
| 17 | Supply and fixing for stainless steel magnetic catcher 50 mm for cupboard complete all as specified and directed. |
| 18 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed. |
| 19 | Supplying and fixing 15mm bore steel water tubing galvanized 15mm bore, medium grade including fitting fixed to walls and ceiling or in floor complete with necessary fittings complete all as specified and directed. |
| 20 | Dismantling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed. |
| 21 | Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n.exe 0.18 sqm , as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing area over and including 15mm thick screed bed or bedding of cement mortar (1:6) complete all as specified and directed. |
| 22 | Material and labour for glazed ceramic digital tiles 300x450x7mm/ 300x600x7mm thick coloured/printed as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over and including 15 mm thick cement screeding (rendering) in CM (1:4) complete all as specified and directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in mortar complete all as specified and directed. |
| 24 | Material and labour 18-20mm thick machine cut granite (of any type) fixed on kitchen platform etc over & including 10mm thick screed bed in CM (1:4) and jointed with grey cement slurry along with 12mm thick in CM 1:3 in vertical surfaces and pointing with white cement 1:2 using marble dust and pointed with white cement and admixture of pigment to match the shade of granite stone including with cutting and polished complete all as specified and directed. |
| 25 | Material and labour for rounding to edges of granite stone slab for kitchen platform etc one edge complete all as specified and directed. |
| 26 | Taking down cement plaster of any description including racking out joints, scrabing for key, scrubbing down with water etc and exposing completely upto brickwork complete all as specified and directed. |
| 27 | Material and labour for rendering 10 mm thick on fair faces of brick work surfaces in internal wall with CM (1:4) finished smooth and even without using extra cement complete all as specified and directed. |
| 28 | Material and labour for rendering 5 mm thick on fair faces of brick work surfaces in ceiling with CM (1:4) finished smooth and even without using extra cement complete all as specified and directed. |
| 29 | Material and labour for preparation of plastered or unplastered old decorated surface of wall including pilaster and cornices etc and applying two coats of plastic emulsion paint on over a layer of wall care putty on wall complete all as specified directed. |
| 30 | Material and labour for preparation of plastered or unplastered old decorated surface of ceiling including pilaster and cornices etc and applying two coats of plastic emulsion paint on over a layer of wall care putty on wall complete all as specified and directed. |
| 31 | Supply and fixing in repair 15 mm dia CP fancy type stop valves, cast copper alloy screwed pressure with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 32 | Supply and fixing in repair for brass CP sink mixer flexible with swinging spout (table mounted) for mixing hot and cold water screwed down for iron pipe 15mm complete all as specified and directed. Make : Jaguar (COP-213BPM), ESSCO (SQT-527S). |
| 33 | Supply and fixing stainless steel sink in repair with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm . MAKE:- CERA (B4512123M), PARRYWARE (WPC857372), NIRALI (ORRA ULTRA BG BIG). |
| 34 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 35 | Demolishing of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and disposal of material within 50 metres lead complete all as specified and directed. |
| 36 | Removing existing water proofing APP/blace top treatment and removing rubbish material out side of site. complete all as specified and directed. |
| 37 | Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 38 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 39 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 40 | Material and labour for cement concrete type B-0 , 1:2:4 (Using 12.5 mm graded aggregate) in roof kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 41 | Material and labour for high performance hybrid polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range 400% to 600%. (b) Tensile strengthof 8-12N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) Hardnes (Shore \\"A\\" ASTM D2240) of range 50-70.The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. A sample has to be prepared by applicator before starting of work on ground and this sample to be approved by GE. Make- SIKA/FOSROC/Asian Paints/Berger.Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose. (b) Contractor has to bring entire quantatity (as per manufacturer instruction for coverage area per unit of material) of water proofing material in one go and to be deposited in MES store. MES JE will issue material for use at site on daily basis and all empty cane shall be kept in MES store untill entire work of water proofing is completed as per CA.(c) Contractor shall submit original purchase voucher as soon as material arrived at site, for verification of required quantity of material as per manufacturers instruction. |
| 42 | Material and labour for rendering 15 mm thick on fair faces of brick work surfaces in internal wall with CM (1:4) finished smooth and even without using extra cement complete all as specified and directed. |
| 43 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 44 | Supply and fixing in replacement of 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, fixed to walls height upto 12mtr by scaffolding complete all as specified and directed. |
| 45 | Supply and fixing of 150 mm PVC (SWR) bends complete all as specified and directed. |
| 46 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work upto the height 12m of approved complete all as specified and directed. |
| 47 | Material and labour for reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) chajjas upto the height 12m of approved complete all as specified and directed. |
| 48 | Mild steel (TMT) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips upto the height 12m of approved complete all as specified and directed. |
| 49 | Material and labour for formwork (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) rough finished of concrete upto the height 12m of approved complete all as specified and directed. |
| 50 | Dismantling wrought iron or mild steel work of any description not otherwise provided upto the height 12m of approved complete all as specified and directed. |
| 51 | Supply and fixing roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats upto the height 12m of approved etc. Fe-410-W(Gde-E-250) quality-B complete all as specified and directed. |
| 52 | Material and labour for preparation of new or previously untreated steel surface of any description two coats of synthetic enamel paint over and including a coat of red oxide primer on steel surfaces , n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 53 | Supply and fixing of mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,10cm and n exc 15cm long, diameter of neck 16 to 20 mm upto the height 12m of approved complete all as specified and directed. |
| 54 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including nainital or similar pattern roof coverings upto the height 12m of approved complete all as specified and directed. |
| 55 | Supply and fixing of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto the height 12m of approved complete all as specified and directed. |
| 56 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed. |
| 57 | All as per item No 56 above but exc. 1.5 Sqm and n.exc. 4 Sqm each complete all as specified and directed. |
| 58 | Taking down shutters of any description exc. 1 Sqm and n.exc. 2 Sqm each complete all as specified and directed. |
| 59 | Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and directed. |
| 60 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed. |
| 61 | Supply and fixing factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed. |
| 62 | Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening complete all as specified and directed. |
| 63 | Supply and fixing factory made ERW section window box type ('P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazed or gauzed) complete all as specified and as directed. |
| 64 | Supply and fixing aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 65 | Supply and fixing aluminium anodized handle of extruded section 150mm long complete all as specified and directed. |
| 66 | Supply and fixing 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 67 | Supply and fixing 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 68 | Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in filling of pressed steel chowkats, bed plates, hold fast, lacing course coping, bed blocks complete all as specified and directed. |
| 69 | Supply and fixing 35mm thick 1st class softwood (hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members complete all as specified and directed. |
| 70 | Supply and fixing 35mm thick 1st class softwood (hollock) factory made framed, panelled shutter (three panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 71 | Supply and fixing 300mm mild steel sliding door bolts, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 72 | Supply and fixing MS barrel tower bolt stove enameled black with bright bolt 200mm long complete all as specified and directed. |
| 73 | Supply and fixing mild steel pressed handle stove enameled black 150mm complete all as specified and directed. |
| 74 | Supply and fixing aluminium anodized door stopper 140mm long overall length complete all as specified and directed. |
| 75 | M S butt hinges 100 mm medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 76 | Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 77 | Supply and fixing in repair of 4 mm thick sheet glass, selected quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness,size quality or description) from wooden complete all as specified and directed. |
| 78 | Material and labour for preparation of new or previously untreated surfaces of wood of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 79 | Supply and fixing in repair MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
