|
| 1 | Demolition of brick work built in cement mortar complete all as specified and as directed |
| 2 | M&L brick work with sub class 'B'brick straight or curved on plan exc 6m mean radius built cement mortar 1:4 complete all as specified and as directed |
| 3 | M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) etccomplete all as specified and as directed. |
| 4 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. |
| 5 | M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed |
| 6 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 7 | M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed |
| 8 | M&L for complete removal of existing treatment of any description from wall complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment of any description from ceiling complete all as specified and directed. |
| 10 | M&L for applying 1 mm thick wall care putty on wall suface complete all as specified and as directed by the Engr-in-Charge. |
| 11 | M & L for preparation of old plastered surface of walls and applying two coat of oil bound distemper on wall surface as per manufacurers instructions etc complete all as specified and as directed by the Engr-in-Charge. |
| 12 | M&L for applying two coat of white wash on wall suface complete all as specified and as directed. |
| 13 | M&L for applying two coat of white wash on ceiling surface complete all as specified and as directed. |
| 14 | Material & Labour for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engr-in-Charge. |
| 15 | M&L for preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. |
| 16 | M&L for preparation old wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat synthetic enamel paint etc complete all as specified and as directed by the Engr-in-Charge. |
| 17 | Taking down chowkhat or frames with shutters any type (wooden/Alu/Steel) (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 18 | Taking down chowkhat or frames with shutters any type (wooden/Alu/Steel) (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. |
| 19 | S&F Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plateetc complete all as specified and as directed. |
| 20 | M&L Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 21 | M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and as directed. |
| 22 | M & L Secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as directed. |
| 23 | S&F 18/19 mm thick prelaminated particle board interior grade prelaminated (celuka ply )one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work including piano hinges & magnet door catcher for each shuttter etc complete all as specified and as directed by Engr-in-Charge. |
| 24 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete. |
| 25 | M&L, aluminium Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Please Enable Macros to View BoQ information |
| 26 | M&L, aluminium Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Please Enable Macros to View BoQ information |
