|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M&L for Non Skid coloured ceramic tiles (600x600mm) 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed |
| 3 | M&L for Non Skid coloured ceramic tiles (300x300mm) 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed |
| 4 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed |
| 5 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 6 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed |
| 7 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed by Engr-in-Charge. |
| 8 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 9 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. |
| 10 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 complete all as specified and as directed. |
| 11 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 12 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 13 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and as directed. |
| 14 | M&L plain aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 16 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed. |
| 17 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 18 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 19 | S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed |
| 20 | M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed |
| 21 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 22 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified |
| 23 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of water proofing compound, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 24 | M&L for preparation of newly plastered surface of wall and applying two coats of Royal Emulsion Paint of approved shade over a coat of average 2mm thick wall care putty to make the surface smooth complete all as specified and directed |
| 25 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 26 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 27 | M&L for applying two coats of Royal Emulsion Paint of approved shade over a coat of average 2mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed |
| 28 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 29 | S&F Factory made single extruded WPC (Wood PolymerComposite) UV coated solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, in kitchen cupboards and room wardrobes shutter all as per direction of Engineer. Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) |
| 30 | M&L for aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete as specified |
| 31 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 32 | S&F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed |
| 33 | S&F 100mm size stainless steel butt hinges medium weight complete all as specified |
| 34 | S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised all as specified |
| 35 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified |
| 36 | S&F Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed. |
| 37 | S&F 250mm long stainless steel sliding door bolt with hasp and staple and fixing bolts complete all as specified |
| 38 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and as directed. |
| 39 | Supply only sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 40 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified |
| 41 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed |
| 42 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 43 | Hacking out old broken glass(any thickness, size, quality or description) from wooden frames /steel frame/aluminium frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads all as specified and directed . |
| 44 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 45 | Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 46 | Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed |
| 47 | Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity and removing to store complete all as specified complete all as specified and as directed. |
| 48 | S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 49 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 50 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 51 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 52 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 53 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 54 | S&F in repairs 20mm dia bore pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms)Complete all as specified |
| 55 | S&F in repairs 25mm dia bore pipe Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as required complete all as specified. |
| 56 | S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified |
| 57 | M&L for 16-18mm thick granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screed bed in CM 1:4 including grinding/chamfering and polishing the edges complete all as specified and as directed by Engr-in-Charge |
| 58 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed |
| 59 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified |
| 60 | S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified |
| 61 | S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified |
| 62 | S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified |
| 63 | S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 64 | S&F for Two way Bib Cock complete all as specified and as directed.MAKE: Jaquar Code : ACN-CHR-1193N1 or equivalent in Prayag / Leader /Zoloto |
| 65 | S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 66 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed |
| 67 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 68 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 69 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed |
| 70 | S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal reducer 'T' 110mm to 75mm dia and jointed with approved adhesive complete all as specified |
| 71 | S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed |
| 72 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed |
| 73 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 74 | S&F PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 75 | S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe complete all as directed |
| 76 | S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia flexible pipe suitable for WHB/sink/urinal etc complete all as specified |
| 77 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 78 | S & F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 79 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed |
| 80 | M&L for aluminum composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame made up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exc 1200x1200mm with necessary silicon filling in approved patten as in columns,beams, wall etc complete all as specified and as directed Make : Aluco Bond / Alstone / Aludecor / Aluminium Tech Industries.Note: Necessary scaffolding required for the work upto three stroreyed bldg shall be deemed to inclued in the unit rate quoted. |
| 81 | S & F brass body 4 levers vertical/ round type mortice night latch of size 100mm complete all as specified and as directed. |
| 82 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed. |
| 83 | M&L for providing 50mm thick cement concrete 1:2:4 type B2 (Using 20mm graded stone aggregate) as in floor/paving etc including finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed. |
| 84 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 85 | M&L for heavy duty Non skid tiles of size 300x300x9mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 86 | Dismantling structural steel work of any description and in any position etc complete all as specified and as directed. |
| 87 | M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. |
| 88 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) complete all as specified and as directed. |
| 89 | S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge |
| 90 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 complete all as specified and as directed. |
| 91 | PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and as directed. |
| 92 | M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and as directed. |
| 93 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 94 | Erection and fixing only of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Post, Beam, Tee, Angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified. Note : Retreived material from dismantling/demolition to be used complete all as specified and as directed. |
| 95 | Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed. |
| 96 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 97 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : V-Marc/Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. |
| 98 | Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 99 | All as per item Sl No 97 above, but ,for One light/fan point controlled by one modular switch 5 Amps one way complete all as specified and directed. |
| 100 | All as per item Sl No 97 above, but ,for two light point controlled by one switch 5 Amps one way complete all as specified and directed. |
| 101 | All as per item Sl No 97 above, but , for one modular 3 pin 5 Amp socket out let on independent board complete all as specified and directed. |
| 102 | All as per item Sl No 97 above, but , for one modular 3 pin 5 Amps socket outlet on same Board complete all as specified and directed. |
| 103 | All as per item Srl No.97 above, but ,point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 104 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 105 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.Make : Roma (Anchor)/ Legrand/ Havells |
| 106 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 107 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed.Make : Roma (Anchor)/ Legrand/ Havells |
| 108 | S & F stepped type electronic fan regulator modular type complete all as specified and as directed.Make : Roma (Anchor)/ Legrand/ Havells |
| 109 | S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified and as directed. |
| 110 | Supply & fix Modular Ac Box With 20A DP MCB \\"C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent in L&T / Havells |
| 111 | S & F of LED slim panel lighting fixture of 18 Watt recess mounted 220V , 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker Cat Part No : LNPR18 or equivalent make in CG/ Philips/ Havells. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting . |
| 112 | S & F and testing Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT522 or equivalent to CG/Philips Havells |
| 113 | Supply and fixing and testing Mirrior light fitting of cap 20 watt with all fixing arrangements all as specified and directed. Make-Havells cat no LHLDESAARANC020 or equivalent to Philips/ CG |
| 114 | Taking down carefully ceiling fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed. |
| 115 | Taking down carefully Exhaust fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed. |
| 116 | M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 sq mm single core 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed/surface conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLSH copper conductor single core cable of same size but green in colour as continuous earthing wire all as directed. |
| 117 | All as per item Sl No 111 above, but , sub main wiring with 2 single core 6.0 sq mm duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire.Note for item No 111 & 112 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length. |
| 118 | Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 119 | Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 113.0 to 114.0:- All copper conductors should be connected with MCCB/ MCB alongwith copper reducer terminals of suitable size duly crimpled.” Please Enable Macros to View BoQ information |
