|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Supply and fixing pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L or J hook as specified and directed. |
| 3 | Supply and fixing pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) , complete all as specified and directed. |
| 6 | Material and labour for virified Ceramic tiles shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | Material and labour for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | Material and labour Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x350x7 mm thick including 10mm rendering (cement mortar 1:6) set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 9 | Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 10 | Demolition of cement concrete (un reinforced) in ground floors and paving exc. 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 11 | Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even , complete all as specified and directed. |
| 12 | Materials and labour for 75 mm thick plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even , complete all as specified and directed. |
| 13 | Material and labour rendering 15mm thick (cement mortar 1:4)on fair/unfair faces of brick or concrete surfaces surfaces finished even & smooth without using extra cement complete all as specified . |
| 14 | Material and labour priming surfaces and applying heavy treatment (for severe condition ) using glass bibre base bitumen felt grade 2 complete all as specified and directed. |
| 15 | Material and labour for priming plastered and other surface with alkali resistance priming paint complete all as specified and directed. |
| 16 | Materials and Labour for 250 mm thick plain cement concrete (1:4:8) type B-2 using 20 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even , complete all as specified and directed. |
| 17 | Material and labour for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge |
| 18 | Material and labour for rendering 15mm thick (cement mortar 1:6)on fair/unfair faces of brick or concrete surfaces surfaces finished even & smooth without using extra cement complete all as specified . |
| 19 | Material and labour rendering 15mm thick (cement mortar 1:4)on other than fair faces of brick or concrete surfaces surfaces finished even & smooth without using extra cement complete all as specified . |
| 20 | Material and labour for providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified. |
| 21 | Material and labour for preparation of old plastered/treated surfaces and applying one coat of oil bond distemper on old plaster surface in any height complete all as specified and directed. |
| 22 | Material and labour for two coats of oil bound distemper over Chalk whiting, on plastered surfaces,prepara-tory to distempering in any height complete all as specified and directed. |
| 23 | Material and labour for proparation of old plastered/treated surface and applying one coats of cement base paint on old plaster surface in any height complete all as specified and directed. |
| 24 | Material and labour for proparation of old plastered/treated surface and applying one coat of cement base paint on old plaster surface in any height complete all as specified and directed. |
| 25 | Demolation of brick /stone/block masonry built in cement mortar complete all as specified and directed. |
| 26 | Material and labour for brick work with sub class B bricks, old size, straight and curveed on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 28 | Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed. |
| 29 | Supply and fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed. |
| 30 | Taking down chowkhats or frame (with taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sq m each, complete all as directed. |
| 31 | Taking down chowkhats or frame with shutters (with taking off shutters from the frame) n.exceeding 1.50 Sqm, complete all as directed. |
| 32 | Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, Supply and fixing in opening as per specification and drawing complete all as specified and directed. |
| 33 | Supply and fixing factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed. |
| 34 | Supply and fixing 2nd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 35 | Material and labour for 18 /19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 36 | Supply and fixing anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 37 | Material and labour for anodiezed aluminium window and ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55kg/m including neccessary joining cleat, glazing clips, rubber packing anodised andodised aluminium snap beading screws etc complete including taking down old windows all as specified. |
| 38 | Supply and fix aluminum door shutters aluminium section weighing 0.55kg/m including neccessary joining cleat, glazing clips, rubber neoprence packing, handles 2 nos in each door, hingings, andodised aluminium snap beading screws etc complete all as specified. |
| 39 | Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width 30mm complete all as specified and directed. |
| 40 | Supply and fixing Locks for cupboard, grade I, size 50 mm in 2 (layer brass) complete all as specified and directed. |
| 41 | Supply and fixing PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed by Engineer-in-charge. |
| 42 | Supply and fixing PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specfication complete all as specified and directed. |
| 43 | Material and labour for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with poder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c and applying two coats of OBD to the ceiling board complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fix aluminium anodized barrel tower bolts of extruded section, 125mm long, complete all as specified and directed. |
| 45 | Supply and fix aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed. |
| 46 | Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and directed. |
| 47 | Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 100mm long, complete all as specified and directed. |
| 48 | Supply and fix Aluminium handles, cast type, anodized, 100 mm size , complete all as specified and directed. |
| 49 | Demolition of cement concrete (reinforced) in Roof, floor (other than ground floors), beams, staircase, landing chajjas and similar suspended works complete all as specified and directed. |
| 50 | Material and labour for TMT bars mild steel bars 10mm dia and over cut to length bent to shape required including ranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specfied and directed. |
| 51 | Material and labour Mild steel TMT bars 5mm dia and over upto and including 10mm dia, as in stirrups, spaces and binders, cut to length bent to shape required complete all as specfied and directed. |
| 52 | Material and labour form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 53 | Material and labour for RCC 1:2:4, using 20mm graded stone aggregate, type B1 as in foundation, including rafts footings, foundation beams, plinth beams: bases for columns, etc: basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 54 | Material and labour formwork to sides and soffits of floor or roof beams beam haunching girders, bressummers lintels cantilevers, shelves including sup ports overhangs etc also splays between floors and beams etc all as specified and directed. |
| 55 | Material and labour for RCC 1:2:4, using 20mm graded stone aggregate, type B1 as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 56 | Material and labour formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 57 | Material and labour for RCC 1:2:4, using 20mm graded stone aggregate, type B1 as in columns pillars, piers, posts and struts complete all as specified and directed. |
| 58 | Material and labour formwork to chullah hoods chajjas troughs and simila items in cluding edges complete all as specified and directed. |
| 59 | Material and labour for RCC 1:2:4 using 20 mm graded stone aggregate as in Chajjas, type B1complete all as specified and directed. |
| 60 | Material and labour formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick on drain complete all as specified and directed. |
| 61 | Material and labour for RCC 1:2:4, type B1 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs landings, balconies canopies deck slabs and in shelves complete all as specified and directed. |
| 62 | Demolation of stone slabs and tiles of any descripton or thickness in floors aprons etc complete all as specified and directed. |
| 63 | Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 64 | Material and labour for machine cut Kota stone slab flooring 20-25mm thick over cemnt screed base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing an polishing complete all as specified and directed. |
| 65 | Demolition and breaking up drain pipes and fittings of internal dia 75 to 100 mm and under (CI, PVC, AC etc ) set in cement mortar complete all as specified and directed. |
| 66 | Supply and fixing 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 67 | Supply and fixing 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 68 | Supply and fixing 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 69 | Supply and fixing 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors complete all as specified and directed. |
| 70 | Supply and fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 71 | Supply and fixing 110mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed. |
| 72 | Supply and fixing 75 mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed. |
| 73 | Supply and fixing 110mm PVC (SWR) junction single,(Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 74 | Supply and fixing 75mm PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 75 | Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed. |
| 76 | Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified and directed. |
| 77 | Supply and fixing 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply and fixing 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixinging as in repair vitreous china squatting pan of orrisa pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. |
| 80 | Supply and fixing in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe including Heath fusset etc complete all as specified and directed |
| 81 | Supply and fixing in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed |
| 82 | Supply and fixing in Table top Basin Size 520X360X125mm FLS WHT-5931complete all as specified and directed. |
| 83 | Supply and fixingin repair vitreous china urinals, bowl flat back, size 465x355x265mm white (Minimum), with type (back or corner wall type), complete including providing an fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe,excluding of fixing supply pipe to flushing cistern, tap and waste pipe complete all as specified and directed |
| 84 | Supply and fixing in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed. |
| 85 | Supply and fixing in repair looking mirror size 600x450x5mm selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer incl aluminium frame complete all as specified |
| 86 | Supply and fixing in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified. |
| 87 | Supply and fixing in repair chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified. |
| 88 | Supply and fixing in repair 15mm over head shower size 125mmx125mm with arm complete all as specifed. |
| 89 | Supply and fixing in repair single lever wash hand basin mixer complete all as specified and directed . |
| 90 | Supply and fixing in repair CP wall mixer chromium plated (3 in 1) with arrangement for both teleponic shower and overhead shower complete all as specified and directed. |
| 91 | Supply and fix in repair 32 mm dia PVC waste pipe for WHB 90 cm long with union, complete all as specified and directed. equivalent). |
| 92 | Supply and fixing in repair Swivel towel holder twin type CAN-1115S complete all as specified and directed. |
| 93 | Supply and fixing in 2 way Bib cock with wall flange KUP-35041PM.complete all as specified and directed. |
| 94 | Supply and fixing in Toilet Roll Holder with stainless steel Flap complete all as specified and directed. |
| 95 | Supply and fixing in soap dish recessed type complete all as specified and directed. |
| 96 | Supply and fixing in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed |
| 97 | Supply and fixing in repair aluminium door closer hydraulically regulated designation No 1 unversal type suitable for door shutters up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed. |
| 98 | Supply and fixing in repair Powder coated stainless steel drapery rod of 25mm inner dia ( in length as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated stainless steel bracket complete all as specified. |
| 99 | Supply and fixing presssed steel size frames 105 X 60 MM for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc complete as apecified |
| 100 | Supply and fixing, 40mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 101 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and directed by Engr-in-Charge. |
| 102 | Material and labour for cement conc. 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified. |
| 103 | Returning, filling in including spreading, leveling, watering and well ramming in layers in not exc 25 cm complete all as specified and directed |
| 104 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed |
| 105 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 106 | Material and labour for cement conc. 1:2:4 type B2 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified. |
| 107 | Supply and fixing framed work such as grills gratings etc with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings frame work of water tanks and similar work conforming to Fe.290 Gde-E-165 all as specified and directed. |
| 108 | Material and labour for Two coat of synthetic enamel paint over a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth incl all complete all as specified |
| 109 | Material and labour for steel work in tubular trusses including special shaped waher etc complete using EWR or induction butt welded tubes conforing to I.1161-1979 graded st 240 complete all as specfied and directed. |
| 110 | Material and labour for PCC (1:3:6) Type C-2 as in concrete bed drain pipes of150mm thick bore including packing under, and haunching against the sides of pipes after ther are laid and tested complete all as specfied and directed. |
| 111 | Supply and fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting unoin to pipe overall size 915mm x 460mm bowl size 410mm x330mmx 160mm complete all as specfied and directed. |
| 112 | Dismantling water tanks exceeding 1000 and n exc 2000 ltr and removing to store complete all as specified and directed. |
| 113 | Supply and fixing 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete |
| 114 | Supply and fixing 2000 ltrs capacity Rotational moulded polyethylene water storage tanks, Triple layered (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete all as specified and directed. |
| 115 | Material and labour for Prepolished cement concrete chequered tiles of size 300mm by 300mm by 25mm thick parallelogram of in any shape of any tint, heavy duty, set jointed and pointed with grey cement slurry @2.5 kg per sqrare metre complete all as specified and as directed. |
| 116 | Taking down carefully unserviceable aluminum/copper point wiring (light/ fan/ socket/ power) complete including fittings such as switches, sockets, ceiling roses etc but excluding light fittings and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed by Engineer-in- Charge. |
| 117 | Material and labour for point wiring with 1.5 Sq mm nominal area PVC insulated and sheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed, One light point controlled by one switch one way . ( Note:- modular white cover and plate with frame will be measured and paid saperately under respective item) |
| 118 | All as per item No 117 here-in-before but One celling / Exhaust fan point controlled by one switch one way. |
| 119 | All as per item No 117 here-in-before but One socket out let 5 Amps 5 pin on independent board. |
| 120 | All as per item No 117 here-in-before but One socket outlet 5 Amps 5 Pin on same board with other switches |
| 121 | All as per item No 117 here-in-before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (circuit to be laid seperatly ) |
| 122 | Supply and fixing modular socket outlet 2/3 pin, 16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 123 | Supply and fixing modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Supply and fixing modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Supply and fixing modular socket outlet 2/3 pin, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Supply and fixing electronic Fan step regulator modular 110 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed by the Engineer-in-Charge. |
| 127 | Supply & fixing white colour modular cover plate with frame, 1 module for fixing of modular switches complete all as specified and as directed. |
| 128 | Supply & fixing white colour modular cover plate with frame, 2 module for fixing of modular switches complete all as specified and as directed. |
| 129 | Supply & fixing white colour modular cover plate with frame, 3 module for fixing of modular switches complete all as specified and as directed. |
| 130 | Supply & fixing white colour modular cover plate with frame, 6 module for fixing of modular switches complete all as specified and as directed. |
| 131 | Supply & fixing white colour modular cover plate with frame, 8 module for fixing of modular switches complete all as specified and as directed. |
| 132 | Supply & fixing white colour modular cover plate with frame, 12 module for fixing of modular switches complete all as specified and as directed. |
| 133 | Supply & fixing white colour modular cover plate with frame, 16 module for fixing of modular switches complete all as specified and as directed. |
| 134 | Supply and fixing modular blanking plate, 1 module complete all as specified and as directed by the Engineer-in-Charge. |
| 135 | Supply and fixing in repair ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge. |
| 136 | Supply and fixing in nrepair ceiling fan antisuicidal rod of 24\\", with safety mechanism activates on over excess load, preventing misuse complete all as specified and as directed by Engineer-in-Charge. |
| 137 | Taking down old unserviceable DB and supply & fixing MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail complete including making good disturbed surfaces of walls, floors, etc. complete all as specified. |
| 138 | Supply and fixing as in repair MCB single pole, 240 volt, 6 to 32 amps, 10 KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Supply and fixing MCB single pole, 240 volt, 6 to 32 amps, 10 KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 140 | Supply and fixing MCB SPN, 240 volt, 32 amps, 12 KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Supply and fixing MCB SPN, 240 volt, 40 amps, 12 KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Supply and fixing MCB Triple Pole, 63 Amps, 10 KA rating, 415 Volts C Curve type complete all as specified and as directed by Engineer-in-Charge. |
| 143 | Supply and fixing MCB Triple Pole & Neutral, 63 Amps, 10 KA rating, 415 Volts C Curve type complete all as specified and as directed by Engineer-in-Charge. |
| 144 | Supply and fixing MCB Triple Pole & Neutral, 100 Amps, 10 KA rating, 415 Volts C Curve type complete all as specified and as directed by Engineer-in-Charge. |
| 145 | Supply and fixing in repair sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 25 Amp 240 volt complete all as directed. |
| 146 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including complete all as specified and directed. |
| 147 | Supply & fixing electric water heater(Geyser), storage type, steel body with copper inner tank, heating element of 2KW, storage capacity 25 litre, electrically operated, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, SS connection pipe, temperature control knob etc. including fixing lugs, bolts etc and installation on location by drilling holes and plug to fastners by bolts and rawl plug, including making connection with 3 core flexible copper wire of size 2.5 Sqmm from geyser to metal plug & socket complete all as specified & directed. |
| 148 | Material and labour for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 2.5 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 2.5 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. |
| 149 | Material and labour for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 4 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. |
| 150 | Supply and fixing in repair indoor decorative LED tube light fitting Batten type 1x18/20 W with opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz and including 1x18/20 W LED tube rod luminaries (Warm/Cool as per site requirement) environment friendly, high efficient, T8 with aluminium extrusion heat sink connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. |
| 151 | Supply and fixing in repair LED batten fitting 10-12 watt, 2 feet, 6500K aluminium housing and integrated electronic driver including tube rod cool/warm type industrial model complete connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. |
| 152 | Supply and fixing in repair recessed mounted 3600 lumens, 34/35/36 6500K, 2'x2' LED ceiling light fitting with 60mm width CRCA body, opal acrylic diffuser, electronic driver, system life 50000 hrs @ 70%, PF 0.95, THD <10%, CRI >80,etc and all accessories pre-wired including connecting up complete all as directed. |
| 153 | Material and labour earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15 cm thick packed layer of Charcoal dust & common salt filled in alternate layers and electrode connected to galvanised iron strip 4 mm upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly and including watering pipe medium grade GI 20mm bore & protection GI pipe light grade 15 mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in any type of soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates and pit cover slab 40mm thick shall be of Precast RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates reinforced with XPM weighing not less than 4Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified and directed. Notes:-(i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO.(ii) On testing if the desired earth resistance is not obtained, earthing will be generated at no extra cost , till the desired earth resistance is obtained.(iii) The chamber shall be constructed atleast 1.5 mtr away from the earth electrode |
| 154 | For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum. Please Enable Macros to View BoQ information |
