|
| 1 | Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white wash on wall. |
| 2 | M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth and applying TWO coat of synthetic enamel paint , complete all asspecified. |
| 3 | Preparation of wire mesh surfaces by brushing and applying a coat of synthetic enamel paint on GI wire mesh complete (measured over all one side only). |
| 4 | M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all as specified. |
| 5 | All as per item No 08 above but applying two coats of synthetic enamel paint. |
| 6 | Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed. |
| 7 | M& L a coat of alkali resistant primerover alread prepred surface of walls complete all as specified and directed. |
| 8 | M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls/ ceiling surface finished even and smooth complete all as specified and directed. |
| 9 | M& L for applying two coats of oil bound distemper on wall/Ceiling surface with mechanical /roller brush(as per direction) complete all as specified and directed. |
| 10 | M&L preparation of old plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed |
| 11 | Complete removal exising treatment of old/ new surfaces of wall scrubbing by machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying 2-3 mm birla wall care putty Two coats of weather proofing exterior acrylic emulsion paint of any make over one coat of primer from the same manufacturer white lime wash even and smooth with roller brush complete all as specified and directed. |
| 12 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed |
| 13 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete. |
| 14 | M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed |
| 15 | M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified |
| 16 | M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed |
| 17 | Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA over one coat of primer from the same manufacturer white lime wash complete all as specified and directed. |
| 18 | M&L for new plaster surface two coat of oil bound destemper over 2mm thick of birla white putty including preparation of newly plastered surface etc all as specified. |
| 19 | Hacking out old broken glass of any thickness size quality or description frame wooden frames /Aluminium frame fixed with wooden beads/aluminium beads/steel window and M&L 3.5 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, putty etc complete all as specified |
| 20 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified |
| 21 | Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed. |
| 22 | M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in floors finished even and fair complete all as specified and directed. |
| 23 | M&L Non skid cerermic coloured tiles 300x300X 7 to 8 mm thick (Square/rectangular) area of each tile in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6). |
| 24 | All as per item No 23 above but as in skirting over rendering 10mm thick in cement mortar 1:4. |
| 25 | M&L Vitrified ceramic Light shade coloured tiles 600x600x 9-10mm thick square/rectungular polished area of each tile in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6. |
| 26 | All as per item No 25 above but as in skirting over rendering 10mm thick in cement mortar 1:4. |
| 27 | M&L Glazed ceramic coloured tiles (600X300mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4. |
| 28 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified |
| 29 | Taking down chowkats or frames exc 4 Sqm but not exc. 6 sqm each with shutters (without taking off shutters from frames ), complete all as specified. |
| 30 | Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and removing to or from store |
| 31 | Supply and fixing factory made uPVC white colour Three track panels sliding door with fly proof S.S wire mesh (two Nos, glazed & one no. wire mesh panels) made of (big series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3+_ 0.2mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door above 2.00sqm upto 5sqm comprising of upvc chamfbered frame, with in built roller track and sash extruded profiles duly reinforced woth 1.60+_ 0.2mm thick galvanised mild steel section maid from roll forming process of required length (shape & size according to upvc profile) Appropriate dimension oupvc extruted glazing beads, uPVC extruted interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels alongwith zinc plated mild steel multi point looking having tansmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120kg) GI fastners 100X8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and dirtected by engineer-in charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sah extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptable but no extra payment on this account shall be made. |
| 32 | M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 34 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified. |
| 35 | Anodised aluminium powder coated sliding windows, window shutters and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking system, suitable handle (1 no.) complete all as specified and as directed by Engineer-in- charge. |
| 36 | S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc. |
| 37 | S&F solid PVC door Prelam frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing. |
| 38 | S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) both side prelam clouor consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of both side prelam clouor PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 39 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane. |
| 40 | Supply and fixing PVC wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge. |
| 41 | S&F 150mm long extruded stainless steel handle fabricated type |
| 42 | S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before). |
| 43 | Supply only 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before). |
| 44 | S&F for 150 mm size stainless steel barrel tower bolts of extruded section and fixed to shutter complete |
| 45 | S&F for MS 300mm size, door spring Pencil type rat tail rod pattern springs including roller and roller plate complete. |
| 46 | S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified |
| 47 | Supply&fix in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. |
| 48 | S&F for galvanized stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed . |
| 49 | M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed. |
| 50 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store and S&F 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.' |
| 51 | All as per items No 50 but 20 mm bore. |
| 52 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 53 | S&F in repairs PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets, fixed in repairs. |
| 54 | S&F in repair bathroom mirror 400x600mm decorative mirror selected qualtiy glass, with PVC frame complete all as specified and directed. |
| 55 | S&F chlorium plated shower roses with or without swivel join ts 100mm size incl fixingto steel pipe in repairs |
| 56 | S&F in repair vitreous china Pedastal, for above mentioned item no. 78 complete all as specified and directed. |
| 57 | S & F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 58 | S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed. |
| 59 | Taking down care fully copper/aluminium point wiring from caping/casing or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 60 | Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 61 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 62 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 63 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface PVC conduits as suitable of site (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, 3 mm thick hylem sheet cover for terminal boxes painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. |
| 64 | All as per item No 63 above but one light/fan point controlled by one switch. |
| 65 | All as per item No 63 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 66 | All as per item No 63 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 67 | All as per item No 63 above but One bell point controlled by one bell push. |
| 68 | All as per item No 63 above but One light point controlled by two Nos two way switches |
| 69 | All as per item No.63 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 15 Amps socket out let on independent board. |
| 70 | M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified. |
| 71 | M&L switch piano flush type 5 Amp SP two way. |
| 72 | M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified. |
| 73 | M&L bell push,flush type,5 amp ISI marked complete all as specified. |
| 74 | M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified. |
| 75 | M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified. |
| 76 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 77 | S & F electronic fan regulator 5 step ISI marked connecting complete all as specified. |
| 78 | M&L bell electric (ding dong) 230 volt, SP all as specified and directed. |
| 79 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including in and including concealed / surface PVC conduits as suitable of site Medium grade of ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 80 | All as per item No 73 above but one light /Ceiling fan/exhaust fan point controlled by one switch. |
| 81 | All as per item No 73 above but one bell point controlled by one bell push. |
| 82 | All as per item No 73 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 83 | All as per item No 73 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 84 | All as per item No 73 above but one light point controlled by two Nos two way switches |
| 85 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in and including concealed / surface PVC conduits as suitable of site (Medium grade) of ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 86 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 87 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified. |
| 88 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified. |
| 89 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 90 | M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified. |
| 91 | M&L switch modular type 6 amp SP two way ISI marked complete all as specified. |
| 92 | Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified. |
| 93 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including in and including concealed / surface PVC conduits as suitable of site (Medium grade) not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire. |
| 94 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6.0 Sqmm size stranded conductor as earthwire. |
| 95 | M&L for submain wiring with four run of single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed one run of stranded copper conductor cable of 10 Sqmm size stranded conductor as earthwire. Note:- Four run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 96 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5 KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 97 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 98 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. |
| 99 | S& F in replacement recessed mounting LED FLAT panel 2\\"x2\\" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 100 | Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 150-270V, THD<20%, High and low protection along with a surge protection of 2.5 KV including provision of 25 mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 101 | S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 1.5 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed . |
| 102 | S & F in replacement of decorative type wall mounted luminaire (comet) with under take poly carbonate material suitable for 1 x 12 watts LED bulb B-22 base complete all as specified and as directed.Note : rate quoted of one (01) No of LED bulb of 12 watts including in this fittings |
| 103 | S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete. |
| 104 | S & F LED bulb 12 watts, 900 lumens output, 6500K suitable for B-22 base . |
| 105 | Refixing of Ceiling fan / exhaust fan/ fresh air including taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only. |
| 106 | M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 107 | S&F in replacement capacitor of 3.15 MFD. |
| 108 | S&F in replacement gun metal bush of any size and make sutiable for ceiling fans 1200 mm compete all as specified and directed. |
| 109 | S&F in replacement ball bearing No. 6202./6203 |
| 110 | S&F in replacement worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed. |
| 111 | S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed. |
| 112 | M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed. |
| 113 | S&F in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 114 | S&F in replacement exhaust fan copper motor capacity 230 volts, AC, 50 Hz suitable for 450 mm size exhaust fan complete all as directed. |
| 115 | S&F in replacement fresh air fan copper motor capacity 230 volts, AC, 50 Hz suitable for 200/250 mm size fresh air fan complete all as directed. |
| 116 | Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only. |
| 117 | S&F in replacement only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed. |
| 118 | S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. |
| 119 | S&F in replacement heating element of 2 KW triangular type with nut bolt washer complete all as directed. |
| 120 | M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 121 | M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed. |
| 122 | Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed. |
| 123 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet. |
| 124 | Supply and fix MCB DB SPN 10 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet. |
| 125 | M&L MCB SPN 40 Amp \\"C \\" curve all as directed. |
| 126 | M&L MCB SP 6 to 32 Amp \\"C\\" curve all as directed. |
| 127 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-54 protection), mechanical impact strength IK - 09, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately. |
| 128 | M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete all as specified & dirceted by Engineer-in-Charge |
| 129 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete. |
| 130 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 131 | S&F exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete Make: Orient/Havells/CG |
| 132 | S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 133 | S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep (against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note: BLDC Fan should work through electronic fan regulator. |
| 135 | Supply & Fix all accessories of PCB BLDC ceiling fan including remote any type, any make & any capacity, including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge |
| 136 | S & F PVC canopy upper & lower of ceiling fan of any size & make complete with nuts, bolts & washers complete all as specified & directed by Engineer-in-Charge |
| 137 | Taking down old unsv downrod and S & F 1.5/2 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 138 | Taking down old unsv down rod and S & F 3 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 139 | S & F in replacement only of ceiling fan housing body parts complete all as specified and as directed by Engineer-in-Charge |
| 140 | S & F in replacement only spring of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 141 | S & F in replacement only motor screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 142 | S & F in replacement only capacitor clamp of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 143 | S & F in replacement only blade screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 144 | S & F in replacement only rubber clamp of ceiling fan with nuts, bolts & washers & safety pin complete all as specified and as directed by Engineer-in-Charge |
| 145 | S & F in replacement PVC cable copper conductor multistranded flexible wire 23/0.0076 twin core & making connection from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge |
| 146 | Schedule of Credit Please Enable Macros to View BoQ information |
