|
| 1 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:5 in walls work up to V floor level, using best quality solid concrete blocks including cost & conveyanceofall materials,scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete including the cost of cement as directed by the Engineer - in - charge |
| 2 | Providing and fixing in position openable type mosquito proof Door/ Window/Ventilator using 25.12 x 13.39 mm or higher size powder coated aluminium section for shutter, two intermediate 20.30 x 10.27 mm or higher size horizontal aluminium member for shutter and stainless steel net 316 grade, EPDM beading, Aluminium hinges , PVC latches, screws, nails, Applying matching colour silicon sealant for joints of wall and aluminium frame etc. including cost and conveyance of all materials, all labour, fixtures etc. complete |
| 3 | Dismantling and removing tiles set in cement mortar infloor including cleaning and stacking, serviceable materials and removing the debris within within CSL premises etc. complete. |
| 4 | Dismantling and removing doors,windows,ventilator including removal of shutters, hinges, holdfasts and all other fittings and stacking materials within CSL premises etc complete |
| 5 | Dismantling carefully existing washbasin, sink, EWC, flushing cisterns and urinal pans of all sizes including all labour for dismantling, all as directed by the Engineer-incharge. |
| 6 | Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mm size of approved make, quality and colour after clearing the floor properly by pasting with chemical adhesive Cerabond and equivalent and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in-charge (Basic rate of light shade tile = ₹565/m2 (excluding GST) |
| 7 | Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mm size of approved make, in all colours and shades, laid on 20mmthick bed of cement mortar 1:3 jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including the cost of cement (Basic rate of light shade tile = ₹565/m2 excluding GST) |
| 8 | Providing and laying ceramic anti-skid floor tiles not less than 300 x 300mm size of approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including cost of cement (Basic rate of tile = ₹435/m2 excluding GST) |
| 9 | Providing and fixing Ceramic wall tiles not less than 450 x 300mm of 1st quality, of approved make, in all colours and shades as approved by the Engineer – in –charge in dados over 12mm thick plastering with cement mortar 1:3 and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including cost of cement (Basic rate of tile = ₹468/m2 excluding GST) |
| 10 | Supplying and laying approved type Step Tiles (Restile/khajaria orequivalent )of size 900x300mmor nearest available size as approved by Engineer in Charge, set in CM 1:3 20mm thick and adding necessary cement grout for the proper binding ofthe tiles to lineand level,pointing thejoints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete, including cost of cement ( basic rate of tile is Rs. 1400/m2) |
| 11 | Painting on walls with two coat of interior emulsion paint of premium quality and colour over one coat putty and one coat cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. |
| 12 | With one coat of Putty |
| 13 | Without putty |
| 14 | Painting on wall surface with synthetic enamel paint of approved premium quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete. |
| 15 | Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have \\"stab\\" installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edged Calcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete |
| 16 | Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all materials all labour, other incidentals etc. complete. |
| 17 | Suppplying and fixing cascade type water closet with flush tank of light colour (Hindware/Paryware) approved by the Engineer-in-charge with all fittings, including cutting, opening and making good the damages, cost and conveyance of all materials for fixing, other incidentals, all labour for connecting outlet lines etc. complete |
| 18 | Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make. |
| 19 | Providing and fixing in position powder coated aluminium single leaf door without outer frames vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make. |
| 20 | Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwichpanel. Necessary woodensupports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 125mm aluminium handle 2 nos, with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. |
| 21 | Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentals etc. complete. |
| 22 | Providing and fixing in position aluminium partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thick particle board fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. |
| 23 | Providing and fixing in position half glazed partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thk.by particle board and 5mm thk plain glass fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. |
| 24 | Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials labour other sundries etc. complete all as directed by the Engineer- in- charge. |
| 25 | Supplying, cutting, threading, laying and jointing rigid PVC pipes including all specials such as tees, bends, elbows, reducers, plugs etc. through walls/ concrete, making good the wall/ concrete after fixing using CM 1:3, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete. |
| 26 | 25mm dia (10kg/cm2) |
| 27 | 32mm dia (10kg/cm2) |
| 28 | 63mm dia (6kg/cm2) |
| 29 | 110mm dia - (4kg/cm2) |
| 30 | Supplying and fixing following water supply and sanitary fittings in position of approved quality,all specials for connecting( Elbows/ Bend/Nipples etc.), including cost and conveyance of all materiaL S. all labour for fitting, all other incidental charges etc.complete all as directed by the engineerin-charge. |
| 31 | CP Two way tap |
| 32 | CP Health Faucets |
| 33 | CP Coat Hook |
| 34 | 600mm or nearest size CP towel rod |
| 35 | SS Gratings with cup of 125/150 mm size |
| 36 | PVC floor trap(multi trap) |
| 37 | 110 mm PVC vent cowl |
| 38 | Supplying and fixing urinal basin of 590mm x 400mm or nearest size (Indian make best quality, brand) with suitable spreader, waste coupling, of approved quality and brand including cost and conveyance of all materials, connecting the water lines (pipe and specials will be measured separately) etc. complete all as directed by the Engineer-in-charge. |
| 39 | Supplying and fixing approved quality and shade half pedastal wash hand basin (Hindware/Jaguar/Paryware/RAK/Cera) with necessary brackets, onecentralsingle lever quarter turnpillar cockwith foamflow, onecentral15mmPVC connection,1 no 15 mmCP stop cock , CP brass waste of standard patterns, 32mm PVC waste pipe, cutting and making good the walls, painting the brackets two coats including cost and conveyance of all materials labour, other incidentals etc. complete. Please Enable Macros to View BoQ information |
