|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1,500 mm |
| 2 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary).(Payment to be made on area cleared) |
| 3 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 4 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 5 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes a ) Pakur Variety i) In ground floor |
| 7 | Ordinary Cement concrete Mix (1:1.5:3) with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor as per relevant I.S. code. a ) Pakur Variety i) In ground floor |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel III. Other Manufacturers not specified i) In ground floor |
| 9 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). ( Excluding cost of chipping over concrete surface) (i) With 1:6 cement mortar c) 15 mm thick plaster i) In ground floor |
| 11 | (ii) With 1:4 cement mortar (c) 10 mm thick plasteri) In ground floor |
| 12 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 13 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 14 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 15 | White washing including cleaning and smoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction). pump room inside |
| 16 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
| 17 | Supply, erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface (For pumping system ) 6mm thick 200 mm NB x 6 mm thick |
| 18 | 150 mm NB |
| 19 | 80 mm NB |
| 20 | Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories. |
| 21 | Supply, installation, testing & commisssioning of CI Gate Valve as per IS:14846 (PN16) with matching complete with nuts & bolts. 200 mm NB |
| 22 | 150 mm NB |
| 23 | Supply, installation, testing & commisssioning of swinging type CI Non return Valve as per IS:5312(PN16 rating) with disc and SS hinges complete including matching flanges, nuts & bolts complete. 150 mm NB |
| 24 | Supply, installation of automatic 25 NB Air Release Valve |
| 25 | Supply & installation of GM oblique type single headed Hydrant valve with 80 mm inlet and 63 mm outlet GM instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts complete |
| 26 | Supply, installation of gunmetal branch pipe with 20 mm nozzle conforming to is 903 complete |
| 27 | Supply, installation of 63 mm dia rubberized reinforced rebber line hose pipe in 15 m length conforming to IS 636 Type II ISI marked with gunmetal male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire complete |
| 28 | Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with 10 kg/sq cm working pressure with GM self closing shut – off nozzle of 5 mm outlet fixed on wall with dash fasteners. |
| 29 | GST @ 18% of Estimated cost |
| 30 | Labour Wellfare Cess @1% of Estimated cost with GST Please Enable Macros to View BoQ information |
