Tender For Construction Of New Drug Store With The Provision Of A Walk In Cooler At Malda Medical College And Hospital - Part Iii (Sitc Of Walk In Cooler). (Job No. 38 / M / Ow Of 2025 - 26)., Manikchak-West Bengal
TDR : 54639076
Tender Notice
BOQ
7 Days Left
Manikchak
West Bengal
Tender For Construction Of New Drug Store With The Provision Of A Walk In Cooler At Malda Medical College And Hospital - Part Iii (Sitc Of Walk In Cooler). (Job No. 38 / M / Ow Of 2025 - 26).
Name of Work:- Construction of New Drug Store with the provision of a Walk in Cooler at Malda Medical College and Hospital - Part III (SITC of Walk in Cooler). (Job No. 38 / M / OW of 2025 - 26).
Sl. No.
Item Description
1
Supply-Delivery, Installation, Testing & Commissioning of Walk-in-Cooler for Drug Store with the following specifications - [Make: Bluestar/ Carrier/ Daikin/ Hitachi]
2
General Specifications:Application: Storage of medicine and vaccineExternal Dimensions (L x W x H): 13.5 ft x 13.5 ft x 8.5 ftInternal Dimensions (L x W x H): 13 ft x 13 ft x 8 ftRequired Room Temperature: +2°C to +8°CAmbient Temperature: Up to +45°COperation Time: 24 hoursProduct Inflow Rate & Temp: Normal flow, at +2°C to +8°C
3
Insulation and Panels:Wall/Ceiling/Floor Insulation: 60mm thick PUF (Polyurethane Foam)Panel Lamination: Inside – SS 304; Outside – PPGIInsulation Type: CFC-Free, Cyclopentane-blown Green PUF PanelsDensity: 40–42 kg/m³Thermal Conductivity: < 0.02 kcal/m²·hr·°CCompressive Strength: ≥ 1.3 kg/cm²Closed Cell Content: ≥ 95%Water Absorption: ≤ 2%Vapor Permeability: < 2%Fire Resistance: Self-extinguishing in absence of flame
4
Flooring:Construction: 60mm PUF + 6mm Marine Ply + 1.2mm Aluminum Checkered PlateDoor:Clear Opening Size: 34” x 78”, 60mm PUF InsulatedFeatures:View port: 12” x 12” with heatingHeater for defrostHeavy-duty lift hingesAirtight gaskets, Posi-seal closerSafety release from insideSS 304 inside & PPGI outside lamination
5
Refrigeration System:Type: Air CooledRefrigerant: R-404A (CFC-Free) (precharged)Cooling Capacity: 40,000 BTUH (2 units of 20,000 BTUH each; 1 working + 1 standby)Defrost System (IDU): Air defrostDefrost System (Door): Electric heaterCompressor Type: Scroll typeIDU Casing: SS-304; Fan: 85W x 4 nos, Total CFM: 3200CDU Casing: Powder-coated GI; Fan: 187W x 1 noHeat Exchanger: Copper coils with aluminum finsCopper Pipe (Liquid/Gas): Supply & Fixing each up to 25mtr length or as required
6
Electricals:Power Supply: 400V (+/-10%)/ 3Ph / 50HzLighting: 18W LED Moisture-Proof (to maintain proper illumination level)Power Cable (Copper) : Supply & Fixing 5 core (3P+N+E) 4 sq. mm. upto 25mtr or as required.
7
Monitoring and Controls:Temperature Controller:Microprocessor-based with HP/LP & High/Low Temp Indicators HACCP log, print feature, Modbus for remote monitoring IoT Monitoring Device:GSM/LTE ConnectivityBattery backup ≥ 4 hoursReal-time monitoring of temp, door status, and power IP64-rated enclosureTemperature Data Logger:USB type with ≥ 16,000 memory pointsControl Cable (Copper): Supply & Fixing 4/6/8/or as per OEM standard upto 25 mtr or as required
8
Safety & Accessories:Alarm: Dual temperature alarm for high/low notificationsSafety Door Latch: Swing type with internal emergency releaseCold Room Racking:Material: SS 304Size: 900mm (W) x 450mm (D) x 1820mm (H)Structure: 5 shelves, 4 compartmentsRubber socket below legs for protection.
9
[All parts should conform to the relevant IS & IEC standards][Warranty: 24 months Comprehensive Warranty on complete product, including all spare parts and additional 36 months warranty on the compressors and PCBs]
10
TERMS & CONDITIONS
11
(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST.(ii) The Agency must procure the materials for the Manufacturer / OEM or from their authorized sales channel, so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.iii) Documents that authenticate such procurement from the manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill.iv) If any refurbished material is supplied and installed, penal action will be taken as per existing rules. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
