|
| 1 | Providing and laying glazed vitrified floor tiles(GVT) with approved brand and size 1200x600mm or nearest available size (thickness to be specified by manufacturerer with water absorption lessthan 0.08% and cofirming to IS 15622 and fixing floor tiles with cement based high polymer modified quick set tile adhessive(Water based)confirming to IS 15477 in average 3mm thickness and grouting the joints of flooring tiles having joint of 3mm width using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardner and 0.20kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer in charge. |
| 2 | Providing, laying and grouting Glazed vitrified tiles (GVT) of minimum 1200x600 mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer in all colours & shades in skirting, risers of steps and dados etc. fix with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 mm , using epoxy grout mix of 0.70 kg of organic coated filler of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete as per direction of Engineer-in-charge. (Purchase price of tiles at site to be in the range of Rs. 70/Sqft to Rs. 90/Sqft.) |
| 3 | Providing , laying and grouting Anti-skid vitrified tifes of minimum 1200x600 mm sizes (thickness to be specifled by manufacturer), with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer in all colours & shades in flooring, laid with cement based high pofymer modified quick set tife adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 nun , using epoxy grout mix of 0.70 kg of organic coated fiffer of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete ls per direction of Engineer-in-charge. |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Applying one priming coats with primer of approved brand and manufacture,With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 6 | Wall painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 7 | Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well. |
| 8 | Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitions etc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyester powder coated aluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only) |
| 9 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With 5mm thick annealed glass ST450 BLUE GREEN (COOL-LITE series of saint gobain india or eqvt with VLT > 40%, & U value < 5.7W/m2/K). |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 5.5 mm thickness |
| 11 | Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications). |
| 12 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. |
| 14 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 16 | Providing and fixingC.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore : 15mm nominal bore |
| 17 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia. |
| 19 | Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 as the case may be, including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferrule, pipe supports, etc., hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 - For external lines-25 mm or nearest OD |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore. |
| 21 | Supplying and fixing P.V.C. pipes conforming to IS 4985 class II- 4kg/sq.cm pressure for waste water lines with all required specials such as plain bends, single junctions, elbows, unions, etc. including cutting masonry or concrete floors, etc. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with clamps screwed in to masonry wherever required etc. complete-63mm or nearest outer dia. |
| 22 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 23 | Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete |
| 24 | Supply and fixing stain less steel hanger unit having min 3 hooks |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Providing and fixing at all levels Health faucet with wall hook and 1.5m SS braided rubber hose pipe of product code of Hindware (product: F160023) or equivalent model from Cera, Parryware and angle stop cock of grohe (code : 2201600M flow rate≤ 5 litres per minute) including fitting, cutting and making good the walls etc. complete. |
| 27 | Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430x380x230mm or nearest size (Indian make best quality ) with 1 no. 15mm pvc heavy type connection with CP learning nut and 1 no. 15mm CP regulating valve(Jauger or equivalent) of superior make , CP spreader with flush pipe , fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete |
| 28 | Supplying Ferro cement septic tank of 30 users capacity having wall thickness 60mm or nearest including installing in position with all necessary pipes and fittings and making connection with the waste line inclusive of cost of all material and labour complete. |
| 29 | Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD. |
| 30 | Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete. |
| 31 | Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site |
| 32 | Providing and fixing false ceiling at all height including providing and fixing of frame work all as per detailed specification noted in Special Conditions of work Clause No. 5 and as per the direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge moisture resistant gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) |
| 33 | Providing and fixing wall panelling with 8mm BWR grade plywood pasted with 1mm laminate(Merino, Green or equivalent approved brand) and framed with 18mm BWR grade plywood as per design. All visible faces to be edge banded withapproved colour lipping. All laminates to be hot pressed on BWR grade ply including cost of all materials and labour. |
| 34 | Supply and fix Entrance glass Door: 12 mm thick Toughned glass frameless door of size (1.5mx2.1m) floor spring type with patch fittings, including all ironmongeries to be Dormacaba. Doorset, Enox or equivalent approved. Glass to be Saint Gobain or equivalent approved. |
| 35 | Providing shelves of size 1.00 x 1.95 & 0.30 m depth with 18mm BWR ply laminated with 1mm laminate of approved veneer and with 6mm ply backing laminated on one side and with no shutters. 4 Nos. of 6mm glass shelves shall be provided.Visible faces have to be edge banded with approved colour lipping subject to client approval.Laminates to be hot pressed on BWR grade ply and the rate shall be inclusive of all materials, labour etc. |
| 36 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. up to 5Km distance. Please Enable Macros to View BoQ information |
