|
| 1 | Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(Not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like Not exceeding 10Sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils . |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:5:10 (1 cement 5 coarse sand 10 graded stone agg. 40 mm Nominal size) crushed |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm Nominal size) crushed |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm Nominal size) |
| 5 | Brick work with common burnt clay F.P.S (Non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) |
| 6 | Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm Nominal size of crushed stone aggregates. |
| 7 | Reinforcement of R.C.C work in slab, beams, lintel band, sunshades including cutting, bending,placing in position and binding and complete. |
| 8 | Centring and Shuttering including strutting, propping etc and removal of foRmt work for foundation , footings , basis of columns etc. for mass concrete. |
| 9 | Suspended floors, roofs , landings , balconies and access platfoRmt. |
| 10 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Edges of Slabs and Break in floors and walls under 20 cm wide |
| 12 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc. |
| 14 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 15 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 16 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) |
| 17 | 15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), . |
| 18 | 6mm thick plaster in 1:3, Mix. Ceiling |
| 19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick Second class Kail wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm thick Second kail wood |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 22 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm |
| 23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers Not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confoRmting to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm ) |
| 25 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work |
| 26 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 Kg/10Sqm |
| 27 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 28 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 29 | Making plinth protection 50mm thick with cement conc. (1:3:6), 20mm Nominal size of stone aggregates over 75mm bed of dry brick ballast, 40mm Nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth andcuring complete. |
| 30 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confoRmting to IS : 13592 Type A including jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion 110mm dia |
| 31 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confoRmting to IS : 13592 Type A including jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion Bend 110mm |
| 32 | Engagement of painter for writing name of school,logo and making India map and charts on wall. |
| 33 | Making Blackboard (1 No.)one in each class room in cm (1:4) with side patti complete in all respect as per drawing (paid as L S). |
| 34 | Providing and fixing wiring for light point/ fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with simple switches, Fan regulator, plates, G.I box including supply of wiring, holders, Fan box, including LED bulb 9 watt, PVC conduit with SPN of 32 amp and MCB (10, 16 amp as per load) &4.0 sq mm wire from main board to room board, of make Anchoor / Havells all job complete. |
| 35 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm |
| 36 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm |
| 37 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : tower bolts 150x10mm |
| 38 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 39 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 40 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper |
| 41 | Carriage of material by M.T including loading unloading and stacking at site complete. |
| 42 | Sand lead up to 10 kms. |
| 43 | Stone aggregate below 40 mm lead up to 10 kms. |
| 44 | Bricks lead up to 15kms Please Enable Macros to View BoQ information |
