|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers ofnot exceeding 20cm in depth, consolidating each deposited layer by by rammering and watering lead 50mtr and lift 1.5mtr |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 5 | Providing and laying in position Reinforced cement concrete in foundations, footings etc. all work upto plinth of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position Reinforced cement concrete in walls, return walls, pillasters, columns posts, buttresses all work upto floor V level of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position Reinforced cement concrete in Suspended floors, roofs, stair cases, lintels, chajjas, balconies etc. all work upto floor V level of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings bases of column |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, pillars, piers, abutments, posts etc |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies etc |
| 11 | Steel Reinforcement for RCC work including cutting, bending, binding and placing in position all complete (TMT bars of Fe500 Grade) |
| 12 | Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) in foundation and plinth |
| 13 | Extra for brick work with common burnt clay bricks in superstructure above plinth upto floor V level. |
| 14 | 12mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 15 | Finishing walls with water proofing cement paint of required shade on new work (two or more coats applied @ 3.84kg/10Sqm) |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600mmx600mm) |
| 17 | Providing and fixing Ist class ceramic glazed wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1cement :3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 18 | Providing and fixing pressed Steel door frames conforming to IS4351, manufactured from commercial mild steel |
| 19 | Providing and fixing 30mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). (Second class Kail wood) |
| 20 | Providing and fixing 30mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 21 | Providing and fixing 30mm thick fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. (Second class Kail wood) |
| 22 | Providing/fixing of following Aluminium fittings (150mm Tower bolt) |
| 23 | 100mm Tower bolt |
| 24 | 250mmx16 AI drop |
| 25 | 125mm Handle |
| 26 | 100mm Handle |
| 27 | Structural steel work in built up sections made of angles, channels, beams, pipes, flats etc. including, cutting, welding and placing in position along with a priming coat all complete |
| 28 | Providing/fixing of Corrugated G.S. roofing sheets including vertical/curved surfaces fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers filled with white lead i/c coat of approved steel primer and two coats of approved paint on overlappingof sheets complete (0.50mm thick sheets) |
| 29 | Providing/fixing of 60CM Plain G.S. Ridges or hips fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers filled with white lead i/c coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (0.50mm thick sheets) |
| 30 | Providing/fixing of Eves boarding of size 300mmx2mm thick MS Sheet including Priming coat painting and all complete. |
| 31 | Providing/fixing 20mm thick wooden planks ceiling (frame work for the base to be paid seperately) with M.S screws |
| 32 | Providing woodwork in frames of false ceiling / ceiling joists partitions etc. (first class Budloo wood) including fixing by nails, screws all complete. |
| 33 | Providing and fixing collapsable steel door shutters with vertical channels 20x10x2mm and brassed with flat iron digonals 20x5mm sizewith top and bottom rail with T-iron 40x40x6mm with 40mm dia steel pullys complete with nuts and bolts locking arrangments, stoppers and handles along with a priming coat all complete |
| 34 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110mm dia |
| 35 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 36 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 37 | Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32mm dia |
| 39 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 40 | Providing and fixing in position 25 mm diameter mosquito proofcoupling of approved municipal design. |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 19.3.1 Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes |
| 43 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length. |
| 44 | Providing and fixing PVC pipes for drainage of waste water including fittings all complete |
| 45 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 46 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 48 | Providing and fixing of 1000ltrs capacity water tank as per the directions of the Engineer-In-charge with all fittings complete |
| 49 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. |
| 50 | Applying Priming coat on new wood work and wood based surfaces Doors, windows, ceiling etc. |
| 51 | Painting with Synthetic enemal paint of approved brand and manufacture two or more coats. |
| 52 | Wall Painting with premium acrylic enemal paint of interior grade of approved brand and manufacture two or more coats |
| 53 | Carriage of Steel/Cement from source to site by mechanical transport or animal transport or by head load |
| 54 | Carriage of Sand from source to site by mechanical transport or animal transport or by head load |
| 55 | Carriage of Stone Aggregates from source to site by mechanical transport or animal transport or by head load |
| 56 | Carriage of Bricks from source to site by mechanical transport or animal transport or by head load |
| 57 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 58 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 59 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 60 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 1x1.5Sqmm |
| 61 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required. 25mm |
| 62 | Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required. |
| 63 | Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos. 3-Pin 5/6A modular socket outlet and 2nos. 5/6A modular switch including, connection, painting etc as required (For light plugs to be used in non residential buildings) |
| 64 | Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25Amp modular socket outlet and 25 amps modular MCB, \\"C\\" curve including, connection, painting etc as required. |
| 65 | 5/6 Amp Switch |
| 66 | 3-Pin 5/6 Amp Socket outlet |
| 67 | 15/16 A switch |
| 68 | 6-Pin 15/16 A Socket outlet |
| 69 | Bell Push |
| 70 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 71 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plates as required |
| 72 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door |
| 73 | Supplying and fixing of single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way Double door |
| 74 | Supplying and fixing 5Amps to 32amps rating 240Volts \\"C\\" series miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single pole) |
| 75 | Supplying and fixing following Electrical items complete with connections as required.SPN 63Amps |
| 76 | SPN 40Amps |
| 77 | Fan Box |
| 78 | MS Deep Box |
| 79 | Phenolic laminated round sheet 4\\" dia average |
| 80 | S/F of 16mm twin core aluminium cable |
| 81 | S/F of 10mm twin core aluminium cable |
| 82 | Angle Batten Holder |
| 83 | Supply, installation, testing & commissioning of 20Watt 4-feet long batten type LED tube lights |
| 84 | Supplying and fixing of Exhaust Fan 300mm sweep suitable for opening on 240/230VoltsAC, 50Hz supply |
| 85 | Supplying and fixing of Cieling Fan 1200mm sweep suitable for opening on 240/230VoltsAC, 50Hz supply |
| 86 | Supplying and fixing of LED street light 70 Watt along with wiring with 2x1.5=1x1.5Sqmm FRLS PVC insulated copper conductor single core cable etc. and bracket of suitable size as required |
| 87 | CIB( citizen information board) size 2'6''x3'6''x0'9''( complete job) Please Enable Macros to View BoQ information |
