|
| 1 | Carriage of Building Rubbish Stone Metal grit ballast etc.with a lead of 10 Kms.(G-4.1/4.2) |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 4 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 5 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) |
| 6 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. |
| 7 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-(i)Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.(ii)Applying Epoxy primer on the exposed steel bars.(iii)Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush.(iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.(v)Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.(iv)Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 8 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats)(B-12/12.22.2) |
| 9 | Painting with synthetice enamel paint of approved brand and manufacture to give an even shade : |
| 10 | (a) Two or more coats on new work.(B-12/12.46.1) |
| 11 | (b) One or more coats on old work.(B-12/12.46.2) |
| 12 | Providing and fixing fully panelled/partly panelled/ double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :Shesham wood grade I |
| 13 | Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 125 x 100mm(B-15/15.25.2) |
| 14 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 15 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (i)after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(ii)laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm .(iii)Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around(iv)fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured |
| 16 | Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.Red sand stone (Karauli stone) |
| 17 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 18 | (-do-) 20mm nominal bore. |
| 19 | (b) Gun-metal 25mm nominal bore. (S-2/2.15.3) |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 21 | 20mm nominal size |
| 22 | 25 mm nominal size |
| 23 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 24 | (a) 110 mm dia(S-3/3.16.3) |
| 25 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 26 | -do- size 600 x 450mm depth upto 0.5 M Cement cover with frame. |
| 27 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.(S-2/2.26.3) |
| 28 | Hoisting Charges for each floor :For items 2.26.1 to 2.26.4 |
| 29 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Mini stall size 455x385x350mm. |
| 30 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 31 | P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall. |
| 32 | P & F Soap Dish or Tray of approved quality/makeC.P. brass heavy and superior quality. |
| 33 | P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of approved make as per direction of Enginner-in-Charge |
| 34 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in-Charge |
| 35 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend and superior internal fittings as per IS : 7231 . |
| 36 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :(-do-) wt.Not less than 1000 gm 40mm.: |
| 37 | Providing & fixing C.P.flange for 15mm dia taps. |
| 38 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 510 mm x 400 mm |
| 39 | P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm |
| 40 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 41 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 42 | P & F 15 mm. Dia Connection Pipe of approved quality/make :(-do-) 450mm. |
| 43 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : (-do-) wt.Not less than 800 gm, 32mm. |
| 44 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 45 | Swan neck pillar cock 15 mm nominal size |
| 46 | Bib Cock with long thread 15 mm nominal size |
| 47 | Long body Bib Cock 15 mm nominal size |
| 48 | P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm |
| 49 | P & F Grating of approved quality/make:Synthetic Material(PTMT) of approved quality/make size 125mm dia. |
| 50 | Labour charges for making connection of sewer line through main hole. |
| 51 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M |
| 52 | Supply of Labour as per requirment with required Tools & plants |
| 53 | (a) Beldar(Code no.114) |
| 54 | (b) Fitter (grade 1)(Code no.116) |
| 55 | (c) Carpenter 1st class(Code no.111) |
| 56 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 57 | P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 58 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 59 | Coupler (socket) 110mm dia |
| 60 | Reducer 110 X 75 mm 110mm dia |
| 61 | Plain Tee 110mm dia |
| 62 | Door Tee 110mm dia |
| 63 | Bend 45 110mm dia |
| 64 | Bend 87 .5 110mm dia |
| 65 | Door Bend (Top Side) 110mm dia |
| 66 | Vent Cowel 110mm dia |
| 67 | Socket plug 110mm dia |
| 68 | Door Cap 110mm dia |
| 69 | Pipe Clip 110mm dia |
| 70 | Plain floor trap 110mm dia |
| 71 | Gully trap 110mm dia |
| 72 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 73 | Pillar Cock 15 mm nominal size |
| 74 | Swan neck pillar cock 15 mm nominal size |
| 75 | Bib Cock with long thread 15 mm nominal size |
| 76 | Long body Bib Cock 15 mm nominal size |
| 77 | Removing & refixing of 30-35mm thick sand stone in Cement Sand mortar 1:3 and pointing of flooring with Cement Sand mortar 1:2 including pigment to matching the shade as Per Direction of Engineer Incharge. Please Enable Macros to View BoQ information |
