|
| 1 | Clearing & grubbing shrub, jungles including uprooting stumps of trees and trees below 1.0 m. girth and thick bushes including bamboo clamps based on pre-measurement disposing the debris away from the work site with all leads,lifts and delifts with cost of all labour,T & P, hiring and running charges of all machineries, cess complete as per direction of Engineer-in-Charge. |
| 2 | Earthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth with cost of all labour T&P etc complete. |
| 3 | Supplying and filling the foundation & plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150cm thick watering & ramming including cost, conveyance, royalty and taxes of all materials, cost of all labours, T & P etc as required for the work complete as per direction of the Engineer-in-Charge. |
| 4 | Providing & laying plain cement concrete 1:3:6 (1 cement: 3 sand: 6 stone aggregate 20mm nominal size) as levelling course in foundation & plinth etc including tampering, curring, shuttering etc. complete all depth and height including cost, conveyance, royalty and taxes of all materials, cost of all labour, T & P etc as required for the work complete and as direction of Engineer-in-Charge. |
| 5 | Providing and laying Cement Concrete M20 using 20mm size down graded Black H.G. crusher brocken chips for R.C.C. works including cost, carraige, rayality of all materials and machinaries and labours with all leads, lifts etc complete as per approved drawings & specification & direction of the Engineer-in-charge. |
| 6 | Ground Floor |
| 7 | 1st Floor |
| 8 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in R.C.C. footing, column, slab, stair case, landing, lintel including cost, conveyance, royalty and taxes of all materials, cost of all labour etc as required for the work complete and as direction of Engineer-in-Charge. |
| 9 | Upto plinth level |
| 10 | Roof beams,column |
| 11 | Ground Floor |
| 12 | 1st Floor |
| 13 | Lintel |
| 14 | Ground Floor |
| 15 | 1st Floor |
| 16 | Roof slab & Chajja |
| 17 | Ground Floor |
| 18 | 1st Floor |
| 19 | Cutting, straightening colled or bent up M.S. rods, HYSD steel or Tor steel or grade Fe-415 confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of m.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). |
| 20 | Ground Floor |
| 21 | 1st Floor |
| 22 | Fly Ash brick masonary in Sub structure in cement mortar (1:6) in using Fly ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2 including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. |
| 23 | Fly Ash brick masonary in Super structure in cement mortar (1:6) in using Fly ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2 including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. |
| 24 | Ground Floor |
| 25 | 1st Floor |
| 26 | 6mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T & P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 27 | Ground Floor |
| 28 | 1st Floor |
| 29 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 30 | Ground Floor |
| 31 | 1st Floor |
| 32 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 33 | Ground Floor |
| 34 | 1st Floor |
| 35 | 20mm (3/4\\") thick cement plaster (1:2:2) (Grading Plaster) using 1 part cement 2 part sand and 2 part 6mm c.b.h.g. chips |
| 36 | Providing and laying vitrified tiles 600x600 mm. 1st quality laid on 25mm thick cement mortar 1:6 (1cement:6coarse sand) including pointing the joints with white cement and matching pigments, etc. complete design/drawings including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labourrequired for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 37 | Providing and laying Anti-skid ceramic floor tiles 300x300 mm approved make conforming to IS:13755 1st quality laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete design/drawings including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labourrequired for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 38 | Ground Floor |
| 39 | 1st Floor |
| 40 | Supplying, fitting & fixing of 30cm x 30cm/40cm x 40cm special plain/printed series Ceramic tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 41 | Ground Floor |
| 42 | 1st Floor |
| 43 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, taxes, labour, T. & P. etc complete. |
| 44 | Ground Floor |
| 45 | 1st Floor |
| 46 | Providing and applying to outside walls with two or more coats of -Fungal weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, and direction of Engineer-in-Charge at all elevations including all material labour complete. |
| 47 | Ground Floor |
| 48 | 1st Floor |
| 49 | One coat to wall with any approved primer of approved shade including cost, carriage, taxes of paints, brush, putty, scaffoldind charges, labour charges, cess etc. complete as per direction of Engineer-in-Charge. |
| 50 | Ground Floor |
| 51 | 1st Floor |
| 52 | Painting two coats with plastic emlusion paint over a coat of water as per the direction of Engineer-in-Charge at all floors and all heights including all material & labour complete. |
| 53 | Ground Floor |
| 54 | 1st Floor |
| 55 | Providing & painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the direction of Engineer-in-Charge at all floors and all heights including all material & labour complete. |
| 56 | Ground Floor |
| 57 | 1st Floor |
| 58 | Providing, fitting and fixing of aluminium door with aluminium door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and with 12mm thick glass fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour and T & P hire charges of drilling mechine, labour charges etc. as per the direction of Engineer- In- Charge. |
| 59 | Ground Floor |
| 60 | 1st Floor |
| 61 | Supplying,fittting,fixing of window(Sliding Type) made of Aluminium section 9778 as window frame,section No 4095,4096 and 9777,3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bidding including locking arrangement, including all fitting ,including cost of materials, all taxes/labour,T&P etc complete as per direction of Engineer -in- Charge |
| 62 | Ground Floor |
| 63 | 1st Floor |
| 64 | Supplying,fitting and fixing general iron grill,door and window etc. complete with clamps including making good to the wall,ceiling and floor all complete as per specification (Local Market Rate) |
| 65 | Ground Floor |
| 66 | 1st Floor |
| 67 | Providing & Fixing Flush Door with all accessories and including fitting for Toilet |
| 68 | Ground Floor |
| 69 | 1st Floor |
| 70 | Supply,fitting & Fixing 100mm dia Rain Water drain pipe |
| 71 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge |
| 72 | Supplying, fitting & fixing of stainless steel of 304 grade in hand ralling using 50 mm dia of 2 m thick circular pipe with balustrade of size 32 mm x 32 mm x 2 mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 73 | Diluting & injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25Litres per linear metre including drilling and plugging holes etc with chlorpyriphos/Lindane E.C 20% with 1% concentration with labour, T&P etc complete in all respects as per direction of the engineer-in-charge. |
| 74 | Ground Floor |
| 75 | 1st Floor |
| 76 | (B) Electrical Works |
| 77 | Recessed wiring to light/ fan /exhust fan/call bell point with 1.5sqmm FR PVC insulated S/C M.C. copper conductor in 20mm dia PVC non-metalic pipe with s/f of 6Amp 250 v piano type switch ISI marked along with 1.5 sqmm s/c copper running earth wire including all accesories and connection. (make of polycab/RR /Finolex /V.Guard/anchor) |
| 78 | (I) Group-A |
| 79 | (II) Group-B |
| 80 | (III) Group-C |
| 81 | suplly and fixing of modular 6 amp switch on exsting board (make of modular switch panasonic /legrand/ anchor or eq) |
| 82 | suplly and fixing of modular metal box on surface or in recess with suitable size of modular cover in front including providing and fixing of 6 amp modular socket outlet and 6 amp modular switches connection (make of modular switch panasonic /legrand/ anchor or eq |
| 83 | S/F of 1.5/2.5 inverter wiring |
| 84 | Recessed wiring to submain in the following sq mm FR pvc insulated single core multistrand copper conductor for isi marked conforming to IS-694/1990 in the following dianon metallic heavy duty flexible conduct 1.6 mm thick along with the following sq mm pvc insulated single core multistrand copper conductor as earth wire as required(make of wire finolex/l&t/anchor /polycab) |
| 85 | i) 2 × 1.5 sqmm + 1 × 1.5 sqmm. |
| 86 | ii) 2 X 2.5 sqmm + 1 X 1.5sqmm |
| 87 | iii) 2 X 4 sqmm + 1 X 2.5 sqmm |
| 88 | iv) 4 X 10 sqmm + 2 X 4 sqmm |
| 89 | Supply and fixing of modular metal box on surface or in recess with suitable size of modular cover in front including providing and fixing of 16 amp modular socket outlet and 16 amp modular switches connection (make of modular switch panasonic /legrand/ anchor or eq |
| 90 | S/F of 4 way double doorTPN DB with (1 x 63 amp four pole + 3 x 32 amp dp, sp mcb 7 ) MCB ( schneider/ hager/ C&S/ l&t/legrand) |
| 91 | S/F of 18 watt surface/Celling light make (crompton,havells,philips,panasonic) |
| 92 | S/F I T C OF celling fan 48\\" (make havells/ Crompton / usha/ bajaj ) |
| 93 | S/F of 2 step electronic step type modualr fan regulater.( make- schineider/panasonic europa /legrand) |
| 94 | S/F of angle holder make(anchor,cona,havels) |
| 95 | S/F of 9 watt led bulb,make (bajaj,philips,crompton,havels) |
| 96 | S/F of 400 mm wall fan make(bajaj,usha,crompton) |
| 97 | S/F of 1.5 ton 5 star inverter model split AC machine (voltas, blue star,DAIKEN,LG) |
| 98 | S/F of 4 kva Stabilizer make ( microtech,v guard ,luminous) |
| 99 | Installation of ac machine |
| 100 | S/F of 15 amp top (havells,anchor,legrand) |
| 101 | S/F of Out door M.S stand for A.C machine. |
| 102 | S/F of 300 mm exhaust fan make(bajaj,usha,crompton) |
| 103 | Supply and installation, testing & commissioning of pannel board with following arrangement ( legrand,scheineder,hager,L&T) incoming :-Adustable thermal fixed magnetic mccb) 160 amp 4 pole mccb (25 ka) =1 no .handle,200 amp copper bus.160 change over .SPD out going 63 amp 4 pole mcb , 1 nos,63 dp mcb 2 nos instrument:- indicating lamp (RYB) 1 set internal wiring,volt meter,Ameter, with handle. |
| 104 | S/F of 3.1/2 core x 50 sq mm XLPE aluminium armoured cable make(havells,polycab,rr) . |
| 105 | cable tranch clamping on surface |
| 106 | S/F of 1 × 20 watt T5 led batten tube light (panasonic/ philips /jaguar/ Crompton) |
| 107 | S/F of 150 watt led floodt light (panasonic,crompton, philips,jaguar) |
| 108 | S/F of 90 watt led street light (panasonic,crompton, philips,jaguar) |
| 109 | S/F of 2.5 kva inverter with 2 nos of 150 ah tall tubular battery (liv guard,v guard,livefast.luminous) |
| 110 | Earthing with G.I earthpipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 111 | S/F of copper wire for earthing |
| 112 | (C ) PH Works |
| 113 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 114 | 20mm dia PVC ASTM pipe (sch-80) |
| 115 | 25mm dia PVC ASTM pipe (sch-80) |
| 116 | 32mm dia PVC ASTM pipe (sch-80) |
| 117 | 40mm dia PVC ASTM pipe (sch-80) |
| 118 | 50mm dia PVC ASTM pipe (sch-80) |
| 119 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 120 | 15mm dia CP angle stop cock (FLR-ACR-5053N Jaquar make) |
| 121 | 15mm dia CP two in one bib cock (FLR-CHR-5041N Jaquar make) |
| 122 | 15mm dia CP bib cock (Jaquar Make) |
| 123 | 25mm dia brass full way valve (Shakti make) |
| 124 | 32mm dia brass full way valve (Shakti make) |
| 125 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 126 | 15mm CP Extension piece |
| 127 | 125mm CP grating |
| 128 | 15mm size C.P. flange |
| 129 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 130 | 2000 liters capacity PVC water storage tank |
| 131 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 132 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 133 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 134 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 135 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 136 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 137 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 138 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 139 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 140 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 141 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 142 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 143 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 144 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 145 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 146 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 147 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 148 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 149 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 150 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 151 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 152 | European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 153 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 154 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 155 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 156 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 157 | 25mmx600mm long CP towel rail |
| 158 | Towel ring |
| 159 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 160 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 161 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 162 | 600mmx450mm size B.E mirror (swivelled type) |
| 163 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 164 | CP soap holder |
| 165 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 166 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 167 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge |
| 168 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 169 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 170 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 171 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 172 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 173 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) |
| 174 | Kajaria/Somany/Johnson tile 30cmx30cm |
| 175 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 176 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 177 | Kajaria/Somany/Johnson tile 45cmx30cm |
| 178 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 179 | External S/D Portion |
| 180 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 181 | 100mm dia P.V.C. pipe |
| 182 | 150mm dia P.V.C. pipe |
| 183 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 184 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 185 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 186 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 40 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge |
| 187 | Aqua guard pure Chill 40 PSS UV |
| 188 | Supplying all materials, labour and T&P for fixing bowl pattern urinal including connecting the urinal of 430x260x350mm orv 340x410x265mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specifications. |
| 189 | 2 no of 20 Users septic tank of size 2.30m x 1.10m x 2.10m Internal size |
| 190 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.3 x 3.40 x 2.30 x 1.50 = |
| 191 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 3 x 3.40 x 2.30 x 0.60 = |
| 192 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 193 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 194 | 3 x 3.40 x 2.30x 0.15 = |
| 195 | Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete. |
| 196 | Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. 3 x 2.80 x 1.60 x 0.10 = |
| 197 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. 0.448cum x 2.50x 35.32 = 39.55 kg say rs |
| 198 | Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor. |
| 199 | RCC floor, roof slab chhaja up to 4.430 m height |
| 200 | Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. |
| 201 | Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. |
| 202 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plastering |
| 203 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 204 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 205 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1 x 3.40 x 2.30 x 0.15 = |
| 206 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 207 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 208 | Drilling of 200mm dia bore |
| 209 | 00 mtr to 30mtr |
| 210 | 30 mtr to 45mtr |
| 211 | Drilling of 150mm dia bore |
| 212 | 45 mtr to 213 |
| 213 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 214 | 2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm |
| 215 | DOL Control panel |
| 216 | 40mm dia steel short piece |
| 217 | Well cap |
| 218 | 50mm size CI bracket |
| 219 | 2.50sqmm flat cable |
| 220 | Steel rope with cover |
| 221 | Labour charges for lowering including transportation |
| 222 | The item rates indicated aove work inclusive of cost of all labour, materials,conveyence,taxes and royality(with EMF,DMF and additional charges) of materials,labour cess,here and running charges of all machineries and equipments and other incidental charges so as to complete the item in all respect as per specification and direction of Engineer-In-Charge.Accordingly the bidder has to quote the rates.The rate are exclusive of GST as applicable. Please Enable Macros to View BoQ information |
