|
| 1 | Earth work excavation in Hard soil using one cum Bucket Hydraluc Excavator with all leads and lifts and transpotation of ecavated matiral by mechcanical means. and direction of Engg -in- charge |
| 2 | Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the specification & direction of E-I-C |
| 3 | PCC in prop. (1:4:8) in foundation and bed using 4 cm size h.g C.B metal of approved quality and approved quarry including hoisting, lowering, laying concrete and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & p such as hire charges of concrete mixer, concrete vibrator required for the work etc complete as per the specification and direction of EI-C |
| 4 | RCC M-25 using 12 mm & 20 mm size c.b.h.g chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering & curing, finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyance, royalties, taxes of all materials and cost of all labour T & P, such as concrete mixer, concrete vibrator etc all complete as per the specification and direction of Engineer-in-charge. |
| 5 | First class Fly Ash brick work in cement mortar (1:4) in Foundation & Plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge.. |
| 6 | 12mm thick C.P. in C.M.(1:4) over Brick Masonery works including closed deep chipping & slurry treatment including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 7 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. |
| 8 | Providing & laying at or near ground level factory made Kerb stone of M-25 Grade Cement concrete in position to the required line,level,curvature,jointed with cement mortar (1:3),including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required etc complete as per direction EIC. |
| 9 | supplying and fixing of RCC Bollard of 0.15m dia and 1.2m length made of RCC (1:1.5:3) with fixing of 0.45m in ground by digging 0.45x0.45x0.6m earth work and grouting with CC(1:2:4) and three coats enamel painting etc complete. |
| 10 | Painting two coats with weather seal coat over a coat of water bound wall primer including cost of all materials,labour,T & P sundries etc complete as per direction of Engineer- in-charge. Please Enable Macros to View BoQ information |
