|
| 1 | RMO of IEI, Fire extinguisher, CCTV System, Intercom/EPBAX system, Invertor Battery Set, Compound Light, servicing of water cooler, RO System, desert cooler, fans etc. at office building Subhash Nagar per inventory, terms and conditions attached by deploying the following staff:-i) Wireman Gr-I – 1 No. per day in general shift & as and when required.ii) Khallasi - 1 No. per day in general shift & as and when required. |
| 2 | Supplying & replacement of following accessories/items i/c connection, installation, commissioning, testing etc. in all respect complete as required.2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor wire. |
| 3 | 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor wire. |
| 4 | 4 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor wire. |
| 5 | S.P. 5/6 amps, one way switch, piano type ISI marked. |
| 6 | S.P. 15/16 amps, one way switch, piano type ISI marked. |
| 7 | 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked. |
| 8 | S.P. 5/6 amps, one way modular switch, ISI marked. |
| 9 | S.P. 15/16 amps, one way modular switch, ISI marked. |
| 10 | 6 pin 15/16 amps modular socket outlet, ISI marked. |
| 11 | 3 pin 5/6 amps modular socket outlet, ISI marked. |
| 12 | Stepped type Modular Fan regulator (1 module). |
| 13 | Stepped type Fan regulator (1 module) piano type. |
| 14 | Pvc batten 25x16mm. |
| 15 | 6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity. |
| 16 | 32 amps, DP MCB, “C” curve, 10 KA breaking capacity. |
| 17 | 100 Amp FP MCCB, 30kA breaking capacity. |
| 18 | 63Amps, DP MCB 'C' curve 10 KA breaking capacity. |
| 19 | 25 mm dia pvc conduit. |
| 20 | 3 pin, 5/6 amps socket outlet, piano type ISI marked. |
| 21 | 16 amp 3 pin plug top. |
| 22 | 6 amp 3 pin plug top. |
| 23 | Pvc flexible conduit 25mm. |
| 24 | Remote control wireless call bell. |
| 25 | Supplying & replacement of suitable size of phenolic laminated sheet 3mm thick cover in front etc. as reqd. i/c cutting for switches / socket, fixing of piano type switch, connection testing etc. as required. |
| 26 | Supplying and replacement following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)16 way, Double door. |
| 27 | LED Batten light (System lumen efficacy >105<120lm/Watt)Supplying, installation, testing & commissioning of LED surface mounted Batten light of following body material and construction as per IS:10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating volatge AC 140-24 volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <10% P.F.> 0.95, IP-20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000 K/ 4000K/ 5700K/6000K/6500K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be relevant BIS standard and trade mark certificate (T.C.). Manufacturer Word Mark/Name Engraved/Embossing/Screen printing on housing complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >105<120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90OC). CRCA sheet body (thickness > 0.50mm)a) 18-22 watt |
| 28 | Comprehensive AMC of 50 LPH Water R.O. System installed at Subhash nagar DDA office Cpmplex i/c replacement of all spare parts ,TDS value got checked by TDS meter and submitting the TDS value certificate. |
| 29 | Repairing, rewinding & servicing of 1 HP single phase burnt out self priming monoblock pump set and refixing the same i/c labour cahrges connection testing, commissioning etc required. |
| 30 | Comprehensive AMC of water cooler 60 ltr/hr Capacity oiling of fan, cleaning of base plate with chemical and cleaning of water tank, and painting etc. complete as required i/c TDS value got checked by TDS meter and submitting the TDS value certificate. |
| 31 | Supplying and replacement with regulator cooler kit(fan motor) suitable for 18”/20” size desert cooler i/c dismantling of existing desert cooler kit(fan), connection, testing etc. complete as required. |
| 32 | Supplying and replacement of 18\\" x 20\\" desert cooler body having water tank made out of 20 SWG MS sheet with front grill, openable type side covers made out not less than 24 SWG suitable for 18\\"/20\\" sweep dia motor, selector switch, front grill one set wooden wool pads, 1/2 \\" distribution pipe, one plug top 15 amp and 3 core round wire 1.5 sq.mm. & PVC flexible pipe.i/c testing connection etc required. |
| 33 | Supplying and replacement of wood wool pad set (set of 3 pieces) with steel wire jail, suitable for 18”/20” desert cooler i/c disposing the existing pad, cleaning of water tank complete etc. as required. |
| 34 | Supplying and replacement of Submersible pump set suitable for 18”/20” desert cooler with 1mtr, wire i/c dismantling refixing, connection, testing etc complete as required. |
| 35 | Supplying & replacement of following capacity of capacitor in the existing desert cooler/fan i/c connection, testing etc complete as required. a) 4 MFD |
| 36 | b) 3.15 MFD |
| 37 | Brush Less Direct Current (BLDC) MotorSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos., canopies, shackle kit, safety rope, copper winding, steel/AI body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS: 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including saferty pin, nut bolts, washers, temperature rise = 75 degree C (max.) insulation resistance more than 2 mega ohm, suitbale for 230 V, 50 Hz, single phase AC Ceiling Fan complaint to IS 374:2019 fan supply, earhting etc. complete as req.a) 1200 mm, service value > 5.1 CM/Min/Watt, air delivery 130 CM/Min. |
| 38 | Supplying and replacement of 300 mm sweep size exhaust fan with complete in all respect with louvers suitable for single phase 230 volt,50 Hz AC supply i/c connection, testing etc. complete as required. |
| 39 | Dismantling the existing damaged /burn out ceiling fan of 1200 mm sweep and rewinding the same with copper winding and replacement of ball bearing etc. and fixing the ceiling fan i/c connection, testing complete as required. |
| 40 | Supplying & replacement of suitable size polycarbonated double combined junction box i/c providing & fixing 2 no. 6 pin 5/6 & 15/16 amp socket outlet & 2 no. 15/16 piano type switch, connections etc. complete as required. |
| 41 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).CRCA Sheet Body (Thickness ≥ 0.50 mm)36 watt Please Enable Macros to View BoQ information |
